Re: [syzbot] [erofs?] KMSAN: uninit-value in z_erofs_lz4_decompress (3)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

syzbot tried to test the proposed patch but the build/boot failed:

[    T1] NFS: Registering the id_resolver key type
[   20.847533][    T1] Key type id_resolver registered
[   20.852991][    T1] Key type id_legacy registered
[   20.859477][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   20.868251][    T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[   20.901326][    T1] Key type cifs.spnego registered
[   20.907727][    T1] Key type cifs.idmap registered
[   20.917413][    T1] ntfs: driver 2.1.32 [Flags: R/W].
[   20.923298][    T1] ntfs3: Max link count 4000
[   20.928297][    T1] ntfs3: Enabled Linux POSIX ACLs support
[   20.934148][    T1] ntfs3: Read-only LZX/Xpress compression included
[   20.941172][    T1] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[   20.947393][    T1] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[   20.953397][    T1] QNX4 filesystem 0.2.3 registered.
[   20.958982][    T1] qnx6: QNX6 filesystem 1.0.0 registered.
[   20.965985][    T1] fuse: init (API version 7.39)
[   20.976858][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[   20.985505][    T1] orangefs_init: module version upstream loaded
[   20.993572][    T1] JFS: nTxBlock = 8192, nTxLock = 65536
[   21.034087][    T1] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[   21.051635][    T1] 9p: Installing v9fs 9p2000 file system support
[   21.058997][    T1] NILFS version 2 loaded
[   21.063484][    T1] befs: version: 0.9.3
[   21.068879][    T1] ocfs2: Registered cluster interface o2cb
[   21.075961][    T1] ocfs2: Registered cluster interface user
[   21.083257][    T1] OCFS2 User DLM kernel interface loaded
[   21.102750][    T1] gfs2: GFS2 installed
[   21.142225][    T1] ceph: loaded (mds proto 32)
[   25.265679][    T1] NET: Registered PF_ALG protocol family
[   25.271965][    T1] xor: automatically using best checksumming function   avx       
[   25.280055][    T1] async_tx: api initialized (async)
[   25.285498][    T1] Key type asymmetric registered
[   25.290927][    T1] Asymmetric key parser 'x509' registered
[   25.296825][    T1] Asymmetric key parser 'pkcs8' registered
[   25.302732][    T1] Key type pkcs7_test registered
[   25.308482][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[   25.318600][    T1] io scheduler mq-deadline registered
[   25.324054][    T1] io scheduler kyber registered
[   25.331126][    T1] io scheduler bfq registered
[   25.347558][    T1] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   25.363347][  T136] kworker/u4:0 (136) used greatest stack depth: 11000 bytes left
[   25.374100][    T1] ACPI: button: Power Button [PWRF]
[   25.381760][    T1] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[   25.392277][    T1] ACPI: button: Sleep Button [SLPF]
[   25.414526][    T1] ioatdma: Intel(R) QuickData Technology Driver 5.00
[   25.499231][    T1] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[   25.505226][    T1] virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
[   25.579195][    T1] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[   25.585070][    T1] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[   25.662347][    T1] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[   25.668284][    T1] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
[   25.725221][    T1] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
[   26.750369][    T1] N_HDLC line discipline registered with maxframe=4096
[   26.758188][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   26.770021][    T1] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   26.799322][    T1] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   26.828884][    T1] 00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
[   26.856640][    T1] 00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
[   26.903869][    T1] Non-volatile memory driver v1.3
[   26.925949][    T1] Linux agpgart interface v0.103
[   26.944845][    T1] ACPI: bus type drm_connector registered
[   26.963460][    T1] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[   26.985308][    T1] [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
[   27.457414][    T1] Console: switching to colour frame buffer device 128x48
[   27.612960][    T1] platform vkms: [drm] fb0: vkmsdrmfb frame buffer device
[   27.621207][    T1] usbcore: registered new interface driver udl
[   27.785853][    T1] brd: module loaded
[   27.962515][    T1] loop: module loaded
[   28.204419][    T1] zram: Added device: zram0
[   28.227930][    T1] null_blk: disk nullb0 created
[   28.232984][    T1] null_blk: module loaded
[   28.238841][    T1] Guest personality initialized and is inactive
[   28.247691][    T1] VMCI host device registered (name=vmci, major=10, minor=118)
[   28.255558][    T1] Initialized host personality
[   28.261000][    T1] usbcore: registered new interface driver rtsx_usb
[   28.269847][    T1] usbcore: registered new interface driver viperboard
[   28.277538][    T1] usbcore: registered new interface driver dln2
[   28.284724][    T1] usbcore: registered new interface driver pn533_usb
[   28.297696][    T1] nfcsim 0.2 initialized
[   28.302508][    T1] usbcore: registered new interface driver port100
[   28.309540][    T1] usbcore: registered new interface driver nfcmrvl
[   28.325751][    T1] Loading iSCSI transport class v2.0-870.
[   28.358008][    T1] virtio_scsi virtio0: 1/0/0 default/read/poll queues
[   28.395519][    T1] scsi host0: Virtio SCSI HBA
[   28.917048][    T1] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[   28.933542][   T11] scsi 0:0:1:0: Direct-Access     Google   PersistentDisk   1    PQ: 0 ANSI: 6
[   28.978523][    T1] Rounding down aligned max_sectors from 4294967295 to 4294967288
[   28.988652][    T1] db_root: cannot open: /etc/target
[   29.035870][    T1] =====================================================
[   29.036118][    T1] BUG: KMSAN: use-after-free in __list_del_entry_valid_or_report+0x19e/0x490
[   29.036138][    T1]  __list_del_entry_valid_or_report+0x19e/0x490
[   29.036138][    T1]  stack_depot_save_flags+0x3e7/0x7b0
[   29.036138][    T1]  stack_depot_save+0x12/0x20
[   29.036138][    T1]  ref_tracker_alloc+0x215/0x700
[   29.036138][    T1]  netdev_hold+0xe2/0x120
[   29.036138][    T1]  register_netdevice+0x1bc7/0x2170
[   29.036138][    T1]  bond_create+0x138/0x2a0
[   29.036138][    T1]  bonding_init+0x1a7/0x2d0
[   29.036138][    T1]  do_one_initcall+0x216/0x960
[   29.036138][    T1]  do_initcall_level+0x140/0x350
[   29.036138][    T1]  do_initcalls+0xf0/0x1d0
[   29.036138][    T1]  do_basic_setup+0x22/0x30
[   29.036138][    T1]  kernel_init_freeable+0x300/0x4b0
[   29.036138][    T1]  kernel_init+0x2f/0x7e0
[   29.036138][    T1]  ret_from_fork+0x66/0x80
[   29.036138][    T1]  ret_from_fork_asm+0x11/0x20
[   29.036138][    T1] 
[   29.036138][    T1] Uninit was created at:
[   29.036138][    T1]  free_unref_page_prepare+0xc1/0xad0
[   29.036138][    T1]  free_unref_page+0x58/0x6d0
[   29.036138][    T1]  __free_pages+0xb1/0x1f0
[   29.036138][    T1]  thread_stack_free_rcu+0x97/0xb0
[   29.036138][    T1]  rcu_core+0xa3c/0x1df0
[   29.036138][    T1]  rcu_core_si+0x12/0x20
[   29.036138][    T1]  __do_softirq+0x1b7/0x7c3
[   29.036138][    T1] 
[   29.036138][    T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc2-syzkaller-g6764c317b6bb #0
[   29.036138][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
[   29.036138][    T1] =====================================================
[   29.036138][    T1] Disabling lock debugging due to kernel taint
[   29.036138][    T1] Kernel panic - not syncing: kmsan.panic set ...
[   29.036138][    T1] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B              6.8.0-rc2-syzkaller-g6764c317b6bb #0
[   29.036138][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
[   29.036138][    T1] Call Trace:
[   29.036138][    T1]  <TASK>
[   29.036138][    T1]  dump_stack_lvl+0x1bf/0x240
[   29.036138][    T1]  dump_stack+0x1e/0x20
[   29.036138][    T1]  panic+0x4de/0xc90
[   29.036138][    T1]  kmsan_report+0x2d0/0x2d0
[   29.036138][    T1]  ? cleanup_uevent_env+0x30/0x50
[   29.036138][    T1]  ? netdev_queue_update_kobjects+0x3f5/0x870
[   29.036138][    T1]  ? netdev_register_kobject+0x41e/0x520
[   29.036138][    T1]  ? register_netdevice+0x198f/0x2170
[   29.036138][    T1]  ? __msan_warning+0x96/0x110
[   29.036138][    T1]  ? __list_del_entry_valid_or_report+0x19e/0x490
[   29.036138][    T1]  ? stack_depot_save_flags+0x3e7/0x7b0
[   29.036138][    T1]  ? stack_depot_save+0x12/0x20
[   29.036138][    T1]  ? ref_tracker_alloc+0x215/0x700
[   29.036138][    T1]  ? netdev_hold+0xe2/0x120
[   29.036138][    T1]  ? register_netdevice+0x1bc7/0x2170
[   29.036138][    T1]  ? bond_create+0x138/0x2a0
[   29.036138][    T1]  ? bonding_init+0x1a7/0x2d0
[   29.036138][    T1]  ? do_one_initcall+0x216/0x960
[   29.036138][    T1]  ? do_initcall_level+0x140/0x350
[   29.036138][    T1]  ? do_initcalls+0xf0/0x1d0
[   29.036138][    T1]  ? do_basic_setup+0x22/0x30
[   29.036138][    T1]  ? kernel_init_freeable+0x300/0x4b0
[   29.036138][    T1]  ? kernel_init+0x2f/0x7e0
[   29.036138][    T1]  ? ret_from_fork+0x66/0x80
[   29.036138][    T1]  ? ret_from_fork_asm+0x11/0x20
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  ? filter_irq_stacks+0x60/0x1a0
[   29.036138][    T1]  ? stack_depot_save_flags+0x2c/0x7b0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  __msan_warning+0x96/0x110
[   29.036138][    T1]  __list_del_entry_valid_or_report+0x19e/0x490
[   29.036138][    T1]  stack_depot_save_flags+0x3e7/0x7b0
[   29.036138][    T1]  stack_depot_save+0x12/0x20
[   29.036138][    T1]  ref_tracker_alloc+0x215/0x700
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? netdev_hold+0xe2/0x120
[   29.036138][    T1]  ? register_netdevice+0x1bc7/0x2170
[   29.036138][    T1]  ? bond_create+0x138/0x2a0
[   29.036138][    T1]  ? bonding_init+0x1a7/0x2d0
[   29.036138][    T1]  ? do_one_initcall+0x216/0x960
[   29.036138][    T1]  ? do_initcall_level+0x140/0x350
[   29.036138][    T1]  ? do_initcalls+0xf0/0x1d0
[   29.036138][    T1]  ? do_basic_setup+0x22/0x30
[   29.036138][    T1]  ? kernel_init_freeable+0x300/0x4b0
[   29.036138][    T1]  ? kernel_init+0x2f/0x7e0
[   29.036138][    T1]  ? ret_from_fork+0x66/0x80
[   29.036138][    T1]  ? ret_from_fork_asm+0x11/0x20
[   29.036138][    T1]  ? kmsan_internal_unpoison_memory+0x14/0x20
[   29.036138][    T1]  netdev_hold+0xe2/0x120
[   29.036138][    T1]  register_netdevice+0x1bc7/0x2170
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  bond_create+0x138/0x2a0
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  bonding_init+0x1a7/0x2d0
[   29.036138][    T1]  ? spi_dln2_driver_init+0x40/0x40
[   29.036138][    T1]  do_one_initcall+0x216/0x960
[   29.036138][    T1]  ? spi_dln2_driver_init+0x40/0x40
[   29.036138][    T1]  ? kmsan_get_metadata+0x60/0x1c0
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  ? filter_irq_stacks+0x60/0x1a0
[   29.036138][    T1]  ? stack_depot_save_flags+0x2c/0x7b0
[   29.036138][    T1]  ? skip_spaces+0x8f/0xc0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  ? parse_args+0x1511/0x15e0
[   29.036138][    T1]  ? kmsan_get_metadata+0x146/0x1c0
[   29.036138][    T1]  ? kmsan_get_shadow_origin_ptr+0x4d/0xa0
[   29.036138][    T1]  ? spi_dln2_driver_init+0x40/0x40
[   29.036138][    T1]  do_initcall_level+0x140/0x350
[   29.036138][    T1]  do_initcalls+0xf0/0x1d0
[   29.036138][    T1]  ? arch_cpuhp_init_parallel_bringup+0xe0/0xe0
[   29.036138][    T1]  do_basic_setup+0x22/0x30
[   29.036138][    T1]  kernel_init_freeable+0x300/0x4b0
[   29.036138][    T1]  ? rest_init+0x260/0x260
[   29.036138][    T1]  kernel_init+0x2f/0x7e0
[   29.036138][    T1]  ? rest_init+0x260/0x260
[   29.036138][    T1]  ret_from_fork+0x66/0x80
[   29.036138][    T1]  ? rest_init+0x260/0x260
[   29.036138][    T1]  ret_from_fork_asm+0x11/0x20
[   29.036138][    T1]  </TASK>
[   29.036138][    T1] Kernel Offset: disabled


syzkaller build log:
go env (err=<nil>)
GO111MODULE='auto'
GOARCH='amd64'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFLAGS=''
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.21.4'
GCCGO='gccgo'
GOAMD64='v1'
AR='ar'
CC='gcc'
CXX='g++'
CGO_ENABLED='1'
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOWORK=''
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
PKG_CONFIG='pkg-config'
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build2170902610=/tmp/go-build -gno-record-gcc-switches'

git status (err=<nil>)
HEAD detached at 373b66cd2
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:32: run command via tools/syz-env for best compatibility, see:
Makefile:33: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' ./sys/syz-sysgen | grep -q false || go install ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=373b66cd2ba1fd05c72d0bbe16141fb287fe2eb3 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20240130-131205'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-fuzzer github.com/google/syzkaller/syz-fuzzer
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=373b66cd2ba1fd05c72d0bbe16141fb287fe2eb3 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20240130-131205'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=373b66cd2ba1fd05c72d0bbe16141fb287fe2eb3 -X 'github.com/google/syzkaller/prog.gitRevisionDate=20240130-131205'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-stress github.com/google/syzkaller/tools/syz-stress
mkdir -p ./bin/linux_amd64
gcc -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -fpermissive -w -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"373b66cd2ba1fd05c72d0bbe16141fb287fe2eb3\"


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=12b5bad3e80000


Tested on:

commit:         6764c317 Merge tag 'scsi-fixes' of git://git.kernel.or..
git tree:       upstream
kernel config:  https://syzkaller.appspot.com/x/.config?x=f8b2756f2e75608e
dashboard link: https://syzkaller.appspot.com/bug?extid=88ad8b0517a9d3bb9dc8
compiler:       Debian clang version 15.0.6, GNU ld (GNU Binutils for Debian) 2.40

Note: no patches were applied.





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux