Wu Fengguang, on 06/29/2009 04:54 PM wrote:
On Mon, Jun 29, 2009 at 06:55:40PM +0800, Vladislav Bolkhovitin wrote:
Ronald Moesbergen, on 06/29/2009 02:26 PM wrote:
2009/6/29 Wu Fengguang <fengguang.wu@xxxxxxxxx>:
On Sat, Jun 20, 2009 at 08:29:31PM +0800, Vladislav Bolkhovitin wrote:
Wu Fengguang, on 06/20/2009 07:55 AM wrote:
On Fri, Jun 19, 2009 at 03:04:36AM +0800, Andrew Morton wrote:
On Sun, 7 Jun 2009 06:45:38 +0800
Wu Fengguang <fengguang.wu@xxxxxxxxx> wrote:
Do you have a place where the raw blktrace data can be retrieved for
more in-depth analysis?
I think your comment is really adequate. In another thread, Wu Fengguang pointed
out the same issue.
I and Wu also wait his analysis.
And do it with a large readahead size :)
Alan, this was my analysis:
: Hifumi, can you help retest with some large readahead size?
:
: Your readahead size (128K) is smaller than your max_sectors_kb (256K),
: so two readahead IO requests get merged into one real IO, that means
: half of the readahead requests are delayed.
ie. two readahead requests get merged and complete together, thus the effective
IO size is doubled but at the same time it becomes completely synchronous IO.
:
: The IO completion size goes down from 512 to 256 sectors:
:
: before patch:
: 8,0 3 177955 50.050313976 0 C R 8724991 + 512 [0]
: 8,0 3 177966 50.053380250 0 C R 8725503 + 512 [0]
: 8,0 3 177977 50.056970395 0 C R 8726015 + 512 [0]
: 8,0 3 177988 50.060326743 0 C R 8726527 + 512 [0]
: 8,0 3 177999 50.063922341 0 C R 8727039 + 512 [0]
:
: after patch:
: 8,0 3 257297 50.000760847 0 C R 9480703 + 256 [0]
: 8,0 3 257306 50.003034240 0 C R 9480959 + 256 [0]
: 8,0 3 257307 50.003076338 0 C R 9481215 + 256 [0]
: 8,0 3 257323 50.004774693 0 C R 9481471 + 256 [0]
: 8,0 3 257332 50.006865854 0 C R 9481727 + 256 [0]
I haven't sent readahead-add-blk_run_backing_dev.patch in to Linus yet
and it's looking like 2.6.32 material, if ever.
If it turns out to be wonderful, we could always ask the -stable
maintainers to put it in 2.6.x.y I guess.
Agreed. The expected (and interesting) test on a properly configured
HW RAID has not happened yet, hence the theory remains unsupported.
Hmm, do you see anything improper in the Ronald's setup (see
http://sourceforge.net/mailarchive/forum.php?thread_name=a0272b440906030714g67eabc5k8f847fb1e538cc62%40mail.gmail.com&forum_name=scst-devel)?
It is HW RAID based.
No. Ronald's HW RAID performance is reasonably good. I meant Hifumi's
RAID performance is too bad and may be improved by increasing the
readahead size, hehe.
As I already wrote, we can ask Ronald to perform any needed tests.
Thanks! Ronald's test results are:
231 MB/s HW RAID
69.6 MB/s HW RAID + SCST
89.7 MB/s HW RAID + SCST + this patch
So this patch seem to help SCST, but again it would be better to
improve the SCST throughput first - it is now quite sub-optimal.
(Sorry for the long delay: currently I have not got an idea on
how to measure such timing issues.)
And if Ronald could provide the HW RAID performance with this patch,
then we can confirm if this patch really makes a difference for RAID.
I just tested raw HW RAID throughput with the patch applied, same
readahead setting (512KB), and it doesn't look promising:
./blockdev-perftest -d -r /dev/cciss/c0d0
blocksize W W W R R R
67108864 -1 -1 -1 5.59686 5.4098 5.45396
33554432 -1 -1 -1 6.18616 6.13232 5.96124
16777216 -1 -1 -1 7.6757 7.32139 7.4966
8388608 -1 -1 -1 8.82793 9.02057 9.01055
4194304 -1 -1 -1 12.2289 12.6804 12.19
2097152 -1 -1 -1 13.3012 13.706 14.7542
1048576 -1 -1 -1 11.7577 12.3609 11.9507
524288 -1 -1 -1 12.4112 12.2383 11.9105
262144 -1 -1 -1 7.30687 7.4417 7.38246
131072 -1 -1 -1 7.95752 7.95053 8.60796
65536 -1 -1 -1 10.1282 10.1286 10.1956
32768 -1 -1 -1 9.91857 9.98597 10.8421
16384 -1 -1 -1 10.8267 10.8899 10.8718
8192 -1 -1 -1 12.0345 12.5275 12.005
4096 -1 -1 -1 15.1537 15.0771 15.1753
2048 -1 -1 -1 25.432 24.8985 25.4303
1024 -1 -1 -1 45.2674 45.2707 45.3504
512 -1 -1 -1 87.9405 88.5047 87.4726
It dropped down to 189 MB/s. :(
Ronald,
Can you, please, rerun this test locally on the target with the latest
version of blockdev-perftest, which produces much more readable results,
Is blockdev-perftest public available? It's not obvious from google search.
for the following 6 cases:
1. Default vanilla 2.6.29 kernel, default parameters, including read-ahead
Why not 2.6.30? :)
We started with 2.6.29, so why not complete with it (to save additional
Ronald's effort to move on 2.6.30)?
2. Default vanilla 2.6.29 kernel, 512 KB read-ahead, the rest is default
How about 2MB RAID readahead size? That transforms into about 512KB
per-disk readahead size.
OK. Ronald, can you 4 more test cases, please:
7. Default vanilla 2.6.29 kernel, 2MB read-ahead, the rest is default
8. Default vanilla 2.6.29 kernel, 2MB read-ahead, 64 KB
max_sectors_kb, the rest is default
9. Patched by the Fengguang's patch vanilla 2.6.29 kernel, 2MB
read-ahead, the rest is default
10. Patched by the Fengguang's patch vanilla 2.6.29 kernel, 2MB
read-ahead, 64 KB max_sectors_kb, the rest is default
3. Default vanilla 2.6.29 kernel, 512 KB read-ahead, 64 KB
max_sectors_kb, the rest is default
4. Patched by the Fengguang's patch http://lkml.org/lkml/2009/5/21/319
vanilla 2.6.29 kernel, default parameters, including read-ahead
5. Patched by the Fengguang's patch vanilla 2.6.29 kernel, 512 KB
read-ahead, the rest is default
6. Patched by the Fengguang's patch vanilla 2.6.29 kernel, 512 KB
read-ahead, 64 KB max_sectors_kb, the rest is default
Thanks,
Fengguang
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
