Re: [RFC PATCH v1] mm/filemap: Allow arch to request folio size for exec memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jan 13, 2024 at 11:13 AM Barry Song <21cnbao@xxxxxxxxx> wrote:
>
> On Sat, Jan 13, 2024 at 12:15 AM Ryan Roberts <ryan.roberts@xxxxxxx> wrote:
> >
> > On 12/01/2024 10:13, Barry Song wrote:
> > > On Fri, Jan 12, 2024 at 4:41 AM Ryan Roberts <ryan.roberts@xxxxxxx> wrote:
> > >>
> > >> Change the readahead config so that if it is being requested for an
> > >> executable mapping, do a synchronous read of an arch-specified size in a
> > >> naturally aligned manner.
> > >>
> > >> On arm64 if memory is physically contiguous and naturally aligned to the
> > >> "contpte" size, we can use contpte mappings, which improves utilization
> > >> of the TLB. When paired with the "multi-size THP" changes, this works
> > >> well to reduce dTLB pressure. However iTLB pressure is still high due to
> > >> executable mappings having a low liklihood of being in the required
> > >> folio size and mapping alignment, even when the filesystem supports
> > >> readahead into large folios (e.g. XFS).
> > >>
> > >> The reason for the low liklihood is that the current readahead algorithm
> > >> starts with an order-2 folio and increases the folio order by 2 every
> > >> time the readahead mark is hit. But most executable memory is faulted in
> > >> fairly randomly and so the readahead mark is rarely hit and most
> > >> executable folios remain order-2. This is observed impirically and
> > >> confirmed from discussion with a gnu linker expert; in general, the
> > >> linker does nothing to group temporally accessed text together
> > >> spacially. Additionally, with the current read-around approach there are
> > >> no alignment guarrantees between the file and folio. This is
> > >> insufficient for arm64's contpte mapping requirement (order-4 for 4K
> > >> base pages).
> > >>
> > >> So it seems reasonable to special-case the read(ahead) logic for
> > >> executable mappings. The trade-off is performance improvement (due to
> > >> more efficient storage of the translations in iTLB) vs potential read
> > >> amplification (due to reading too much data around the fault which won't
> > >> be used), and the latter is independent of base page size. I've chosen
> > >> 64K folio size for arm64 which benefits both the 4K and 16K base page
> > >> size configs and shouldn't lead to any further read-amplification since
> > >> the old read-around path was (usually) reading blocks of 128K (with the
> > >> last 32K being async).
> > >>
> > >> Performance Benchmarking
> > >> ------------------------
> > >>
> > >> The below shows kernel compilation and speedometer javascript benchmarks
> > >> on Ampere Altra arm64 system. (The contpte patch series is applied in
> > >> the baseline).
> > >>
> > >> First, confirmation that this patch causes more memory to be contained
> > >> in 64K folios (this is for all file-backed memory so includes
> > >> non-executable too):
> > >>
> > >> | File-backed folios      |   Speedometer   |  Kernel Compile |
> > >> | by size as percentage   |-----------------|-----------------|
> > >> | of all mapped file mem  | before |  after | before |  after |
> > >> |=========================|========|========|========|========|
> > >> |file-thp-aligned-16kB    |    45% |     9% |    46% |     7% |
> > >> |file-thp-aligned-32kB    |     2% |     0% |     3% |     1% |
> > >> |file-thp-aligned-64kB    |     3% |    63% |     5% |    80% |
> > >> |file-thp-aligned-128kB   |    11% |    11% |     0% |     0% |
> > >> |file-thp-unaligned-16kB  |     1% |     0% |     3% |     1% |
> > >> |file-thp-unaligned-128kB |     1% |     0% |     0% |     0% |
> > >> |file-thp-partial         |     0% |     0% |     0% |     0% |
> > >> |-------------------------|--------|--------|--------|--------|
> > >> |file-cont-aligned-64kB   |    16% |    75% |     5% |    80% |
> > >>
> > >> The above shows that for both use cases, the amount of file memory
> > >> backed by 16K folios reduces and the amount backed by 64K folios
> > >> increases significantly. And the amount of memory that is contpte-mapped
> > >> significantly increases (last line).
> > >>
> > >> And this is reflected in performance improvement:
> > >>
> > >> Kernel Compilation (smaller is faster):
> > >> | kernel   |   real-time |   kern-time |   user-time |   peak memory |
> > >> |----------|-------------|-------------|-------------|---------------|
> > >> | before   |        0.0% |        0.0% |        0.0% |          0.0% |
> > >> | after    |       -1.6% |       -2.1% |       -1.7% |          0.0% |
> > >>
> > >> Speedometer (bigger is faster):
> > >> | kernel   |   runs_per_min |   peak memory |
> > >> |----------|----------------|---------------|
> > >> | before   |           0.0% |          0.0% |
> > >> | after    |           1.3% |          1.0% |
> > >>
> > >> Both benchmarks show a ~1.5% improvement once the patch is applied.
> > >>
> > >> Alternatives
> > >> ------------
> > >>
> > >> I considered (and rejected for now - but I anticipate this patch will
> > >> stimulate discussion around what the best approach is) alternative
> > >> approaches:
> > >>
> > >>   - Expose a global user-controlled knob to set the preferred folio
> > >>     size; this would move policy to user space and allow (e.g.) setting
> > >>     it to PMD-size for even better iTLB utilizaiton. But this would add
> > >>     ABI, and I prefer to start with the simplest approach first. It also
> > >>     has the downside that a change wouldn't apply to memory already in
> > >>     the page cache that is in active use (e.g. libc) so we don't get the
> > >>     same level of utilization as for something that is fixed from boot.
> > >>
> > >>   - Add a per-vma attribute to allow user space to specify preferred
> > >>     folio size for memory faulted from the range. (we've talked about
> > >>     such a control in the context of mTHP). The dynamic loader would
> > >>     then be responsible for adding the annotations. Again this feels
> > >>     like something that could be added later if value was demonstrated.
> > >>
> > >>   - Enhance MADV_COLLAPSE to collapse to THP sizes less than PMD-size.
> > >>     This would still require dynamic linker involvement, but would
> > >>     additionally neccessitate a copy and all memory in the range would
> > >>     be synchronously faulted in, adding to application load time. It
> > >>     would work for filesystems that don't support large folios though.
> > >>
> > >> Signed-off-by: Ryan Roberts <ryan.roberts@xxxxxxx>
> > >> ---
> > >>
> > >> Hi all,
> > >>
> > >> I originally concocted something similar to this, with Matthew's help, as a
> > >> quick proof of concept hack. Since then I've tried a few different approaches
> > >> but always came back to this as the simplest solution. I expect this will raise
> > >> a few eyebrows but given it is providing a real performance win, I hope we can
> > >> converge to something that can be upstreamed.
> > >>
> > >> This depends on my contpte series to actually set the contiguous bit in the page
> > >> table.
> > >>
> > >> Thanks,
> > >> Ryan
> > >>
> > >>
> > >>  arch/arm64/include/asm/pgtable.h | 12 ++++++++++++
> > >>  include/linux/pgtable.h          | 12 ++++++++++++
> > >>  mm/filemap.c                     | 19 +++++++++++++++++++
> > >>  3 files changed, 43 insertions(+)
> > >>
> > >> diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
> > >> index f5bf059291c3..8f8f3f7eb8d8 100644
> > >> --- a/arch/arm64/include/asm/pgtable.h
> > >> +++ b/arch/arm64/include/asm/pgtable.h
> > >> @@ -1143,6 +1143,18 @@ static inline void update_mmu_cache_range(struct vm_fault *vmf,
> > >>   */
> > >>  #define arch_wants_old_prefaulted_pte  cpu_has_hw_af
> > >>
> > >> +/*
> > >> + * Request exec memory is read into pagecache in at least 64K folios. The
> > >> + * trade-off here is performance improvement due to storing translations more
> > >> + * effciently in the iTLB vs the potential for read amplification due to reading
> > >> + * data from disk that won't be used. The latter is independent of base page
> > >> + * size, so we set a page-size independent block size of 64K. This size can be
> > >> + * contpte-mapped when 4K base pages are in use (16 pages into 1 iTLB entry),
> > >> + * and HPA can coalesce it (4 pages into 1 TLB entry) when 16K base pages are in
> > >> + * use.
> > >> + */
> > >> +#define arch_wants_exec_folio_order(void) ilog2(SZ_64K >> PAGE_SHIFT)
> > >> +
> > >>  static inline bool pud_sect_supported(void)
> > >>  {
> > >>         return PAGE_SIZE == SZ_4K;
> > >> diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
> > >> index 170925379534..57090616d09c 100644
> > >> --- a/include/linux/pgtable.h
> > >> +++ b/include/linux/pgtable.h
> > >> @@ -428,6 +428,18 @@ static inline bool arch_has_hw_pte_young(void)
> > >>  }
> > >>  #endif
> > >>
> > >> +#ifndef arch_wants_exec_folio_order
> > >> +/*
> > >> + * Returns preferred minimum folio order for executable file-backed memory. Must
> > >> + * be in range [0, PMD_ORDER]. Negative value implies that the HW has no
> > >> + * preference and mm will not special-case executable memory in the pagecache.
> > >> + */
> > >> +static inline int arch_wants_exec_folio_order(void)
> > >> +{
> > >> +       return -1;
> > >> +}
> > >> +#endif
> > >> +
> > >>  #ifndef arch_check_zapped_pte
> > >>  static inline void arch_check_zapped_pte(struct vm_area_struct *vma,
> > >>                                          pte_t pte)
> > >> diff --git a/mm/filemap.c b/mm/filemap.c
> > >> index 67ba56ecdd32..80a76d755534 100644
> > >> --- a/mm/filemap.c
> > >> +++ b/mm/filemap.c
> > >> @@ -3115,6 +3115,25 @@ static struct file *do_sync_mmap_readahead(struct vm_fault *vmf)
> > >>         }
> > >>  #endif
> > >>
> > >> +       /*
> > >> +        * Allow arch to request a preferred minimum folio order for executable
> > >> +        * memory. This can often be beneficial to performance if (e.g.) arm64
> > >> +        * can contpte-map the folio. Executable memory rarely benefits from
> > >> +        * read-ahead anyway, due to its random access nature.
> > >> +        */
> > >> +       if (vm_flags & VM_EXEC) {
> > >> +               int order = arch_wants_exec_folio_order();
> > >> +
> > >> +               if (order >= 0) {
> > >> +                       fpin = maybe_unlock_mmap_for_io(vmf, fpin);
> > >> +                       ra->size = 1UL << order;
> > >> +                       ra->async_size = 0;
> > >> +                       ractl._index &= ~((unsigned long)ra->size - 1);
> > >> +                       page_cache_ra_order(&ractl, ra, order);
> > >> +                       return fpin;
> > >> +               }
> > >> +       }
> > >
> > > I don't know, but most filesystems don't support large mapping,even iomap.
> >
> > True, but more are coming. For example ext4 is in the works:
> > https://lore.kernel.org/all/20240102123918.799062-1-yi.zhang@xxxxxxxxxxxxxxx/
>
> right, hopefully more filesystems will join.
>
> >
> > > This patch might negatively affect them. i feel we need to check
> > > mapping_large_folio_support() at least.
> >
> > page_cache_ra_order() does this check and falls back to small folios if needed.
> > So correctness-wise it all works out. I guess your concern is performance due to
> > effectively removing the async readahead aspect? But if that is a problem, then
> > it's not just a problem if we are reading small folios, so I don't think the
> > proposed check is correct.
>
> My point is that this patch is actually changing two things.
> 1. readahead index/size and async_size=0
> 2. try to use CONT-PTE
>
> for filesystems which support large mapping, we are getting 2 to help
> improve performance; for filesystems without large_mapping, 1 has
> been changed from losing read-around,
>         /*
>          * mmap read-around
>          */
>         fpin = maybe_unlock_mmap_for_io(vmf, fpin);
>         ra->start = max_t(long, 0, vmf->pgoff - ra->ra_pages / 2);
>         ra->size = ra->ra_pages;
>         ra->async_size = ra->ra_pages / 4;
>         ractl._index = ra->start;
>         page_cache_ra_order(&ractl, ra, 0);
>
> We probably need data to prove this makes no regression. otherwise,
> it is safer to let the code have no side effects on other file systems if
> we haven't data.
>
> >
> > Perhaps an alternative would be to double ra->size and set ra->async_size to
> > (ra->size / 2)? That would ensure we always have 64K aligned blocks but would
> > give us an async portion so readahead can still happen.
>
> this might be worth to try as PMD is exactly doing this because async
> can decrease
> the latency of subsequent page faults.
>
> #ifdef CONFIG_TRANSPARENT_HUGEPAGE
>         /* Use the readahead code, even if readahead is disabled */
>         if (vm_flags & VM_HUGEPAGE) {
>                 fpin = maybe_unlock_mmap_for_io(vmf, fpin);
>                 ractl._index &= ~((unsigned long)HPAGE_PMD_NR - 1);
>                 ra->size = HPAGE_PMD_NR;
>                 /*
>                  * Fetch two PMD folios, so we get the chance to actually
>                  * readahead, unless we've been told not to.
>                  */
>                 if (!(vm_flags & VM_RAND_READ))
>                         ra->size *= 2;
>                 ra->async_size = HPAGE_PMD_NR;
>                 page_cache_ra_order(&ractl, ra, HPAGE_PMD_ORDER);
>                 return fpin;
>         }
> #endif
>

BTW, rather than simply always reading backwards,  we did something very
"ugly" to simulate "read-around" for CONT-PTE exec before[1]

if page faults happen in the first half of cont-pte, we read this 64KiB
and its previous 64KiB. otherwise, we read it and its next 64KiB.

struct file *do_cont_pte_sync_mmap_readahead(struct vm_fault *vmf)
{
        ...
        unsigned long haddr = vmf->address & HPAGE_CONT_PTE_MASK;
        ...

        if (vmf->address <= haddr + HPAGE_CONT_PTE_SIZE / 2) {
                /* Readahead a hugepage forward */
                if (haddr - HPAGE_CONT_PTE_SIZE < vmf->vma->vm_start)
                        goto no_readahead;
                ra->start = ALIGN_DOWN(vmf->pgoff, HPAGE_CONT_PTE_NR)
- HPAGE_CONT_PTE_NR;
        } else {
                /* Readahead a hugepage backwards */
                if (haddr + 2 * HPAGE_CONT_PTE_SIZE > vmf->vma->vm_end)
                        goto no_readahead;
                ra->start = ALIGN_DOWN(vmf->pgoff, HPAGE_CONT_PTE_NR);
        }
        ra->size = 2 * HPAGE_CONT_PTE_NR;
         ...
}

the reason is if we are faulting in the 0nd and 1st subpage at address X,
it seems more sensible to read
aligned(X)- 64KiB           ~                 aligned(X) + 64KiB
than
aligned(X)         ~                 aligned(X) + 128KiB
?

[1] https://github.com/OnePlusOSS/android_kernel_oneplus_sm8550/blob/oneplus/sm8550_u_14.0.0_oneplus11/mm/cont_pte_hugepage.c#L2338

Thanks
Barry





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux