Re: [PATCH 2/4] fs: define a firmware security filesystem named fwsecurityfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/17/22 16:27, Greg Kroah-Hartman wrote:
On Mon, Nov 14, 2022 at 06:03:43PM -0500, Nayna wrote:
On 11/10/22 04:58, Greg Kroah-Hartman wrote:
On Wed, Nov 09, 2022 at 03:10:37PM -0500, Nayna wrote:
On 11/9/22 08:46, Greg Kroah-Hartman wrote:
On Sun, Nov 06, 2022 at 04:07:42PM -0500, Nayna Jain wrote:
securityfs is meant for Linux security subsystems to expose policies/logs
or any other information. However, there are various firmware security
features which expose their variables for user management via the kernel.
There is currently no single place to expose these variables. Different
platforms use sysfs/platform specific filesystem(efivarfs)/securityfs
interface as they find it appropriate. Thus, there is a gap in kernel
interfaces to expose variables for security features.

Define a firmware security filesystem (fwsecurityfs) to be used by
security features enabled by the firmware. These variables are platform
specific. This filesystem provides platforms a way to implement their
    own underlying semantics by defining own inode and file operations.

Similar to securityfs, the firmware security filesystem is recommended
to be exposed on a well known mount point /sys/firmware/security.
Platforms can define their own directory or file structure under this path.

Example:

# mount -t fwsecurityfs fwsecurityfs /sys/firmware/security
Why not juset use securityfs in /sys/security/firmware/ instead?  Then
you don't have to create a new filesystem and convince userspace to
mount it in a specific location?
  From man 5 sysfs page:

/sys/firmware: This subdirectory contains interfaces for viewing and
manipulating firmware-specific objects and attributes.

/sys/kernel: This subdirectory contains various files and subdirectories
that provide information about the running kernel.

The security variables which are being exposed via fwsecurityfs are managed
by firmware, stored in firmware managed space and also often consumed by
firmware for enabling various security features.
Ok, then just use the normal sysfs interface for /sys/firmware, why do
you need a whole new filesystem type?

  From git commit b67dbf9d4c1987c370fd18fdc4cf9d8aaea604c2, the purpose of
securityfs(/sys/kernel/security) is to provide a common place for all kernel
LSMs. The idea of
fwsecurityfs(/sys/firmware/security) is to similarly provide a common place
for all firmware security objects.

/sys/firmware already exists. The patch now defines a new /security
directory in it for firmware security features. Using /sys/kernel/security
would mean scattering firmware objects in multiple places and confusing the
purpose of /sys/kernel and /sys/firmware.
sysfs is confusing already, no problem with making it more confusing :)

Just document where you add things and all should be fine.

Even though fwsecurityfs code is based on securityfs, since the two
filesystems expose different types of objects and have different
requirements, there are distinctions:

1. fwsecurityfs lets users create files in userspace, securityfs only allows
kernel subsystems to create files.
Wait, why would a user ever create a file in this filesystem?  If you
need that, why not use configfs?  That's what that is for, right?
The purpose of fwsecurityfs is not to expose configuration items but rather
security objects used for firmware security features. I think these are more
comparable to EFI variables, which are exposed via an EFI-specific
filesystem, efivarfs, rather than configfs.

2. firmware and kernel objects may have different requirements. For example,
consideration of namespacing. As per my understanding, namespacing is
applied to kernel resources and not firmware resources. That's why it makes
sense to add support for namespacing in securityfs, but we concluded that
fwsecurityfs currently doesn't need it. Another but similar example of it
is: TPM space, which is exposed from hardware. For containers, the TPM would
be made as virtual/software TPM. Similarly for firmware space for
containers, it would have to be something virtualized/software version of
it.
I do not understand, sorry.  What does namespaces have to do with this?
sysfs can already handle namespaces just fine, why not use that?
Firmware objects are not namespaced. I mentioned it here as an example of
the difference between firmware and kernel objects. It is also in response
to the feedback from James Bottomley in RFC v2 [https://lore.kernel.org/linuxppc-dev/41ca51e8db9907d9060cc38adb59a66dcae4c59b.camel@xxxxxxxxxxxxxxxxxxxxx/].
I do not understand, sorry.  Do you want to use a namespace for these or
not?  The code does not seem to be using namespaces.  You can use sysfs
with, or without, a namespace so I don't understand the issue here.

With your code, there is no namespace.

You are correct. There's no namespace for these.



3. firmware objects are persistent and read at boot time by interaction with
firmware, unlike kernel objects which are not persistent.
That doesn't matter, sysfs exports what the hardware provides, and that
might persist over boot.

So I don't see why a new filesystem is needed.

You didn't explain why sysfs, or securitfs (except for the location in
the tree) does not work at all for your needs.  The location really
doesn't matter all that much as you are creating a brand new location
anyway so we can just declare "this is where this stuff goes" and be ok.
For rest of the questions, here is the summarized response.

Based on mailing list previous discussions [1][2][3] and considering various
firmware security use cases, our fwsecurityfs proposal seemed to be a
reasonable and acceptable approach based on the feedback [4].

[1] https://lore.kernel.org/linuxppc-dev/YeuyUVVdFADCuDr4@xxxxxxxxx/#t
[2] https://lore.kernel.org/linuxppc-dev/Yfk6gucNmJuR%2Fegi@xxxxxxxxx/
[3] https://lore.kernel.org/all/Yfo%2F5gYgb9Sv24YB@xxxxxxxxx/t/#m40250fdb3fddaafe502ab06e329e63381b00582d
[4] https://lore.kernel.org/linuxppc-dev/YrQqPhi4+jHZ1WJc@xxxxxxxxx/

RFC v1 was using sysfs. After considering feedback[1][2][3], the following
are design considerations for unification via fwsecurityfs:

1. Unify the location: Defining a security directory under /sys/firmware
facilitates exposing objects related to firmware security features in a
single place. Different platforms can create their respective directory
structures within /sys/firmware/security.
So just pick one place in sysfs for this to always go into.

I agree that the objects should go directly under a /sys/firmware/security mountpoint.


Your patch series does not document anything here, there are no
Documentation/ABI/ entries that define the files being created, so that
it's really hard to be able to review the code to determine if it is
doing what you are wanting it to do.

You can't document apis with just a changelog text alone, sorry.


Agreed, I'll include documentation in the next version.



2. Unify the code:  To support unification, having the fwsecurityfs
filesystem API allows different platforms to define the inode and file
operations they need. fwsecurityfs provides a common API that can be used by
each platform-specific implementation to support its particular requirements
and interaction with firmware. Initializing platform-specific functions is
the purpose of the fwsecurityfs_arch_init() function that is called on
mount. Patch 3/4 implements fwsecurityfs_arch_init() for powerpc.
But you only are doing this for one platform, that's not any
unification.  APIs don't really work unless they can handle 3 users, as
then you really understand if they work or not.

Right now you wrote this code and it only has one user, that's a
platform-specific-filesystem-only so far.


Yes I agree, having more exploiters would certainly help to confirm and improve the interface.

If you prefer, we could start with an arch specific filesystem. It could be made generic in the future if required.



Similar to the common place securityfs provides for LSMs to interact with
kernel security objects, fwsecurityfs would provide a common place for all
firmware security objects, which interact with the firmware rather than the
kernel. Although at the API level, the two filesystem look similar, the
requirements for firmware and kernel objects are different. Therefore,
reusing securityfs wasn't a good fit for the firmware use case and we are
proposing a similar but different filesystem -  fwsecurityfs - focused for
firmware security.
What other platforms will use this?  Who is going to move their code
over to it?


I had received constructive feedback on my RFC v2 but thus far, no other platforms have indicated they have a need for it.


And again, how are you going to get all Linux distros to now mount your
new filesystem?
It would be analogous to the way securityfs is mounted.
That did not answer the question.  The question is how are you going to
get the distros to mount your new filesystem specifically?  How will
they know that they need to modify their init scripts to do this?  Who
is going to do that?  For what distro?  On what timeline?


I'll add a documentation patch for fwsecurityfs.  And I'll propose a systemd patch to extend mount_table[] in src/shared/mount-setup.c to include fwsecurityfs.

For RHEL 9.3 and SLES 15 SP6, we have feature requests opened to request adoption of the PKS userspace interface. We will communicate the mount point and init script changes via those feature requests.

Other distros can adapt the upstream implementation to fit their requirements, such as mounting via simple init scripts without systemd for more constrained systems, using the systemd as an example.

Please let me know if you have other concerns with respect to mounting the filesystem.


Oh, and it looks like this series doesn't pass the kernel testing bot at
all, so I'll not review the code until that's all fixed up at the very
least.


I knew it failed, but I wanted to get your feedback on the approach before posting a new version. I'll fix it.

Thank you for your review and feedback. I hope I have addressed your concerns.

Thanks & Regards,

      - Nayna

thanks,

greg k-h



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux