Re: [PATCH 1/3] mm: userfaultfd: add new UFFDIO_SIGBUS ioctl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 18, 2023 at 9:05 AM Peter Xu <peterx@xxxxxxxxxx> wrote:
>
> On Wed, May 17, 2023 at 05:43:53PM -0700, Jiaqi Yan wrote:
> > On Wed, May 17, 2023 at 3:29 PM Axel Rasmussen <axelrasmussen@xxxxxxxxxx> wrote:
> > >
> > > On Wed, May 17, 2023 at 3:20 PM Peter Xu <peterx@xxxxxxxxxx> wrote:
> > > >
> > > > On Wed, May 17, 2023 at 06:12:33PM -0400, Peter Xu wrote:
> > > > > On Thu, May 11, 2023 at 03:00:09PM -0700, James Houghton wrote:
> > > > > > On Thu, May 11, 2023 at 11:24 AM Axel Rasmussen
> > > > > > <axelrasmussen@xxxxxxxxxx> wrote:
> > > > > > >
> > > > > > > So the basic way to use this new feature is:
> > > > > > >
> > > > > > > - On the new host, the guest's memory is registered with userfaultfd, in
> > > > > > >   either MISSING or MINOR mode (doesn't really matter for this purpose).
> > > > > > > - On any first access, we get a userfaultfd event. At this point we can
> > > > > > >   communicate with the old host to find out if the page was poisoned.
> > > > > > > - If so, we can respond with a UFFDIO_SIGBUS - this places a swap marker
> > > > > > >   so any future accesses will SIGBUS. Because the pte is now "present",
> > > > > > >   future accesses won't generate more userfaultfd events, they'll just
> > > > > > >   SIGBUS directly.
> > > > > >
> > > > > > I want to clarify the SIGBUS mechanism here when KVM is involved,
> > > > > > keeping in mind that we need to be able to inject an MCE into the
> > > > > > guest for this to be useful.
> > > > > >
> > > > > > 1. vCPU gets an EPT violation --> KVM attempts GUP.
> > > > > > 2. GUP finds a PTE_MARKER_UFFD_SIGBUS and returns VM_FAULT_SIGBUS.
> > > > > > 3. KVM finds that GUP failed and returns -EFAULT.
> > > > > >
> > > > > > This is different than if GUP found poison, in which case KVM will
> > > > > > actually queue up a SIGBUS *containing the address of the fault*, and
> > > > > > userspace can use it to inject an appropriate MCE into the guest. With
> > > > > > UFFDIO_SIGBUS, we are missing the address!
> > > > > >
> > > > > > I see three options:
> > > > > > 1. Make KVM_RUN queue up a signal for any VM_FAULT_SIGBUS. I think
> > > > > > this is pointless.
> > > > > > 2. Don't have UFFDIO_SIGBUS install a PTE entry, but instead have a
> > > > > > UFFDIO_WAKE_MODE_SIGBUS, where upon waking, we return VM_FAULT_SIGBUS
> > > > > > instead of VM_FAULT_RETRY. We will keep getting userfaults on repeated
> > > > > > accesses, just like how we get repeated signals for real poison.
> > > > > > 3. Use this in conjunction with the additional KVM EFAULT info that
> > > > > > Anish proposed (the first part of [1]).
> > > > > >
> > > > > > I think option 3 is fine. :)
> > > > >
> > > > > Or... option 4) just to use either MADV_HWPOISON or hwpoison-inject? :)
> > > >
> > > > I just remember Axel mentioned this in the commit message, and just in case
> > > > this is why option 4) was ruled out:
> > > >
> > > >         They expect that once poisoned, pages can never become
> > > >         "un-poisoned". So, when we live migrate the VM, we need to preserve
> > > >         the poisoned status of these pages.
> > > >
> > > > Just to supplement on this point: we do have unpoison (echoing to
> > > > "debug/hwpoison/hwpoison_unpoison"), or am I wrong?
> >
> > If I read unpoison_memory() correctly, once there is a real hardware
> > memory corruption (hw_memory_failure will be set), unpoison will stop
> > working and return EOPNOTSUPP.
> >
> > I know some cloud providers evacuating VMs once a single memory error
> > happens, so not supporting unpoison is probably not a big deal for
> > them. BUT others do keep VM running until more errors show up later,
> > which could be long after the 1st error.
>
> We're talking about postcopy migrating a VM has poisoned page on src,
> rather than on dst host, am I right?  IOW, the dest hwpoison should be
> fake.
>
> If so, then I would assume that's the case where all the pages on the dest
> host is still all good (so hw_memory_failure not yet set, or I doubt the
> judgement of being a migration target after all)?
>
> The other thing is even if dest host has hw poisoned page, I'm not sure
> whether hw_memory_failure is the only way to solve this.
>
> I saw that this is something got worked on before from Zhenwei, David used
> to have some reasoning on why it was suggested like using a global knob:
>
> https://lore.kernel.org/all/d7927214-e433-c26d-7a9c-a291ced81887@xxxxxxxxxx/
>
> Two major issues here afaics:
>
>   - Zhenwei's approach only considered x86 hwpoison - it relies on kpte
>     having !present in entries but that's x86 specific rather than generic
>     to memory_failure.c.
>
>   - It is _assumed_ that hwpoison injection is for debugging only.
>
> I'm not sure whether you can fix 1) by some other ways, e.g., what if the
> host just remember all the hardware poisoned pfns (or remember
> soft-poisoned ones, but then here we need to be careful on removing them
> from the list when it's hwpoisoned for real)?  It sounds like there's
> opportunity on providing a generic solution rather than relying on
> !pte_present().
>
> For 2) IMHO that's not a big issue, you can declare it'll be used in !debug
> but production systems so as to boost the feature importance with a real
> use case.
>
> So far I'd say it'll be great to leverage what it's already there in linux
> and make it as generic as possible. The only issue is probably
> CAP_ADMIN... not sure whether we can have some way to provide !ADMIN
> somehow, or you can simply work around this issue.

As you mention below I think the key distinction is the scope - I
think MADV_HWPOISON affects the whole system, including other
processes.

For our purposes, we really just want to "poison" this particular
virtual address (the HVA, from the VM's perspective), not even other
mappings of the same shared memory. I think that behavior is different
from MADV_HWPOISON, at least.

>
> >
> > > >
> > > > >
> > > > > Besides what James mentioned on "missing addr", I didn't quickly see what's
> > > > > the major difference comparing to the old hwpoison injection methods even
> > > > > without the addr requirement. If we want the addr for MCE then it's more of
> > > > > a question to ask.
> > > > >
> > > > > I also didn't quickly see why for whatever new way to inject a pte error we
> > > > > need to have it registered with uffd.  Could it be something like
> > > > > MADV_PGERR (even if MADV_HWPOISON won't suffice) so you can inject even
> > > > > without an userfault context (but still usable when uffd registered)?
> > > > >
> > > > > And it'll be alawys nice to have a cover letter too (if there'll be a new
> > > > > version) explaining the bits.
> > >
> > > I do plan a v2, if for no other reason than to update the
> > > documentation. Happy to add a cover letter with it as well.
> > >
> > > +Jiaqi back to CC, this is one piece of a larger memory poisoning /
> > > recovery design Jiaqi is working on, so he may have some ideas why
> > > MADV_HWPOISON or MADV_PGER will or won't work.
> >
> > Per https://man7.org/linux/man-pages/man2/madvise.2.html,
> > MADV_HWPOISON "is available only for privileged (CAP_SYS_ADMIN)
> > processes." So for a non-root VMM, MADV_HWPOISON is out of option.
>
> It makes sense to me especially when the page can be shared with other
> tasks.
>
> >
> > Another issue with MADV_HWPOISON is, it requires to first successfully
> > get_user_pages_fast(). I don't think it will work if memory is not
> > mapped yet.
>
> Fair point, so probably current MADV_HWPOISON got ruled out.
> hwpoison-inject seems fine where only the PFN is needed rather than the
> pte. But same issue on CAP_ADMIN indeed.
>
> >
> > With the UFFDIO_SIGBUS feature introduced in this patchset, it may
> > even be possible to free the emulated-hwpoison page back to the kernel
> > so we don't lose a 4K page.
> >
> > I didn't find any ref/doc for MADV_PGERR. Is it something you suggest
> > to build, Peter?
>
> That's something I made up just to show my question on why such an
> interface (even if wanted) needs to be bound to userfaultfd, e.g. a
> madvise() seems working if someone sololy want to install a poisoned pte.

I look at it a bit differently...

Even existing UFFDIO_* operations could technically be separated from
userfaultfd. You could imagine a MADV_MAP_PAGE instead of
UFFDIO_CONTINUE. UFFDIO_COPY is a bit trickier since it takes an
argument, but it could be done with process_madvise(). (Granted, I'm
not sure this would be useful... But this is equally true for
UFFDIO_SIGBUS; it seems non-live-migration use cases could use
MADV_HWPOISON, and for live migration use cases we will be using
UFFD.)

We've sort of setup a convention with userfaultfd where at a high
level users are supposed to:

1. Receive events from the uffd
2. Resolve those events with UFFDIO_* ioctls
3. Wake up with UFFDIO_WAKE to retry the fault that generated the
original event (can be combined with step 2 of course)

So for me, even if MADV_PGERR or similar existed, I would be tempted
to add a UFFDIO_SIGBUS as well, even if it just calls the same
underlying function to do the same thing, if only for consistency
(with the idea "UFFD events are resolved by UFFD ioctls") from the
user's perspective.


>
> IIUC even with an madvise one may not need CAP_ADMIN since we can limit the
> op to current mm only, I assume it's safe.
>
> Here you'd want to return VM_FAULT_HWPOISON for whatever swap pte you'd
> like to install (in do_swap_page) with whatever new interface (assuming
> still a new madvise). As James mentioned, I think KVM liked that to
> recognize -EHWPOISON from -EFAULT.  I'd say we can even consider reusing
> PTE_MARKER_SWAPIN_ERROR to let it just return VM_FAULT_HWPOISON directly if
> so.
>
> Thanks,
>
> --
> Peter Xu
>




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux