Re: [PATCH v6 0/3] Implement IOCTL to get and/or the clear info about PTEs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05.12.22 16:29, Muhammad Usama Anjum wrote:
On 11/30/22 5:10 PM, David Hildenbrand wrote:
On 30.11.22 12:42, Muhammad Usama Anjum wrote:
On 11/21/22 8:55 PM, David Hildenbrand wrote:
On 21.11.22 16:00, Muhammad Usama Anjum wrote:
Hello,

Thank you for replying.

On 11/14/22 8:46 PM, David Hildenbrand wrote:
The soft-dirtiness is stored in the PTE. VMA is marked dirty to store
the
dirtiness for reused regions. Clearing the soft-dirty status of whole
process is straight forward. When we want to clear/monitor the
soft-dirtiness of a part of the virtual memory, there is a lot of
internal
noise. We don't want the non-dirty pages to become dirty because of how
the
soft-dirty feature has been working. Soft-dirty feature wasn't being
used
the way we want to use now. While monitoring a part of memory, it is not
acceptable to get non-dirty pages as dirty. Non-dirty pages become dirty
when the two VMAs are merged without considering if they both are
dirty or
not (34228d473efe). To monitor changes over the memory, sometimes
VMAs are
split to clear the soft-dirty bit in the VMA flags. But sometimes kernel
decide to merge them backup. It is so waste of resources.

Maybe you'd want a per-process option to not merge if the VM_SOFTDIRTY
property differs. But that might be just one alternative for handling
this
case.


To keep things consistent, the default behavior of the IOCTL is to
output
even the extra non-dirty pages as dirty from the kernel noise. A
optional
PAGEMAP_NO_REUSED_REGIONS flag is added for those use cases which aren't
tolerant of extra non-dirty pages. This flag can be considered as
something
which is by-passing the already present buggy implementation in the
kernel.
It is not buggy per say as the issue can be solved if we don't allow the
two VMA which have different soft-dirty bits to get merged. But we are
allowing that so that the total number of VMAs doesn't increase. This
was
acceptable at the time, but now with the use case of monitoring a
part of
memory for soft-dirty doesn't want this merging. So either we need to
revert 34228d473efe and PAGEMAP_NO_REUSED_REGIONS flag will not be
needed
or we should allow PAGEMAP_NO_REUSED_REGIONS or similar mechanism to
ignore
the extra dirty pages which aren't dirty in reality.

When PAGEMAP_NO_REUSED_REGIONS flag is used, only the PTEs are
checked to
find if the pages are dirty. So re-used regions cannot be detected. This
has the only side-effect of not checking the VMAs. So this is
limitation of
using this flag which should be acceptable in the current state of code.
This limitation is okay for the users as they can clear the
soft-dirty bit
of the VMA before starting to monitor a range of memory for
soft-dirtiness.


Please separate that part out from the other changes; I am still not
convinced that we want this and what the semantical implications are.

Let's take a look at an example: can_change_pte_writable()

        /* Do we need write faults for softdirty tracking? */
        if (vma_soft_dirty_enabled(vma) && !pte_soft_dirty(pte))
            return false;

We care about PTE softdirty tracking, if it is enabled for the VMA.
Tracking is enabled if: vma_soft_dirty_enabled()

        /*
         * Soft-dirty is kind of special: its tracking is enabled when
         * the vma flags not set.
         */
        return !(vma->vm_flags & VM_SOFTDIRTY);

Consequently, if VM_SOFTDIRTY is set, we are not considering the
soft_dirty
PTE bits accordingly.
Sorry, I'm unable to completely grasp the meaning of the example. We
have
followed clear_refs_write() to write the soft-dirty bit clearing code in
the current patch. Dirtiness of the VMA and the PTE may be set
independently. Newer allocated memory has dirty bit set in the VMA. When
something is written the memory, the soft dirty bit is set in the
PTEs as
well regardless if the soft dirty bit is set in the VMA or not.


Let me try to find a simple explanation:

After clearing a SOFTDIRTY PTE flag inside an area with VM_SOFTDIRTY set,
there are ways that PTE could get written to and it could become dirty,
without the PTE becoming softdirty.

Essentially, inside a VMA with VM_SOFTDIRTY set, the PTE softdirty values
might be stale: there might be entries that are softdirty even though the
PTE is *not* marked softdirty.
Can someone please share the example to reproduce this? In all of my
testing, even if I ignore VM_SOFTDIRTY and only base my decision of
soft-dirtiness on individual pages, it always passes.

Quick reproducer (the first and easiest one that triggered :) )
attached.

With no kernel changes, it works as expected.

# ./softdirty_mprotect


With the following kernel change to simulate what you propose it fails:

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index d22687d2e81e..f2c682bf7f64 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -1457,8 +1457,8 @@ static pagemap_entry_t pte_to_pagemap_entry(struct
pagemapread *pm,
                  flags |= PM_FILE;
          if (page && !migration && page_mapcount(page) == 1)
                  flags |= PM_MMAP_EXCLUSIVE;
-       if (vma->vm_flags & VM_SOFTDIRTY)
-               flags |= PM_SOFT_DIRTY;
+       //if (vma->vm_flags & VM_SOFTDIRTY)
+       //      flags |= PM_SOFT_DIRTY;
            return make_pme(frame, flags);
   }


# ./softdirty_mprotect
Page #1 should be softdirty

Thank you so much for sharing the issue and reproducer.

After remapping the second part of the memory and m-protecting +
m-unprotecting the whole memory, the PTE of the first half of the memory
doesn't get marked as soft dirty even after writing multiple times to it.
Even if soft-dirtiness is cleared on the whole process, the PTE of the
first half memory doesn't get dirty. This seems like more of a bug in
mprotect. The mprotect should not mess up with the soft-dirty flag in the
PTEs.

I'm debugging this. I hope to find the issue soon. Soft-dirty tracking in
PTEs should be working correctly irrespective of the VM_SOFTDIRTY is set or
not on the VMA.

No, it's not a bug and these are not the VM_SOFTDIRTY semantics -- just
because you think they should be like this. As people explained,
VM_SOFTDIRTY implies *until now* that any PTE is consideres softdirty. And
there are other scenarios that can similarly trigger something like that,
besides mprotect().

Sorry if I sound annoyed, but please

1) factor out that from your patch set for now
2) find a way to handle this cleanly, for example, not merging VMAs that
    differ in VM_SOFTDIRTY


I'm extremely sorry for the annoyance. I absolutely understand your point.

No need to be sorry :)

The problem is that the half of this IOCTL wouldn't be useful without
solving the extra soft-dirty pages issue. We don't want to upstream
something which we wouldn't be using until 2 is solved. This is why we are
trying to solve the point 2 before upstreaming the 1. I'm working on ideas
on how this can be resolved or redesigned entirely. Maybe Cyril will share
the ideas soon once he has some time. He was involved in the soft-dirty
feature development.

Got it, thanks for the info on usability without this feature. Let me make my point clearer: exposing VM_SOFTDIRTY details to user space and providing different kinds of "soft dirty" really is sub-optimal from an ABI POV.

It would be really preferred if we could just find a way to improve the soft-dirty implementation in a way such that no such ABI hacks are required and that the existing interface will provide the semantics you want. For example, if we could rework the VMA merging case that would be really preferable.

I understand that we might want more fine-grained soft-dirty clearing IOCTLs. My primary concern is regarding the VM_SOFTDIRTY special-casing just when observing whether a PTE is softdirty.

--
Thanks,

David / dhildenb




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux