Re: [PATCH v2 3/7] fs: Introduce FALLOC_FL_PROVISION

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 29, 2022 at 12:12:48AM -0800, Sarthak Kukreti wrote:
> FALLOC_FL_PROVISION is a new fallocate() allocation mode that
> sends a hint to (supported) thinly provisioned block devices to
> allocate space for the given range of sectors via REQ_OP_PROVISION.
> 
> The man pages for both fallocate(2) and posix_fallocate(3) describe
> the default allocation mode as:
> 
> ```
> The default operation (i.e., mode is zero) of fallocate()
> allocates the disk space within the range specified by offset and len.
> ...
> subsequent writes to bytes in the specified range are guaranteed
> not to fail because of lack of disk space.
> ```
> 
> For thinly provisioned storage constructs (dm-thin, filesystems on sparse
> files), the term 'disk space' is overloaded and can either mean the apparent
> disk space in the filesystem/thin logical volume or the true disk
> space that will be utilized on the underlying non-sparse allocation layer.
> 
> The use of a separate mode allows us to cleanly disambiguate whether fallocate()
> causes allocation only at the current layer (default mode) or whether it propagates
> allocations to underlying layers (provision mode)

Why is it important to make this distinction?  The outcome of fallocate
is supposed to be that subsequent writes do not fail with ENOSPC.  In my
(fs developer) mind, REQ_OP_PROVISION simply an extra step to be taken
after allocating file blocks.

If you *don't* add this API flag and simply bake the REQ_OP_PROVISION
call into mode 0 fallocate, then the new functionality can be added (or
even backported) to existing kernels and customers can use it
immediately.  If you *do*, then you get to wait a few years for
developers to add it to their codebases only after enough enterprise
distros pick up a new kernel to make it worth their while.

> for thinly provisioned filesystems/
> block devices. For devices that do not support REQ_OP_PROVISION, both these
> allocation modes will be equivalent. Given the performance cost of sending provision
> requests to the underlying layers, keeping the default mode as-is allows users to
> preserve existing behavior.

How expensive is this expected to be?  Is this why you wanted a separate
mode flag?

--D

> Signed-off-by: Sarthak Kukreti <sarthakkukreti@xxxxxxxxxxxx>
> ---
>  block/fops.c                | 15 +++++++++++----
>  include/linux/falloc.h      |  3 ++-
>  include/uapi/linux/falloc.h |  8 ++++++++
>  3 files changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/block/fops.c b/block/fops.c
> index 50d245e8c913..01bde561e1e2 100644
> --- a/block/fops.c
> +++ b/block/fops.c
> @@ -598,7 +598,8 @@ static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
>  
>  #define	BLKDEV_FALLOC_FL_SUPPORTED					\
>  		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |		\
> -		 FALLOC_FL_ZERO_RANGE | FALLOC_FL_NO_HIDE_STALE)
> +		 FALLOC_FL_ZERO_RANGE | FALLOC_FL_NO_HIDE_STALE |	\
> +		 FALLOC_FL_PROVISION)
>  
>  static long blkdev_fallocate(struct file *file, int mode, loff_t start,
>  			     loff_t len)
> @@ -634,9 +635,11 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
>  	filemap_invalidate_lock(inode->i_mapping);
>  
>  	/* Invalidate the page cache, including dirty pages. */
> -	error = truncate_bdev_range(bdev, file->f_mode, start, end);
> -	if (error)
> -		goto fail;
> +	if (mode != FALLOC_FL_PROVISION) {
> +		error = truncate_bdev_range(bdev, file->f_mode, start, end);
> +		if (error)
> +			goto fail;
> +	}
>  
>  	switch (mode) {
>  	case FALLOC_FL_ZERO_RANGE:
> @@ -654,6 +657,10 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
>  		error = blkdev_issue_discard(bdev, start >> SECTOR_SHIFT,
>  					     len >> SECTOR_SHIFT, GFP_KERNEL);
>  		break;
> +	case FALLOC_FL_PROVISION:
> +		error = blkdev_issue_provision(bdev, start >> SECTOR_SHIFT,
> +					       len >> SECTOR_SHIFT, GFP_KERNEL);
> +		break;
>  	default:
>  		error = -EOPNOTSUPP;
>  	}
> diff --git a/include/linux/falloc.h b/include/linux/falloc.h
> index f3f0b97b1675..b9a40a61a59b 100644
> --- a/include/linux/falloc.h
> +++ b/include/linux/falloc.h
> @@ -30,7 +30,8 @@ struct space_resv {
>  					 FALLOC_FL_COLLAPSE_RANGE |	\
>  					 FALLOC_FL_ZERO_RANGE |		\
>  					 FALLOC_FL_INSERT_RANGE |	\
> -					 FALLOC_FL_UNSHARE_RANGE)
> +					 FALLOC_FL_UNSHARE_RANGE |	\
> +					 FALLOC_FL_PROVISION)
>  
>  /* on ia32 l_start is on a 32-bit boundary */
>  #if defined(CONFIG_X86_64)
> diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
> index 51398fa57f6c..2d323d113eed 100644
> --- a/include/uapi/linux/falloc.h
> +++ b/include/uapi/linux/falloc.h
> @@ -77,4 +77,12 @@
>   */
>  #define FALLOC_FL_UNSHARE_RANGE		0x40
>  
> +/*
> + * FALLOC_FL_PROVISION acts as a hint for thinly provisioned devices to allocate
> + * blocks for the range/EOF.
> + *
> + * FALLOC_FL_PROVISION can only be used with allocate-mode fallocate.
> + */
> +#define FALLOC_FL_PROVISION		0x80
> +
>  #endif /* _UAPI_FALLOC_H_ */
> -- 
> 2.37.3
> 



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux