Weighted interleave is a new interleave policy intended to make use of a the new distributed-memory environment made available by CXL. The existing interleave mechanism does an even round-robin distribution of memory across all nodes in a nodemask, while weighted interleave can distribute memory across nodes according the available bandwidth that that node provides. As tests below show, "default interleave" can cause major performance degredation due to distribution not matching bandwidth available, while "weighted interleave" can provide a performance increase. For example, the stream benchmark demonstrates that default interleave is actively harmful, where weighted interleave is beneficial. Hardware: 1-socket 8 channel DDR5 + 1 CXL expander in PCIe x16 Default interleave : -78% (slower than DRAM) Global weighting : -6% to +4% (workload dependant) Targeted weights : +2.5% to +4% (consistently better than DRAM) If nothing else, this shows how awful round-robin interleave is. Rather than implement yet another specific syscall to set one particular field of a mempolicy, we chose to implement an extensible mempolicy interface so that future extensions can be captured. To implement weighted interleave, we need an interface to set the node weights along with a MPOL_WEIGHTED_INTERLEAVE. We implement a a sysfs extension for "system global" weights which can be set by a daemon or administrator, and new extensible syscalls (mempolicy2, mbind2) which allow task-local weights to be set via user-software. The benefit of the sysfs extension is that MPOL_WEIGHTED_INTERLEAVE can be used by the existing set_mempolicy and mbind via numactl. There are 3 "phases" in the patch set that could be considered for separate merge candidates, but are presented here as a single line as the goal is a fully functional MPOL_WEIGHTED_INTERLEAVE. 1) Implement MPOL_WEIGHTED_INTERLEAVE with a sysfs extension for setting system-global weights via sysfs. (Patches 1 & 2) 2) Refactor mempolicy creation mechanism to use an extensible arg struct `struct mempolicy_args` to promote code re-use between the original mempolicy/mbind interfaces and the new interfaces. (Patches 3-6) 3) Implementation of set_mempolicy2, get_mempolicy2, and mbind2, along with the addition of task-local weights so that per-task weights can be registered for MPOL_WEIGHTED_INTERLEAVE. (Patches 7-11) Included at the bottom of this cover letter is linux test project tests for backward and forward compatibility, some sample software which can be used for quick tests, as well as a numactl branch which implements `numactl -w --interleave` for testing. = Performance summary = (tests may have different configurations, see extended info below) 1) MLC (W2) : +38% over DRAM. +264% over default interleave. MLC (W5) : +40% over DRAM. +226% over default interleave. 2) Stream : -6% to +4% over DRAM, +430% over default interleave. 3) XSBench : +19% over DRAM. +47% over default interleave. = LTP Testing Summary = existing mempolicy & mbind tests: pass mempolicy & mbind + weighted interleave (global weights): pass mempolicy2 & mbind2 + weighted interleave (global weights): pass mempolicy2 & mbind2 + weighted interleave (local weights): pass = v5 (full notes at botton = - stupid mistake fixing arm64 build (get_mbind2 -> mbind2) - resolve ABI breakage within patch set. - remove MPOL_F_NODE functionality from mempolicy2 Suggested-by: Ying Huang <ying.huang@xxxxxxxxx> - Documentation and cover letter updates ===================================================================== Performance tests - MLC >From - Ravi Jonnalagadda <ravis.opensrc@xxxxxxxxxx> Hardware: Single-socket, multiple CXL memory expanders. Workload: W2 Data Signature: 2:1 read:write DRAM only bandwidth (GBps): 298.8 DRAM + CXL (default interleave) (GBps): 113.04 DRAM + CXL (weighted interleave)(GBps): 412.5 Gain over DRAM only: 1.38x Gain over default interleave: 2.64x Workload: W5 Data Signature: 1:1 read:write DRAM only bandwidth (GBps): 273.2 DRAM + CXL (default interleave) (GBps): 117.23 DRAM + CXL (weighted interleave)(GBps): 382.7 Gain over DRAM only: 1.4x Gain over default interleave: 2.26x ===================================================================== Performance test - Stream >From - Gregory Price <gregory.price@xxxxxxxxxxxx> Hardware: Single socket, single CXL expander numactl extension: https://github.com/gmprice/numactl/tree/weighted_interleave_master Summary: 64 threads, ~18GB workload, 3GB per array, executed 100 times Default interleave : -78% (slower than DRAM) Global weighting : -6% to +4% (workload dependant) mbind2 weights : +2.5% to +4% (consistently better than DRAM) dram only: numactl --cpunodebind=1 --membind=1 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Function Direction BestRateMBs AvgTime MinTime MaxTime Copy: 0->0 200923.2 0.032662 0.031853 0.033301 Scale: 0->0 202123.0 0.032526 0.031664 0.032970 Add: 0->0 208873.2 0.047322 0.045961 0.047884 Triad: 0->0 208523.8 0.047262 0.046038 0.048414 CXL-only: numactl --cpunodebind=1 -w --membind=2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Copy: 0->0 22209.7 0.288661 0.288162 0.289342 Scale: 0->0 22288.2 0.287549 0.287147 0.288291 Add: 0->0 24419.1 0.393372 0.393135 0.393735 Triad: 0->0 24484.6 0.392337 0.392083 0.394331 Based on the above, the optimal weights are ~9:1 echo 9 > /sys/kernel/mm/mempolicy/weighted_interleave/node1 echo 1 > /sys/kernel/mm/mempolicy/weighted_interleave/node2 default interleave: numactl --cpunodebind=1 --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Copy: 0->0 44666.2 0.143671 0.143285 0.144174 Scale: 0->0 44781.6 0.143256 0.142916 0.143713 Add: 0->0 48600.7 0.197719 0.197528 0.197858 Triad: 0->0 48727.5 0.197204 0.197014 0.197439 global weighted interleave: numactl --cpunodebind=1 -w --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc Copy: 0->0 190085.9 0.034289 0.033669 0.034645 Scale: 0->0 207677.4 0.031909 0.030817 0.033061 Add: 0->0 202036.8 0.048737 0.047516 0.053409 Triad: 0->0 217671.5 0.045819 0.044103 0.046755 targted regions w/ global weights (modified stream to mbind2 malloc'd regions)) numactl --cpunodebind=1 --membind=1 ./stream_c.exe -b --ntimes 100 --array-size 400M --malloc Copy: 0->0 205827.0 0.031445 0.031094 0.031984 Scale: 0->0 208171.8 0.031320 0.030744 0.032505 Add: 0->0 217352.0 0.045087 0.044168 0.046515 Triad: 0->0 216884.8 0.045062 0.044263 0.046982 ===================================================================== Performance tests - XSBench >From - Hyeongtak Ji <hyeongtak.ji@xxxxxx> Hardware: Single socket, Single CXL memory Expander NUMA node 0: 56 logical cores, 128 GB memory NUMA node 2: 96 GB CXL memory Threads: 56 Lookups: 170,000,000 Summary: +19% over DRAM. +47% over default interleave. Performance tests - XSBench 1. dram only $ numactl -m 0 ./XSBench -s XL –p 5000000 Runtime: 36.235 seconds Lookups/s: 4,691,618 2. default interleave $ numactl –i 0,2 ./XSBench –s XL –p 5000000 Runtime: 55.243 seconds Lookups/s: 3,077,293 3. weighted interleave numactl –w –i 0,2 ./XSBench –s XL –p 5000000 Runtime: 29.262 seconds Lookups/s: 5,809,513 ===================================================================== (Patch 1) : sysfs addition - /sys/kernel/mm/mempolicy/ This feature provides a way to set interleave weight information under sysfs at /sys/kernel/mm/mempolicy/weighted_interleave/ The sysfs structure is designed as follows. $ tree /sys/kernel/mm/mempolicy/ /sys/kernel/mm/mempolicy/ └── weighted_interleave ├── nodeN └── nodeN+X 'mempolicy' is added to '/sys/kernel/mm/' as a control group for the mempolicy subsystem. Internally, weights are represented as an array of unsigned char static unsigned char iw_table[MAX_NUMNODES]; char was chosen as most reasonable distributions can be represented as factors <100, and to minimize memory usage (1KB) We present possible nodes, instead of online nodes, to simplify the management interface, considering that a) the table is of size MAX_NUMNODES anyway to simplify fetching of weights (no need to track sizes, and MAX_NUMNODES is typically at most 1kb), and b) it simplifies management of hotplug events, allowing for weights to be set prior to a node coming online, which may be beneficial for immediate use. the 'weight' of a node (an unsigned char of value 1-255) is the number of pages that are allocated during a "weighted interleave" round. (See 'weighted interleave' for more details'). ===================================================================== (Patch 2) set_mempolicy: MPOL_WEIGHTED_INTERLEAVE Weighted interleave is a new memory policy that interleaves memory across numa nodes in the provided nodemask based on the weights described in patch 1 (sysfs global weights). When a system has multiple NUMA nodes and it becomes bandwidth hungry, the current MPOL_INTERLEAVE could be an wise option. However, if those NUMA nodes consist of different types of memory such as having local DRAM and CXL memory together, the current round-robin based interleaving policy doesn't maximize the overall bandwidth because of their different bandwidth characteristics. Instead, the interleaving can be more efficient when the allocation policy follows each NUMA nodes' bandwidth weight rather than having 1:1 round-robin allocation. This patch introduces a new memory policy, MPOL_WEIGHTED_INTERLEAVE, which enables weighted interleaving between NUMA nodes. Weighted interleave allows for a proportional distribution of memory across multiple numa nodes, preferablly apportioned to match the bandwidth capacity of each node from the perspective of the accessing node. For example, if a system has 1 CPU node (0), and 2 memory nodes (0,1), with a relative bandwidth of (100GB/s, 50GB/s) respectively, the appropriate weight distribution is (2:1). Weights will be acquired from the global weight array exposed by the sysfs extension: /sys/kernel/mm/mempolicy/weighted_interleave/ The policy will then allocate the number of pages according to the set weights. For example, if the weights are (2,1), then 2 pages will be allocated on node0 for every 1 page allocated on node1. The new flag MPOL_WEIGHTED_INTERLEAVE can be used in set_mempolicy(2) and mbind(2). ===================================================================== (Patches 3-6) Refactoring mempolicy for code-reuse To avoid multiple paths of mempolicy creation, we should refactor the existing code to enable the designed extensibility, and refactor existing users to utilize the new interface (while retaining the existing userland interface). This set of patches introduces a new mempolicy_args structure, which is used to more fully describe a requested mempolicy - to include existing and future extensions. /* * Describes settings of a mempolicy during set/get syscalls and * kernel internal calls to do_set_mempolicy() */ struct mempolicy_args { unsigned short mode; /* policy mode */ unsigned short mode_flags; /* policy mode flags */ int home_node; /* mbind: use MPOL_MF_HOME_NODE */ nodemask_t *policy_nodes; /* get/set/mbind */ unsigned char *il_weights; /* for mode MPOL_WEIGHTED_INTERLEAVE */ }; This arg structure will eventually be utilized by the following interfaces: mpol_new() - new mempolicy creation do_get_mempolicy() - acquiring information about mempolicy do_set_mempolicy() - setting the task mempolicy do_mbind() - setting a vma mempolicy do_get_mempolicy() is completely refactored to break it out into separate functionality based on the flags provided by get_mempolicy(2) MPOL_F_MEMS_ALLOWED: acquires task->mems_allowed MPOL_F_ADDR: acquires information on vma policies MPOL_F_NODE: changes the output for the policy arg to node info We refactor the get_mempolicy syscall flatten the logic based on these flags, and aloow for set_mempolicy2() to re-use the underlying logic. The result of this refactor, and the new mempolicy_args structure, is that extensions like 'sys_set_mempolicy_home_node' can now be directly integrated into the initial call to 'set_mempolicy2', and that more complete information about a mempolicy can be returned with a single call to 'get_mempolicy2', rather than multiple calls to 'get_mempolicy' ===================================================================== (Patches 7-10) set_mempolicy2, get_mempolicy2, mbind2 These interfaces are the 'extended' counterpart to their relatives. They use the userland 'struct mpol_args' structure to communicate a complete mempolicy configuration to the kernel. This structure looks very much like the kernel-internal 'struct mempolicy_args': struct mpol_args { /* Basic mempolicy settings */ __u16 mode; __u16 mode_flags; __s32 home_node; __u64 pol_maxnodes; __aligned_u64 pol_nodes; __aligned_u64 *il_weights; /* of size pol_maxnodes */ }; The basic mempolicy settings which are shared across all interfaces are captured at the top of the structure, while extensions such as 'policy_node' and 'addr' are collected beneath. The syscalls are uniform and defined as follows: long sys_mbind2(unsigned long addr, unsigned long len, struct mpol_args *args, size_t usize, unsigned long flags); long sys_get_mempolicy2(struct mpol_args *args, size_t size, unsigned long addr, unsigned long flags); long sys_set_mempolicy2(struct mpol_args *args, size_t size, unsigned long flags); The 'flags' argument for mbind2 is the same as 'mbind', except with the addition of MPOL_MF_HOME_NODE to denote whether the 'home_node' field should be utilized. The 'flags' argument for get_mempolicy2 allows for MPOL_F_ADDR to allow operating on VMA policies, but MPOL_F_NODE and MPOL_F_MEMS_ALLOWED behavior has been omitted, since get_mempolicy() provides this already. The 'flags' argument is not used by 'set_mempolicy' at this time, but may end up allowing the use of MPOL_MF_HOME_NODE if such functionality is desired. The extensions can be summed up as follows: get_mempolicy2 extensions: - mode and mode flags are split into separate fields - MPOL_F_MEMS_ALLOWED and MPOL_F_NODE are not supported set_mempolicy2: - task-local interleave weights can be set via 'il_weights' mbind2: - home_node field sets policy home node w/ MPOL_MF_HOME_NODE - task-local interleave weights can be set via 'il_weights' ===================================================================== (Patch 11) set_mempolicy2/mbind2: MPOL_WEIGHTED_INTERLEAVE This patch shows the explicit extension pattern when adding new policies to mempolicy2/mbind2. This adds the 'il_weights' field to mpol_args and adds the logic to fill in task-local weights. There are now two ways to weight a mempolicy: global and local. To denote which mode the task is in, we add the internal flag: MPOL_F_GWEIGHT /* Utilize global weights */ When MPOL_F_GWEIGHT is set, the global weights are used, and when it is not set, task-local weights are used. Example logic: if (pol->flags & MPOL_F_GWEIGHT) pol_weights = iw_table; else pol_weights = pol->wil.weights; set_mempolicy is changed to always set MPOL_F_GWEIGHT, since this syscall is incapable of passing weights via its interfaces, while set_mempolicy2 sets MPOL_F_GWEIGHT if MPOL_WEIGHTED_INTERLEAVE is requested but 'il_weights' in mpol_args is NULL. The operation of task-local weighted is otherwise exactly the same - except for what occurs on task migration. On task migration, the system presently has no way of determining what the new weights "should be", or what the user "intended". For this reason, we default all weights to '1' and do not allow weights to be '0'. This means, should a migration occur where one or more new nodes appear in the nodemask - the effective weight for that node will be '1'. This avoids a potential allocation failure condition if a migration occurs and introduces a node which otherwise did not have a weight. For this reason, users should use task-local weighting when migrations are not expected/possible, and global weighting when migrations are expected/possible. ===================================================================== Existing LTP Tests: https://github.com/gmprice/ltp/tree/mempolicy2 LTP set_mempolicy, get_mempolicy, mbind regression tests: MPOL_WEIGHTED_INTERLEAVE added manually to test basic functionality but did not adjust tests for weighting. Basically the weights were set to 1, which is the default, and it should behavior like standard MPOL_INTERLEAVE if logic is correct. == set_mempolicy01 passed 18 failed 0 == set_mempolicy02 passed 10 failed 0 == set_mempolicy03 passed 64 failed 0 == set_mempolicy04 passed 32 failed 0 == set_mempolicy05 - n/a on non-x86 == set_mempolicy06 - set_mempolicy02 + MPOL_WEIGHTED_INTERLEAVE passed 10 failed 0 == set_mempolicy07 - set_mempolicy04 + MPOL_WEIGHTED_INTERLEAVE passed 32 failed 0 == get_mempolicy01 - added MPOL_WEIGHTED_INTERLEAVE passed 12 failed 0 == get_mempolicy02 passed 2 failed 0 == mbind01 - added WEIGHTED_INTERLEAVE passed 15 failed 0 == mbind02 - added WEIGHTED_INTERLEAVE passed 4 failed 0 == mbind03 - added WEIGHTED_INTERLEAVE passed 16 failed 0 == mbind04 - added WEIGHTED_INTERLEAVE passed 48 failed 0 ===================================================================== New LTP Tests: https://github.com/gmprice/ltp/tree/mempolicy2 set_mempolicy2, get_mempolicy2, mbind2 Took the original set_mempolicy and get_mempolicy tests, and updated them to utilize the new mempolicy2 interfaces. Added additional tests for setting task-local weights to validate behavior. == set_mempolicy201 - set_mempolicy01 equiv passed 18 failed 0 == set_mempolicy202 - set_mempolicy02 equiv passed 10 failed 0 == set_mempolicy203 - set_mempolicy03 equiv passed 64 failed 0 == set_mempolicy204 - set_mempolicy04 equiv passed 32 failed 0 == set_mempolicy205 - set_mempolicy06 equiv passed 10 failed 0 == set_mempolicy206 - set_mempolicy07 equiv passed 32 failed 0 == set_mempolicy207 - MPOL_WEIGHTED_INTERLEAVE with task-local weights passed 6 failed 0 == get_mempolicy201 - get_mempolicy01 equiv passed 12 failed 0 == get_mempolicy202 - get_mempolicy02 equiv passed 2 failed 0 == get_mempolicy203 - NEW - fetch global and local weights passed 6 failed 0 == mbind201 - mbind01 equiv passed 15 failed 0 == mbind202 - mbind02 equiv passed 4 failed 0 == mbind203 - mbind03 equiv passed 16 failed 0 == mbind204 - mbind04 equiv passed 48 failed 0 ===================================================================== Basic set_mempolicy2 test set_mempolicy2 w/ weighted interleave, task-local weights and uses pthread_create to demonstrate the mempolicy is overwritten by child. Manually validating the distribution via numa_maps 007c0000 weighted interleave:0-1 heap anon=65794 dirty=65794 active=0 N0=54829 N1=10965 kernelpagesize_kB=4 7f3f2c000000 weighted interleave:0-1 anon=32768 dirty=32768 active=0 N0=5461 N1=27307 kernelpagesize_kB=4 7f3f34000000 weighted interleave:0-1 anon=16384 dirty=16384 active=0 N0=2731 N1=13653 kernelpagesize_kB=4 7f3f3bffe000 weighted interleave:0-1 anon=65538 dirty=65538 active=0 N0=10924 N1=54614 kernelpagesize_kB=4 7f3f5c000000 weighted interleave:0-1 anon=16384 dirty=16384 active=0 N0=2731 N1=13653 kernelpagesize_kB=4 7f3f60dfe000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=54615 N1=10922 kernelpagesize_kB=4 Expected distribution is 5:1 or 1:5 (less node should be ~16.666%) 1) 10965/65794 : 16.6656... pass 2) 5461/32768 : 16.6656... pass 3) 2731/16384 : 16.6687... pass 4) 10924/65538 : 16.6682... pass 5) 2731/16384 : 16.6687... pass 6) 10922/65537 : 16.6653... pass #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <numa.h> #include <errno.h> #include <numaif.h> #include <unistd.h> #include <pthread.h> #include <sys/uio.h> #include <sys/types.h> #include <stdint.h> #define MPOL_WEIGHTED_INTERLEAVE 6 #define SET_MEMPOLICY2(a, b) syscall(457, a, b, 0) #define M256 (1024*1024*256) #define PAGE_SIZE (4096) struct mpol_args { /* Basic mempolicy settings */ uint16_t mode; uint16_t mode_flags; int32_t home_node; uint64_t pol_maxnodes; uint64_t pol_nodes; uint64_t il_weights; }; struct mpol_args wil_args; struct bitmask *wil_nodes; unsigned char *weights; int total_nodes = -1; pthread_t tid; void set_mempolicy_call(int which) { weights = (unsigned char *)calloc(total_nodes, sizeof(unsigned char)); wil_nodes = numa_allocate_nodemask(); numa_bitmask_setbit(wil_nodes, 0); weights[0] = which ? 1 : 5; numa_bitmask_setbit(wil_nodes, 1); weights[1] = which ? 5 : 1; memset(&wil_args, 0, sizeof(wil_args)); wil_args.mode = MPOL_WEIGHTED_INTERLEAVE; wil_args.mode_flags = 0; wil_args.pol_nodes = wil_nodes->maskp; wil_args.pol_maxnodes = total_nodes; wil_args.il_weights = weights; int ret = SET_MEMPOLICY2(&wil_args, sizeof(wil_args)); fprintf(stderr, "set_mempolicy2 result: %d(%s)\n", ret, strerror(errno)); } void *func(void *arg) { char *mainmem = malloc(M256); int i; set_mempolicy_call(1); /* weight 1 heavier */ mainmem = malloc(M256); memset(mainmem, 1, M256); for (i = 0; i < (M256/PAGE_SIZE); i++) { mainmem = malloc(PAGE_SIZE); mainmem[0] = 1; } printf("thread done %d\n", getpid()); getchar(); return arg; } int main() { char * mainmem; int i; total_nodes = numa_max_node() + 1; set_mempolicy_call(0); /* weight 0 heavier */ pthread_create(&tid, NULL, func, NULL); mainmem = malloc(M256); memset(mainmem, 1, M256); for (i = 0; i < (M256/PAGE_SIZE); i++) { mainmem = malloc(PAGE_SIZE); mainmem[0] = 1; } printf("main done %d\n", getpid()); getchar(); return 0; } ===================================================================== numactl (set_mempolicy) w/ global weighting test numactl fork: https://github.com/gmprice/numactl/tree/weighted_interleave_master command: numactl -w --interleave=0,1 ./eatmem result (weights 1:1): 0176a000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=32897 N1=32896 kernelpagesize_kB=4 7fceeb9ff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=32768 N1=32769 kernelpagesize_kB=4 50% distribution is correct result (weights 5:1): 01b14000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=54828 N1=10965 kernelpagesize_kB=4 7f47a1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=54614 N1=10923 kernelpagesize_kB=4 16.666% distribution is correct result (weights 1:5): 01f07000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=10966 N1=54827 kernelpagesize_kB=4 7f17b1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=10923 N1=54614 kernelpagesize_kB=4 16.666% distribution is correct #include <stdio.h> #include <stdlib.h> #include <string.h> int main (void) { char* mem = malloc(1024*1024*256); memset(mem, 1, 1024*1024*256); for (int i = 0; i < ((1024*1024*256)/4096); i++) { mem = malloc(4096); mem[0] = 1; } printf("done\n"); getchar(); return 0; } ===================================================================== v4: - CONFIG_MMU COND_SYSCALL fix for mempolicy2/mbind2 syscalls - ifdef CONFIG_SYSFS handling. If sysfs is disabled, set global weights to 1 to have it default to standard interleave. - tools/perf config variation syscall table fix - sysfs attr init build fix - arch/arm64 syscall wire-ups (Thanks Arnd!) ===================================================================== v3: changes / adds: - get2(): actually fetch the il_weights (doh!) - get2(): retrieve home_node - get2(): addr as arg instead of struct member, drop MPOL_F_NODE flag get_mempolicy() can be used for this, don't duplicate warts - get2(): only copy weights if mode is weighted interleave - mbind2(): addr/len instead of iovec user can use a for loop... - sysfs: remove possible_nodes - sysfs: simplify to weighted_interleave/nodeN - sysfs: add default weight mechanism (echo > nodeN) fixes: - build: syscalls.h mpol_args definition missing - build: missing `__user` from weights_ptr definition - bug: uninitialized weight_total in bulk allocator - bug: bad pointer to copy_struct_from_user in mbind2 - bug: get_mempolicy2 uninitialized data copied to user - bug: get_vma_mempolicy policy reference counting - bug: MPOL_F_GWEIGHTS not set correctly in set_mempolicy2 - bug: MPOL_F_GWEIGHTS not set correctly in mbind2 - bug: get_mempolicy2 error not checked on nodemask userland copy - bug: mbind2 did not parse nodemask correctly tests: - ltp branch: https://github.com/gmprice/ltp/tree/mempolicy2 - new set_mempolicy2() tests 1) set_mempolicy() tests w/ new syscall 2) weighted interleave validation - new get_mempolicy2() tests 1) get_mempolicy() tests w/ new syscall 2) weighted interleave validation - new mbind2() tests 1) mbind() tests w/ new syscall - new performance tests (MLC) from Ravi @ Micron Example: Workload: W5 Data Signature: 1:1 read:write DRAM only bandwidth (GBps): 273.2 DRAM + CXL (default interleave) (GBps): 117.23 DRAM + CXL (weighted interleave)(GBps): 382.7 Gain over DRAM only: 1.4x ===================================================================== v2: changes / adds: - flatted weight matrix to an array at requested of Ying Huang - Updated ABI docs per Davidlohr Bueso request - change uapi structure to use aligned/fixed-length members - Implemented weight fetch logic in get_mempolicy2 - mbind2 was changed to take (iovec,len) as function arguments rather than add them to the uapi structure, since they describe where to apply the mempolicy - as opposed to being part of it. fixes: - fixed bug reported by Seungjun Ha <seungjun.ha@xxxxxxxxxxx> Link: https://lore.kernel.org/linux-cxl/20231206080944epcms2p76ebb230b9f4595f5cfcd2531d67ab3ce@epcms2p7/ - fixed bug in mbind2 where MPOL_F_GWEIGHTS was not set when il_weights was omitted after local weights were added as an option - fixed bug in interleave logic where an OOB access was made if next_node_in returned MAX_NUMNODES - fixed bug in bulk weighted interleave allocator where over-allocation could occur. tests: - LTP: validated existing get_mempolicy, set_mempolicy, and mbind tests - LTP: validated existing get_mempolicy, set_mempolicy, and mbind with MPOL_WEIGHTED_INTERLEAVE added. - basic set_mempolicy2 tests and numactl -w --interleave tests numactl: - Sample numactl extension for set_mempolicy available here: Link: https://github.com/gmprice/numactl/tree/weighted_interleave_master (added summary of test reports to end of cover letter) ===================================================================== Suggested-by: Gregory Price <gregory.price@xxxxxxxxxxxx> Suggested-by: Johannes Weiner <hannes@xxxxxxxxxxx> Suggested-by: Hasan Al Maruf <hasanalmaruf@xxxxxx> Suggested-by: Hao Wang <haowang3@xxxxxx> Suggested-by: Ying Huang <ying.huang@xxxxxxxxx> Suggested-by: Dan Williams <dan.j.williams@xxxxxxxxx> Suggested-by: Michal Hocko <mhocko@xxxxxxxx> Suggested-by: tj <tj@xxxxxxxxxx> Suggested-by: Zhongkun He <hezhongkun.hzk@xxxxxxxxxxxxx> Suggested-by: Frank van der Linden <fvdl@xxxxxxxxxx> Suggested-by: John Groves <john@xxxxxxxxxxxxxx> Suggested-by: Vinicius Tavares Petrucci <vtavarespetr@xxxxxxxxxx> Suggested-by: Srinivasulu Thanneeru <sthanneeru@xxxxxxxxxx> Suggested-by: Ravi Jonnalagadda <ravis.opensrc@xxxxxxxxxx> Suggested-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Suggested-by: Hyeongtak Ji <hyeongtak.ji@xxxxxx> Signed-off-by: Gregory Price <gregory.price@xxxxxxxxxxxx> Gregory Price (10): mm/mempolicy: introduce MPOL_WEIGHTED_INTERLEAVE for weighted interleaving mm/mempolicy: refactor sanitize_mpol_flags for reuse mm/mempolicy: create struct mempolicy_args for creating new mempolicies mm/mempolicy: refactor kernel_get_mempolicy for code re-use mm/mempolicy: allow home_node to be set by mpol_new mm/mempolicy: add userland mempolicy arg structure mm/mempolicy: add set_mempolicy2 syscall mm/mempolicy: add get_mempolicy2 syscall mm/mempolicy: add the mbind2 syscall mm/mempolicy: extend set_mempolicy2 and mbind2 to support weighted interleave Rakie Kim (1): mm/mempolicy: implement the sysfs-based weighted_interleave interface .../ABI/testing/sysfs-kernel-mm-mempolicy | 4 + ...fs-kernel-mm-mempolicy-weighted-interleave | 22 + .../admin-guide/mm/numa_memory_policy.rst | 67 ++ arch/alpha/kernel/syscalls/syscall.tbl | 3 + arch/arm/tools/syscall.tbl | 3 + arch/arm64/include/asm/unistd.h | 2 +- arch/arm64/include/asm/unistd32.h | 6 + arch/m68k/kernel/syscalls/syscall.tbl | 3 + arch/microblaze/kernel/syscalls/syscall.tbl | 3 + arch/mips/kernel/syscalls/syscall_n32.tbl | 3 + arch/mips/kernel/syscalls/syscall_o32.tbl | 3 + arch/parisc/kernel/syscalls/syscall.tbl | 3 + arch/powerpc/kernel/syscalls/syscall.tbl | 3 + arch/s390/kernel/syscalls/syscall.tbl | 3 + arch/sh/kernel/syscalls/syscall.tbl | 3 + arch/sparc/kernel/syscalls/syscall.tbl | 3 + arch/x86/entry/syscalls/syscall_32.tbl | 3 + arch/x86/entry/syscalls/syscall_64.tbl | 3 + arch/xtensa/kernel/syscalls/syscall.tbl | 3 + include/linux/mempolicy.h | 18 + include/linux/syscalls.h | 8 + include/uapi/asm-generic/unistd.h | 8 +- include/uapi/linux/mempolicy.h | 16 +- kernel/sys_ni.c | 3 + mm/mempolicy.c | 932 +++++++++++++++--- .../arch/mips/entry/syscalls/syscall_n64.tbl | 3 + .../arch/powerpc/entry/syscalls/syscall.tbl | 3 + .../perf/arch/s390/entry/syscalls/syscall.tbl | 3 + .../arch/x86/entry/syscalls/syscall_64.tbl | 3 + 29 files changed, 1024 insertions(+), 116 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm-mempolicy create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave -- 2.39.1
