In a recent discussion[1] it was reported that the binfmt_flat library support was only ever used on m68k and even on m68k has not been used in a very long time. The structure of binfmt_flat is different from all of the other binfmt implementations becasue of this shared library support and it made life and code review more effort when I refactored the code in fs/exec.c. Since in practice the code is dead remove the binfmt_flat shared libarary support and make maintenance of the code easier. [1] https://lkml.kernel.org/r/81788b56-5b15-7308-38c7-c7f2502c4e15@xxxxxxxxxxxxxx Signed-off-by: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx> --- Can the binfmt_flat folks please verify that the shared library support really isn't used? Was binfmt_flat being enabled on arm and sh the mistake it looks like? arch/arm/configs/lpc18xx_defconfig | 1 - arch/arm/configs/mps2_defconfig | 1 - arch/arm/configs/stm32_defconfig | 1 - arch/arm/configs/vf610m4_defconfig | 1 - arch/sh/configs/rsk7201_defconfig | 1 - arch/sh/configs/rsk7203_defconfig | 1 - arch/sh/configs/se7206_defconfig | 1 - fs/Kconfig.binfmt | 6 - fs/binfmt_flat.c | 190 ++++++----------------------- 9 files changed, 40 insertions(+), 163 deletions(-) diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index be882ea0eee4..688c9849eec8 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -30,7 +30,6 @@ CONFIG_ARM_APPENDED_DTB=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_COREDUMP is not set CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig index 89f4a6ff30bd..c1e98e33a348 100644 --- a/arch/arm/configs/mps2_defconfig +++ b/arch/arm/configs/mps2_defconfig @@ -23,7 +23,6 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_BINFMT_FLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_COREDUMP is not set # CONFIG_SUSPEND is not set CONFIG_NET=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 551db328009d..71d6bfcf4551 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -28,7 +28,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x08008000 CONFIG_BINFMT_FLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_COREDUMP is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig index a89f035c3b01..70fdbfd83484 100644 --- a/arch/arm/configs/vf610m4_defconfig +++ b/arch/arm/configs/vf610m4_defconfig @@ -18,7 +18,6 @@ CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x0f000080 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_SUSPEND is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_STANDALONE is not set diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig index e41526120be1..619c18699459 100644 --- a/arch/sh/configs/rsk7201_defconfig +++ b/arch/sh/configs/rsk7201_defconfig @@ -25,7 +25,6 @@ CONFIG_CMDLINE_OVERWRITE=y CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_BINFMT_SHARED_FLAT=y CONFIG_PM=y CONFIG_CPU_IDLE=y # CONFIG_STANDALONE is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index 6af08fa1ddf8..5a54e2b883f0 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -30,7 +30,6 @@ CONFIG_CMDLINE_OVERWRITE=y CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_BINFMT_SHARED_FLAT=y CONFIG_PM=y CONFIG_CPU_IDLE=y CONFIG_NET=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 601d062250d1..122216123e63 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -40,7 +40,6 @@ CONFIG_CMDLINE_OVERWRITE=y CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial" CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_BINFMT_SHARED_FLAT=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 21c6332fa785..32dff7ba3dda 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -142,12 +142,6 @@ config BINFMT_ZFLAT help Support FLAT format compressed binaries -config BINFMT_SHARED_FLAT - bool "Enable shared FLAT support" - depends on BINFMT_FLAT - help - Support FLAT shared libraries - config HAVE_AOUT def_bool n diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index 0ad2c7bbaddd..82e4412a9665 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -68,11 +68,7 @@ #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */ #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */ -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else -#define MAX_SHARED_LIBS (1) -#endif +#define MAX_SHARED_LIBS (1) #ifdef CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET #define DATA_START_OFFSET_WORDS (0) @@ -92,10 +88,6 @@ struct lib_info { } lib_list[MAX_SHARED_LIBS]; }; -#ifdef CONFIG_BINFMT_SHARED_FLAT -static int load_flat_shared_library(int id, struct lib_info *p); -#endif - static int load_flat_binary(struct linux_binprm *); static struct linux_binfmt flat_format = { @@ -307,51 +299,18 @@ static int decompress_exec(struct linux_binprm *bprm, loff_t fpos, char *dst, /****************************************************************************/ static unsigned long -calc_reloc(unsigned long r, struct lib_info *p, int curid, int internalp) +calc_reloc(unsigned long r, struct lib_info *p) { unsigned long addr; - int id; unsigned long start_brk; unsigned long start_data; unsigned long text_len; unsigned long start_code; -#ifdef CONFIG_BINFMT_SHARED_FLAT - if (r == 0) - id = curid; /* Relocs of 0 are always self referring */ - else { - id = (r >> 24) & 0xff; /* Find ID for this reloc */ - r &= 0x00ffffff; /* Trim ID off here */ - } - if (id >= MAX_SHARED_LIBS) { - pr_err("reference 0x%lx to shared library %d", r, id); - goto failed; - } - if (curid != id) { - if (internalp) { - pr_err("reloc address 0x%lx not in same module " - "(%d != %d)", r, curid, id); - goto failed; - } else if (!p->lib_list[id].loaded && - load_flat_shared_library(id, p) < 0) { - pr_err("failed to load library %d", id); - goto failed; - } - /* Check versioning information (i.e. time stamps) */ - if (p->lib_list[id].build_date && p->lib_list[curid].build_date && - p->lib_list[curid].build_date < p->lib_list[id].build_date) { - pr_err("library %d is younger than %d", id, curid); - goto failed; - } - } -#else - id = 0; -#endif - - start_brk = p->lib_list[id].start_brk; - start_data = p->lib_list[id].start_data; - start_code = p->lib_list[id].start_code; - text_len = p->lib_list[id].text_len; + start_brk = p->lib_list[0].start_brk; + start_data = p->lib_list[0].start_data; + start_code = p->lib_list[0].start_code; + text_len = p->lib_list[0].text_len; if (r > start_brk - start_data + text_len) { pr_err("reloc outside program 0x%lx (0 - 0x%lx/0x%lx)", @@ -419,7 +378,7 @@ static void old_reloc(unsigned long rl) /****************************************************************************/ static int load_flat_file(struct linux_binprm *bprm, - struct lib_info *libinfo, int id, unsigned long *extra_stack) + struct lib_info *libinfo, unsigned long *extra_stack) { struct flat_hdr *hdr; unsigned long textpos, datapos, realdatastart; @@ -471,14 +430,6 @@ static int load_flat_file(struct linux_binprm *bprm, goto err; } - /* Don't allow old format executables to use shared libraries */ - if (rev == OLD_FLAT_VERSION && id != 0) { - pr_err("shared libraries are not available before rev 0x%lx\n", - FLAT_VERSION); - ret = -ENOEXEC; - goto err; - } - /* * fix up the flags for the older format, there were all kinds * of endian hacks, this only works for the simple cases @@ -529,15 +480,13 @@ static int load_flat_file(struct linux_binprm *bprm, } /* Flush all traces of the currently running executable */ - if (id == 0) { - ret = begin_new_exec(bprm); - if (ret) - goto err; + ret = begin_new_exec(bprm); + if (ret) + goto err; - /* OK, This is the point of no return */ - set_personality(PER_LINUX_32BIT); - setup_new_exec(bprm); - } + /* OK, This is the point of no return */ + set_personality(PER_LINUX_32BIT); + setup_new_exec(bprm); /* * calculate the extra space we need to map in @@ -717,42 +666,40 @@ static int load_flat_file(struct linux_binprm *bprm, text_len -= sizeof(struct flat_hdr); /* the real code len */ /* The main program needs a little extra setup in the task structure */ - if (id == 0) { - current->mm->start_code = start_code; - current->mm->end_code = end_code; - current->mm->start_data = datapos; - current->mm->end_data = datapos + data_len; - /* - * set up the brk stuff, uses any slack left in data/bss/stack - * allocation. We put the brk after the bss (between the bss - * and stack) like other platforms. - * Userspace code relies on the stack pointer starting out at - * an address right at the end of a page. - */ - current->mm->start_brk = datapos + data_len + bss_len; - current->mm->brk = (current->mm->start_brk + 3) & ~3; + current->mm->start_code = start_code; + current->mm->end_code = end_code; + current->mm->start_data = datapos; + current->mm->end_data = datapos + data_len; + /* + * set up the brk stuff, uses any slack left in data/bss/stack + * allocation. We put the brk after the bss (between the bss + * and stack) like other platforms. + * Userspace code relies on the stack pointer starting out at + * an address right at the end of a page. + */ + current->mm->start_brk = datapos + data_len + bss_len; + current->mm->brk = (current->mm->start_brk + 3) & ~3; #ifndef CONFIG_MMU - current->mm->context.end_brk = memp + memp_size - stack_len; + current->mm->context.end_brk = memp + memp_size - stack_len; #endif - } if (flags & FLAT_FLAG_KTRACE) { pr_info("Mapping is %lx, Entry point is %x, data_start is %x\n", textpos, 0x00ffffff&ntohl(hdr->entry), ntohl(hdr->data_start)); pr_info("%s %s: TEXT=%lx-%lx DATA=%lx-%lx BSS=%lx-%lx\n", - id ? "Lib" : "Load", bprm->filename, + "Load", bprm->filename, start_code, end_code, datapos, datapos + data_len, datapos + data_len, (datapos + data_len + bss_len + 3) & ~3); } /* Store the current module values into the global library structure */ - libinfo->lib_list[id].start_code = start_code; - libinfo->lib_list[id].start_data = datapos; - libinfo->lib_list[id].start_brk = datapos + data_len + bss_len; - libinfo->lib_list[id].text_len = text_len; - libinfo->lib_list[id].loaded = 1; - libinfo->lib_list[id].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos; - libinfo->lib_list[id].build_date = ntohl(hdr->build_date); + libinfo->lib_list[0].start_code = start_code; + libinfo->lib_list[0].start_data = datapos; + libinfo->lib_list[0].start_brk = datapos + data_len + bss_len; + libinfo->lib_list[0].text_len = text_len; + libinfo->lib_list[0].loaded = 1; + libinfo->lib_list[0].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos; + libinfo->lib_list[0].build_date = ntohl(hdr->build_date); /* * We just load the allocations into some temporary memory to @@ -774,7 +721,7 @@ static int load_flat_file(struct linux_binprm *bprm, if (rp_val == 0xffffffff) break; if (rp_val) { - addr = calc_reloc(rp_val, libinfo, id, 0); + addr = calc_reloc(rp_val, libinfo); if (addr == RELOC_FAILED) { ret = -ENOEXEC; goto err; @@ -810,7 +757,7 @@ static int load_flat_file(struct linux_binprm *bprm, return -EFAULT; relval = ntohl(tmp); addr = flat_get_relocate_addr(relval); - rp = (u32 __user *)calc_reloc(addr, libinfo, id, 1); + rp = (u32 __user *)calc_reloc(addr, libinfo); if (rp == (u32 __user *)RELOC_FAILED) { ret = -ENOEXEC; goto err; @@ -833,7 +780,7 @@ static int load_flat_file(struct linux_binprm *bprm, */ addr = ntohl((__force __be32)addr); } - addr = calc_reloc(addr, libinfo, id, 0); + addr = calc_reloc(addr, libinfo); if (addr == RELOC_FAILED) { ret = -ENOEXEC; goto err; @@ -861,7 +808,7 @@ static int load_flat_file(struct linux_binprm *bprm, /* zero the BSS, BRK and stack areas */ if (clear_user((void __user *)(datapos + data_len), bss_len + (memp + memp_size - stack_len - /* end brk */ - libinfo->lib_list[id].start_brk) + /* start brk */ + libinfo->lib_list[0].start_brk) + /* start brk */ stack_len)) return -EFAULT; @@ -871,49 +818,6 @@ static int load_flat_file(struct linux_binprm *bprm, } -/****************************************************************************/ -#ifdef CONFIG_BINFMT_SHARED_FLAT - -/* - * Load a shared library into memory. The library gets its own data - * segment (including bss) but not argv/argc/environ. - */ - -static int load_flat_shared_library(int id, struct lib_info *libs) -{ - /* - * This is a fake bprm struct; only the members "buf", "file" and - * "filename" are actually used. - */ - struct linux_binprm bprm; - int res; - char buf[16]; - loff_t pos = 0; - - memset(&bprm, 0, sizeof(bprm)); - - /* Create the file name */ - sprintf(buf, "/lib/lib%d.so", id); - - /* Open the file up */ - bprm.filename = buf; - bprm.file = open_exec(bprm.filename); - res = PTR_ERR(bprm.file); - if (IS_ERR(bprm.file)) - return res; - - res = kernel_read(bprm.file, bprm.buf, BINPRM_BUF_SIZE, &pos); - - if (res >= 0) - res = load_flat_file(&bprm, libs, id, NULL); - - allow_write_access(bprm.file); - fput(bprm.file); - - return res; -} - -#endif /* CONFIG_BINFMT_SHARED_FLAT */ /****************************************************************************/ /* @@ -946,7 +850,7 @@ static int load_flat_binary(struct linux_binprm *bprm) stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */ stack_len = ALIGN(stack_len, FLAT_STACK_ALIGN); - res = load_flat_file(bprm, &libinfo, 0, &stack_len); + res = load_flat_file(bprm, &libinfo, &stack_len); if (res < 0) return res; @@ -991,20 +895,6 @@ static int load_flat_binary(struct linux_binprm *bprm) */ start_addr = libinfo.lib_list[0].entry; -#ifdef CONFIG_BINFMT_SHARED_FLAT - for (i = MAX_SHARED_LIBS-1; i > 0; i--) { - if (libinfo.lib_list[i].loaded) { - /* Push previos first to call address */ - unsigned long __user *sp; - current->mm->start_stack -= sizeof(unsigned long); - sp = (unsigned long __user *)current->mm->start_stack; - if (put_user(start_addr, sp)) - return -EFAULT; - start_addr = libinfo.lib_list[i].entry; - } - } -#endif - #ifdef FLAT_PLAT_INIT FLAT_PLAT_INIT(regs); #endif -- 2.35.3
