Re: [PATCH v3 6/7] mm: truncate: split huge page cache page to a non-zero order if possible.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16 Apr 2023, at 15:44, Hugh Dickins wrote:

> On Mon, 3 Apr 2023, Zi Yan wrote:
>
>> From: Zi Yan <ziy@xxxxxxxxxx>
>>
>> To minimize the number of pages after a huge page truncation, we do not
>> need to split it all the way down to order-0. The huge page has at most
>> three parts, the part before offset, the part to be truncated, the part
>> remaining at the end. Find the greatest common divisor of them to
>> calculate the new page order from it, so we can split the huge
>> page to this order and keep the remaining pages as large and as few as
>> possible.
>>
>> Signed-off-by: Zi Yan <ziy@xxxxxxxxxx>
>> ---
>>  mm/truncate.c | 21 +++++++++++++++++++--
>>  1 file changed, 19 insertions(+), 2 deletions(-)
>>
>> diff --git a/mm/truncate.c b/mm/truncate.c
>> index 86de31ed4d32..817efd5e94b4 100644
>> --- a/mm/truncate.c
>> +++ b/mm/truncate.c
>> @@ -22,6 +22,7 @@
>>  #include <linux/buffer_head.h>	/* grr. try_to_release_page */
>>  #include <linux/shmem_fs.h>
>>  #include <linux/rmap.h>
>> +#include <linux/gcd.h>
>
> Really?
>
>>  #include "internal.h"
>>
>>  /*
>> @@ -211,7 +212,8 @@ int truncate_inode_folio(struct address_space *mapping, struct folio *folio)
>>  bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
>>  {
>>  	loff_t pos = folio_pos(folio);
>> -	unsigned int offset, length;
>> +	unsigned int offset, length, remaining;
>> +	unsigned int new_order = folio_order(folio);
>>
>>  	if (pos < start)
>>  		offset = start - pos;
>> @@ -222,6 +224,7 @@ bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
>>  		length = length - offset;
>>  	else
>>  		length = end + 1 - pos - offset;
>> +	remaining = folio_size(folio) - offset - length;
>>
>>  	folio_wait_writeback(folio);
>>  	if (length == folio_size(folio)) {
>> @@ -236,11 +239,25 @@ bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
>>  	 */
>>  	folio_zero_range(folio, offset, length);
>>
>> +	/*
>> +	 * Use the greatest common divisor of offset, length, and remaining
>> +	 * as the smallest page size and compute the new order from it. So we
>> +	 * can truncate a subpage as large as possible. Round up gcd to
>> +	 * PAGE_SIZE, otherwise ilog2 can give -1 when gcd/PAGE_SIZE is 0.
>> +	 */
>> +	new_order = ilog2(round_up(gcd(gcd(offset, length), remaining),
>> +				   PAGE_SIZE) / PAGE_SIZE);
>
> Gosh.  In mm/readahead.c I can see "order = __ffs(index)",
> and I think something along those lines would be more appropriate here.
>
> But, if there's any value at all to choosing intermediate orders here in
> truncation, I don't think choosing a single order is the right approach -
> more easily implemented, yes, but is it worth doing?
>
> What you'd actually want (if anything) is to choose the largest orders
> possible, with smaller and smaller orders filling in the rest (I expect
> there's a technical name for this, but I don't remember - bin packing
> is something else, I think).
>
> As this code stands, truncate a 2M huge page at 1M and you get two 1M
> pieces (one then discarded) - nice; but truncate it at 1M+1 and you get
> lots of order 2 (forced up from 1) pieces.  Seems weird, and not worth
> the effort.

The approach I am adding here is the simplest way of splitting a folio
and trying to get >0 order folios after the split.

Yes, I agree that using "__ffs(index)" can create more >0 order folios, but
it comes with either more runtime overheads or more code changes. Like
your "1MB + 1" page split example, using "__ffs(index)", ideally, you will
split 2MB into 2 1MBs, then 1MB into 2 512KBs, ..., 8KB into 2 4KBs and
at the end of the day, we will have 1MB, 512KB, ..., 8KB each and two 2 4KBs,
maximizing the number of >0 order folios. But what is the cost?

1. To minimizing code changes, we then need to call
split_huge_page_to_list_to_order() 9 times from new_order=8 to new_order=0.
Since each split needs to unmap and remap the target folio, we shall see
9 TLB shutdowns. I am not sure it is worth the cost.

2. To get rid of the unmap and remap overheads, we probably can unmap
the folio, then do all the 9 splits, then remap all the split pages. But
this would make split_huge_page() a lot more complicated and I am not sure
a good way of passing split order information and the corresponding
to-be-split subpages. Do we need a dynamic list to store them, making
new memory allocations a prerequisite of split_huge_page()? Maybe we can
encode in the split information in two ints? In the first one,
each bit tells which order to split the page (like order=__ffs(index))
and in the second one, each bit tells which subpage to split next (0 means
the left subpage, 1 means the right subpage). So your "1MB + 1" page split
will be encoded as 0b111111111 (first int), 0b1000000 (second int and
it has 1 fewer bit, since first split does not need to know which subpage
to split).

What do you think? If you have a better idea, I am all ears. And if you
are willing to help me review the more complicated code changes, I am
more than happy to implement it in the next version. :)

Thank you for your comments. They are very helpful!

>
> Hugh
>
>> +
>> +	/* order-1 THP not supported, downgrade to order-0 */
>> +	if (new_order == 1)
>> +		new_order = 0;
>> +
>> +
>>  	if (folio_has_private(folio))
>>  		folio_invalidate(folio, offset, length);
>>  	if (!folio_test_large(folio))
>>  		return true;
>> -	if (split_folio(folio) == 0)
>> +	if (split_huge_page_to_list_to_order(&folio->page, NULL, new_order) == 0)
>>  		return true;
>>  	if (folio_test_dirty(folio))
>>  		return false;
>> -- 
>> 2.39.2


--
Best Regards,
Yan, Zi

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux