Re: [PATCH v13 1/9] block: Introduce queue limits for copy-offload support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/06/28 03:40PM, Damien Le Moal wrote:
On 6/28/23 03:36, Nitesh Shetty wrote:
Add device limits as sysfs entries,
        - copy_offload (RW)
        - copy_max_bytes (RW)
        - copy_max_bytes_hw (RO)

Above limits help to split the copy payload in block layer.
copy_offload: used for setting copy offload(1) or emulation(0).
copy_max_bytes: maximum total length of copy in single payload.
copy_max_bytes_hw: Reflects the device supported maximum limit.

Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
Signed-off-by: Kanchan Joshi <joshi.k@xxxxxxxxxxx>
Signed-off-by: Anuj Gupta <anuj20.g@xxxxxxxxxxx>
---
 Documentation/ABI/stable/sysfs-block | 33 +++++++++++++++
 block/blk-settings.c                 | 24 +++++++++++
 block/blk-sysfs.c                    | 63 ++++++++++++++++++++++++++++
 include/linux/blkdev.h               | 12 ++++++
 include/uapi/linux/fs.h              |  3 ++
 5 files changed, 135 insertions(+)

diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
index c57e5b7cb532..3c97303f658b 100644
--- a/Documentation/ABI/stable/sysfs-block
+++ b/Documentation/ABI/stable/sysfs-block
@@ -155,6 +155,39 @@ Description:
 		last zone of the device which may be smaller.


+What:		/sys/block/<disk>/queue/copy_offload
+Date:		June 2023
+Contact:	linux-block@xxxxxxxxxxxxxxx
+Description:
+		[RW] When read, this file shows whether offloading copy to a
+		device is enabled (1) or disabled (0). Writing '0' to this
+		file will disable offloading copies for this device.
+		Writing any '1' value will enable this feature. If the device
+		does not support offloading, then writing 1, will result in an
+		error.

I am still not convinced that this one is really necessary. copy_max_bytes_hw !=
0 indicates that the devices supports copy offload. And setting copy_max_bytes
to 0 can be used to disable copy offload (which probably should be the default
for now).


Agreed, we will do this in next iteration.

+
+
+What:		/sys/block/<disk>/queue/copy_max_bytes
+Date:		June 2023
+Contact:	linux-block@xxxxxxxxxxxxxxx
+Description:
+		[RW] This is the maximum number of bytes that the block layer
+		will allow for a copy request. This will is always smaller or

will is -> is


acked

+		equal to the maximum size allowed by the hardware, indicated by
+		'copy_max_bytes_hw'. An attempt to set a value higher than
+		'copy_max_bytes_hw' will truncate this to 'copy_max_bytes_hw'.
+
+
+What:		/sys/block/<disk>/queue/copy_max_bytes_hw

Nit: In keeping with the spirit of attributes like
max_hw_sectors_kb/max_sectors_kb, I would call this one copy_max_hw_bytes.


acked, will update in next iteration.

+Date:		June 2023
+Contact:	linux-block@xxxxxxxxxxxxxxx
+Description:
+		[RO] This is the maximum number of bytes that the hardware
+		will allow for single data copy request.
+		A value of 0 means that the device does not support
+		copy offload.
+
+
 What:		/sys/block/<disk>/queue/crypto/
 Date:		February 2022
 Contact:	linux-block@xxxxxxxxxxxxxxx
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 4dd59059b788..738cd3f21259 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -59,6 +59,8 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->zoned = BLK_ZONED_NONE;
 	lim->zone_write_granularity = 0;
 	lim->dma_alignment = 511;
+	lim->max_copy_sectors_hw = 0;
+	lim->max_copy_sectors = 0;
 }

 /**
@@ -82,6 +84,8 @@ void blk_set_stacking_limits(struct queue_limits *lim)
 	lim->max_dev_sectors = UINT_MAX;
 	lim->max_write_zeroes_sectors = UINT_MAX;
 	lim->max_zone_append_sectors = UINT_MAX;
+	lim->max_copy_sectors_hw = UINT_MAX;
+	lim->max_copy_sectors = UINT_MAX;
 }
 EXPORT_SYMBOL(blk_set_stacking_limits);

@@ -183,6 +187,22 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
 }
 EXPORT_SYMBOL(blk_queue_max_discard_sectors);

+/**
+ * blk_queue_max_copy_sectors_hw - set max sectors for a single copy payload
+ * @q:  the request queue for the device
+ * @max_copy_sectors: maximum number of sectors to copy
+ **/
+void blk_queue_max_copy_sectors_hw(struct request_queue *q,
+		unsigned int max_copy_sectors)
+{
+	if (max_copy_sectors > (COPY_MAX_BYTES >> SECTOR_SHIFT))
+		max_copy_sectors = COPY_MAX_BYTES >> SECTOR_SHIFT;
+
+	q->limits.max_copy_sectors_hw = max_copy_sectors;
+	q->limits.max_copy_sectors = max_copy_sectors;
+}
+EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors_hw);
+
 /**
  * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase
  * @q:  the request queue for the device
@@ -578,6 +598,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->max_segment_size = min_not_zero(t->max_segment_size,
 					   b->max_segment_size);

+	t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors);
+	t->max_copy_sectors_hw = min(t->max_copy_sectors_hw,
+						b->max_copy_sectors_hw);
+
 	t->misaligned |= b->misaligned;

 	alignment = queue_limit_alignment_offset(b, start);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index afc797fb0dfc..43551778d035 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -199,6 +199,62 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }

+static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(blk_queue_copy(q), page);
+}
+
+static ssize_t queue_copy_offload_store(struct request_queue *q,
+				       const char *page, size_t count)
+{
+	unsigned long copy_offload;
+	ssize_t ret = queue_var_store(&copy_offload, page, count);
+
+	if (ret < 0)
+		return ret;
+
+	if (copy_offload && !q->limits.max_copy_sectors_hw)
+		return -EINVAL;
+
+	if (copy_offload)
+		blk_queue_flag_set(QUEUE_FLAG_COPY, q);
+	else
+		blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
+
+	return count;
+}

See above. I think we can drop this attribute.

acked

Thank you, Nitesh Shetty





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux