On Mon, Jun 28, 2021 at 9:02 PM Stefan Hajnoczi <stefanha@xxxxxxxxxx> wrote:
>
> On Tue, Jun 15, 2021 at 10:13:30PM +0800, Xie Yongji wrote:
> > diff --git a/include/uapi/linux/vduse.h b/include/uapi/linux/vduse.h
> > new file mode 100644
> > index 000000000000..f21b2e51b5c8
> > --- /dev/null
> > +++ b/include/uapi/linux/vduse.h
> > @@ -0,0 +1,143 @@
> > +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> > +#ifndef _UAPI_VDUSE_H_
> > +#define _UAPI_VDUSE_H_
> > +
> > +#include <linux/types.h>
> > +
> > +#define VDUSE_API_VERSION 0
> > +
> > +#define VDUSE_NAME_MAX 256
> > +
> > +/* the control messages definition for read/write */
> > +
> > +enum vduse_req_type {
> > + /* Get the state for virtqueue from userspace */
> > + VDUSE_GET_VQ_STATE,
> > + /* Notify userspace to start the dataplane, no reply */
> > + VDUSE_START_DATAPLANE,
> > + /* Notify userspace to stop the dataplane, no reply */
> > + VDUSE_STOP_DATAPLANE,
> > + /* Notify userspace to update the memory mapping in device IOTLB */
> > + VDUSE_UPDATE_IOTLB,
> > +};
> > +
> > +struct vduse_vq_state {
> > + __u32 index; /* virtqueue index */
> > + __u32 avail_idx; /* virtqueue state (last_avail_idx) */
> > +};
> > +
> > +struct vduse_iova_range {
> > + __u64 start; /* start of the IOVA range */
> > + __u64 last; /* end of the IOVA range */
>
> Please clarify whether this describes a closed range [start, last] or an
> open range [start, last).
>
OK.
> > +};
> > +
> > +struct vduse_dev_request {
> > + __u32 type; /* request type */
> > + __u32 request_id; /* request id */
> > +#define VDUSE_REQ_FLAGS_NO_REPLY (1 << 0) /* No need to reply */
> > + __u32 flags; /* request flags */
> > + __u32 reserved; /* for future use */
> > + union {
> > + struct vduse_vq_state vq_state; /* virtqueue state */
> > + struct vduse_iova_range iova; /* iova range for updating */
> > + __u32 padding[16]; /* padding */
> > + };
> > +};
> > +
> > +struct vduse_dev_response {
> > + __u32 request_id; /* corresponding request id */
> > +#define VDUSE_REQ_RESULT_OK 0x00
> > +#define VDUSE_REQ_RESULT_FAILED 0x01
> > + __u32 result; /* the result of request */
> > + __u32 reserved[2]; /* for future use */
> > + union {
> > + struct vduse_vq_state vq_state; /* virtqueue state */
> > + __u32 padding[16]; /* padding */
> > + };
> > +};
> > +
> > +/* ioctls */
> > +
> > +struct vduse_dev_config {
> > + char name[VDUSE_NAME_MAX]; /* vduse device name */
> > + __u32 vendor_id; /* virtio vendor id */
> > + __u32 device_id; /* virtio device id */
> > + __u64 features; /* device features */
> > + __u64 bounce_size; /* bounce buffer size for iommu */
> > + __u16 vq_size_max; /* the max size of virtqueue */
>
> The VIRTIO specification allows per-virtqueue sizes. A device can have
> two virtqueues, where the first one allows up to 1024 descriptors and
> the second one allows only 128 descriptors, for example.
>
Good point! But it looks like virtio-vdpa/virtio-pci doesn't support
that now. All virtqueues have the same maximum size.
> This constant seems to impose the constraint that all virtqueues have
> the same maximum size. Is this really necessary?
>
This will be used by vring_create_virtqueue(). We need to specify the
maximum queue size supported by the device.
> > + __u16 padding; /* padding */
> > + __u32 vq_num; /* the number of virtqueues */
> > + __u32 vq_align; /* the allocation alignment of virtqueue's metadata */
>
> I'm not sure what this is?
>
This will be used by vring_create_virtqueue() too.
> > + __u32 config_size; /* the size of the configuration space */
> > + __u32 reserved[15]; /* for future use */
> > + __u8 config[0]; /* the buffer of the configuration space */
> > +};
> > +
> > +struct vduse_iotlb_entry {
> > + __u64 offset; /* the mmap offset on fd */
> > + __u64 start; /* start of the IOVA range */
> > + __u64 last; /* last of the IOVA range */
>
> Same here, please specify whether this is an open range or a closed
> range.
>
Sure.
> > +#define VDUSE_ACCESS_RO 0x1
> > +#define VDUSE_ACCESS_WO 0x2
> > +#define VDUSE_ACCESS_RW 0x3
> > + __u8 perm; /* access permission of this range */
> > +};
> > +
> > +struct vduse_config_update {
> > + __u32 offset; /* offset from the beginning of configuration space */
> > + __u32 length; /* the length to write to configuration space */
> > + __u8 buffer[0]; /* buffer used to write from */
> > +};
> > +
> > +struct vduse_vq_info {
> > + __u32 index; /* virtqueue index */
> > + __u32 avail_idx; /* virtqueue state (last_avail_idx) */
> > + __u64 desc_addr; /* address of desc area */
> > + __u64 driver_addr; /* address of driver area */
> > + __u64 device_addr; /* address of device area */
> > + __u32 num; /* the size of virtqueue */
> > + __u8 ready; /* ready status of virtqueue */
> > +};
> > +
> > +struct vduse_vq_eventfd {
> > + __u32 index; /* virtqueue index */
> > +#define VDUSE_EVENTFD_DEASSIGN -1
> > + int fd; /* eventfd, -1 means de-assigning the eventfd */
> > +};
> > +
> > +#define VDUSE_BASE 0x81
> > +
> > +/* Get the version of VDUSE API. This is used for future extension */
> > +#define VDUSE_GET_API_VERSION _IOR(VDUSE_BASE, 0x00, __u64)
> > +
> > +/* Set the version of VDUSE API. */
> > +#define VDUSE_SET_API_VERSION _IOW(VDUSE_BASE, 0x01, __u64)
> > +
> > +/* Create a vduse device which is represented by a char device (/dev/vduse/<name>) */
> > +#define VDUSE_CREATE_DEV _IOW(VDUSE_BASE, 0x02, struct vduse_dev_config)
> > +
> > +/* Destroy a vduse device. Make sure there are no references to the char device */
> > +#define VDUSE_DESTROY_DEV _IOW(VDUSE_BASE, 0x03, char[VDUSE_NAME_MAX])
> > +
> > +/*
> > + * Get a file descriptor for the first overlapped iova region,
> > + * -EINVAL means the iova region doesn't exist.
> > + */
> > +#define VDUSE_IOTLB_GET_FD _IOWR(VDUSE_BASE, 0x04, struct vduse_iotlb_entry)
> > +
> > +/* Get the negotiated features */
> > +#define VDUSE_DEV_GET_FEATURES _IOR(VDUSE_BASE, 0x05, __u64)
> > +
> > +/* Update the configuration space */
> > +#define VDUSE_DEV_UPDATE_CONFIG _IOW(VDUSE_BASE, 0x06, struct vduse_config_update)
> > +
> > +/* Get the specified virtqueue's information */
> > +#define VDUSE_VQ_GET_INFO _IOWR(VDUSE_BASE, 0x07, struct vduse_vq_info)
> > +
> > +/* Setup an eventfd to receive kick for virtqueue */
> > +#define VDUSE_VQ_SETUP_KICKFD _IOW(VDUSE_BASE, 0x08, struct vduse_vq_eventfd)
> > +
> > +/* Inject an interrupt for specific virtqueue */
> > +#define VDUSE_VQ_INJECT_IRQ _IOW(VDUSE_BASE, 0x09, __u32)
>
> There is not enough documentation to use this header file. For example,
> which ioctls are used with /dev/vduse and which are used with
> /dev/vduse/<name>?
>
> Please document that ioctl API fully. It will not only help userspace
> developers but also define what is part of the interface and what is an
> implementation detail that can change in the future.
OK, I will try to add more details.
Thanks,
Yongji
