Re: [PATCH] readahead:add blk_run_backing_dev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 01, 2009 at 11:07:42AM +0800, Hisashi Hifumi wrote:
> 
> At 12:02 09/06/01, Wu Fengguang wrote:
> >On Mon, Jun 01, 2009 at 10:51:56AM +0800, Hisashi Hifumi wrote:
> >> 
> >> At 11:37 09/06/01, Wu Fengguang wrote:
> >> >On Wed, May 27, 2009 at 11:06:37AM +0800, Hisashi Hifumi wrote:
> >> >> 
> >> >> At 11:57 09/05/27, Wu Fengguang wrote:
> >> >> >On Wed, May 27, 2009 at 10:47:47AM +0800, Hisashi Hifumi wrote:
> >> >> >> 
> >> >> >> At 11:36 09/05/27, Wu Fengguang wrote:
> >> >> >> >On Wed, May 27, 2009 at 10:21:53AM +0800, Hisashi Hifumi wrote:
> >> >> >> >>
> >> >> >> >> At 11:09 09/05/27, Wu Fengguang wrote:
> >> >> >> >> >On Wed, May 27, 2009 at 08:25:04AM +0800, Hisashi Hifumi wrote:
> >> >> >> >> >>
> >> >> >> >> >> At 08:42 09/05/27, Andrew Morton wrote:
> >> >> >> >> >> >On Fri, 22 May 2009 10:33:23 +0800
> >> >> >> >> >> >Wu Fengguang <fengguang.wu@xxxxxxxxx> wrote:
> >> >> >> >> >> >
> >> >> >> >> >> >> > I tested above patch, and I got same performance number.
> >> >> >> >> >> >> > I wonder why if (PageUptodate(page)) check is there...
> >> >> >> >> >> >>
> >> >> >> >> >> >> Thanks!  This is an interesting micro timing behavior that
> >> >> >> >> >> >> demands some research work.  The above check is to confirm 
> >if it's
> >> >> >> >> >> >> the PageUptodate() case that makes the difference. So why 
> >that case
> >> >> >> >> >> >> happens so frequently so as to impact the performance? 
> >Will it also
> >> >> >> >> >> >> happen in NFS?
> >> >> >> >> >> >>
> >> >> >> >> >> >> The problem is readahead IO pipeline is not running smoothly, 
> >> >which is
> >> >> >> >> >> >> undesirable and not well understood for now.
> >> >> >> >> >> >
> >> >> >> >> >> >The patch causes a remarkably large performance increase.  A 9%
> >> >> >> >> >> >reduction in time for a linear read? I'd be surprised if the 
> >workload
> >> >> >> >> >>
> >> >> >> >> >> Hi Andrew.
> >> >> >> >> >> Yes, I tested this with dd.
> >> >> >> >> >>
> >> >> >> >> >> >even consumed 9% of a CPU, so where on earth has the kernel 
> >gone to?
> >> >> >> >> >> >
> >> >> >> >> >> >Have you been able to reproduce this in your testing?
> >> >> >> >> >>
> >> >> >> >> >> Yes, this test on my environment is reproducible.
> >> >> >> >> >
> >> >> >> >> >Hisashi, does your environment have some special configurations?
> >> >> >> >>
> >> >> >> >> Hi.
> >> >> >> >> My testing environment is as follows:
> >> >> >> >> Hardware: HP DL580
> >> >> >> >> CPU:Xeon 3.2GHz *4 HT enabled
> >> >> >> >> Memory:8GB
> >> >> >> >> Storage: Dothill SANNet2 FC (7Disks RAID-0 Array)
> >> >> >> >
> >> >> >> >This is a big hardware RAID. What's the readahead size?
> >> >> >> >
> >> >> >> >The numbers look too small for a 7 disk RAID:
> >> >> >> >
> >> >> >> >        > #dd if=testdir/testfile of=/dev/null bs=16384
> >> >> >> >        >
> >> >> >> >        > -2.6.30-rc6
> >> >> >> >        > 1048576+0 records in
> >> >> >> >        > 1048576+0 records out
> >> >> >> >        > 17179869184 bytes (17 GB) copied, 224.182 seconds, 76.6 MB/s
> >> >> >> >        >
> >> >> >> >        > -2.6.30-rc6-patched
> >> >> >> >        > 1048576+0 records in
> >> >> >> >        > 1048576+0 records out
> >> >> >> >        > 17179869184 bytes (17 GB) copied, 206.465 seconds, 83.2 MB/s
> >> >> >> >
> >> >> >> >I'd suggest you to configure the array properly before coming back to
> >> >> >> >measuring the impact of this patch.
> >> >> >> 
> >> >> >> 
> >> >> >> I created 16GB file to this disk array, and mounted to testdir, dd to 
> >> >> >this directory.
> >> >> >
> >> >> >I mean, you should get >300MB/s throughput with 7 disks, and you
> >> >> >should seek ways to achieve that before testing out this patch :-)
> >> >> 
> >> >> Throughput number of storage array is very from one product to another.
> >> >> On my hardware environment I think this number is valid and
> >> >> my patch is effective.
> >> >
> >> >What's your readahead size? Is it large enough to cover the stripe width?
> >> 
> >> Do you mean strage's readahead size?
> >
> >What's strage? I mean if your RAID's block device file is /dev/sda, then
> >
> >        blockdev --getra /dev/sda
> >
> >will tell its readahead size in unit of 512 bytes.
> 
> 256 sectors.

That's too small! Try this:

        blockdev --setra 8192 /dev/sda

Thanks,
Fengguang
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux