Re: [PATCH v6 8/9] vfs: update times after copying data in __generic_file_write_iter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 04 Oct 2022, Amir Goldstein wrote:
> On Mon, Oct 3, 2022 at 4:01 PM Jeff Layton <jlayton@xxxxxxxxxx> wrote:
> >
> > On Sun, 2022-10-02 at 10:08 +0300, Amir Goldstein wrote:
> > > On Fri, Sep 30, 2022 at 2:30 PM Jeff Layton <jlayton@xxxxxxxxxx> wrote:
> > > >
> > > > The c/mtime and i_version currently get updated before the data is
> > > > copied (or a DIO write is issued), which is problematic for NFS.
> > > >
> > > > READ+GETATTR can race with a write (even a local one) in such a way as
> > > > to make the client associate the state of the file with the wrong change
> > > > attribute. That association can persist indefinitely if the file sees no
> > > > further changes.
> > > >
> > > > Move the setting of times to the bottom of the function in
> > > > __generic_file_write_iter and only update it if something was
> > > > successfully written.
> > > >
> > >
> > > This solution is wrong for several reasons:
> > >
> > > 1. There is still file_update_time() in ->page_mkwrite() so you haven't
> > >     solved the problem completely
> >
> > Right. I don't think there is a way to solve the problem vs. mmap.
> > Userland can write to a writeable mmap'ed page at any time and we'd
> > never know. We have to specifically carve out mmap as an exception here.
> > I'll plan to add something to the manpage patch for this.
> >
> > > 2. The other side of the coin is that post crash state is more likely to end
> > >     up data changes without mtime/ctime change
> > >
> >
> > Is this really something filesystems rely on? I suppose the danger is
> > that some cached data gets written to disk before the write returns and
> > the inode on disk never gets updated.
> >
> > But...isn't that a danger now? Some of the cached data could get written
> > out and the updated inode just never makes it to disk before a crash
> > (AFAIU). I'm not sure that this increases our exposure to that problem.
> >
> >
> 
> You are correct that that danger exists, but it only exists for overwriting
> to allocated blocks.
> 
> For writing to new blocks, mtime change is recorded in transaction
> before the block mapping is recorded in transaction so there is no
> danger in this case (before your patch).
> 
> Also, observing size change without observing mtime change
> after crash seems like a very bad outcome that may be possible
> after your change.
> 
> These are just a few cases that I could think of, they may be filesystem
> dependent, but my gut feeling is that if you remove the time update before
> the operation, that has been like that forever, a lot of s#!t is going to float
> for various filesystems and applications.
> 
> And it is not one of those things that are discovered  during rc or even
> stable kernel testing - they are discovered much later when users start to
> realize their applications got bogged up after crash, so it feels like to me
> like playing with fire.
> 
> > > If I read the problem description correctly, then a solution that invalidates
> > > the NFS cache before AND after the write would be acceptable. Right?
> > > Would an extra i_version bump after the write solve the race?
> > >
> >
> > I based this patch on Neil's assertion that updating the time before an
> > operation was pointless if we were going to do it afterward. The NFS
> > client only really cares about seeing it change after a write.
> >
> 
> Pointless to NFS client maybe.
> Whether or not this is not changing user behavior for other applications
> is up to you to prove and I doubt that you can prove it because I doubt
> that it is true.
> 
> > Doing both would be fine from a correctness standpoint, and in most
> > cases, the second would be a no-op anyway since a query would have to
> > race in between the two for that to happen.
> >
> > FWIW, I think we should update the m/ctime and version at the same time.
> > If the version changes, then there is always the potential that a timer
> > tick has occurred. So, that would translate to a second call to
> > file_update_time in here.
> >
> > The downside of bumping the times/version both before and after is that
> > these are hot codepaths, and we'd be adding extra operations there. Even
> > in the case where nothing has changed, we'd have to call
> > inode_needs_update_time a second time for every write. Is that worth the
> > cost?
> 
> Is there a practical cost for iversion bump AFTER write as I suggested?
> If you NEED m/ctime update AFTER write and iversion update is not enough
> then I did not understand from your commit message why that is.
> 
> Thanks,
> Amir.
> 

Maybe we should split i_version updates from ctime updates.

While it isn't true that ctime updates have happened before the write
"forever" it has been true since 2.3.43[1] which is close to forever.

For ctime there doesn't appear to be a strong specification of when the
change happens, so history provides a good case for leaving it before.
For i_version we want to provide clear and unambiguous semantics.
Performing 2 updates makes the specification muddy.

So I would prefer a single update for i_version, performed after the
change becomes visible.  If that means it has to be separate from ctime,
then so be it.

NeilBrown


[1]:  https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=636b38438001a00b25f23e38747a91cb8428af29




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux