[PATCH 3/4] generic/{455,457,482}: make dmlogwrites tests work on bcachefs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



bcachefs has log structured btree nodes, in addition to a regular
journal, which means that unless we replay to markers in the log in the
same order that they happened and are careful to avoid writing in
between replaying to different events - we need to wipe and start fresh
each time.

Signed-off-by: Kent Overstreet <kent.overstreet@xxxxxxxxx>
---
 tests/generic/455 | 14 ++++++++++++++
 tests/generic/457 | 14 ++++++++++++++
 tests/generic/482 | 27 ++++++++++++++++++++-------
 3 files changed, 48 insertions(+), 7 deletions(-)

diff --git a/tests/generic/455 b/tests/generic/455
index 5b4b242e74..6dc46c3c72 100755
--- a/tests/generic/455
+++ b/tests/generic/455
@@ -35,6 +35,17 @@ _require_dm_target thin-pool
 
 rm -f $seqres.full
 
+_reset_dmthin()
+{
+    # With bcachefs, we need to wipe and start fresh every time we replay to a
+    # different point in time - if we see metadata from a future point in time,
+    # or an unrelated mount, bcachefs will get confused:
+    if [ "$FSTYP" = "bcachefs" ]; then
+	_dmthin_cleanup
+	_dmthin_init $devsize $devsize $csize $lowspace
+    fi
+}
+
 check_files()
 {
 	local name=$1
@@ -44,6 +55,7 @@ check_files()
 		local filename=$(basename $i)
 		local mark="${filename##*.}"
 		echo "checking $filename" >> $seqres.full
+		_reset_dmthin
 		_log_writes_replay_log $filename $DMTHIN_VOL_DEV
 		_dmthin_mount
 		local expected_md5=$(_md5_checksum $i)
@@ -101,6 +113,7 @@ _dmthin_check_fs
 
 # check pre umount
 echo "checking pre umount" >> $seqres.full
+_reset_dmthin
 _log_writes_replay_log last $DMTHIN_VOL_DEV
 _dmthin_mount
 _dmthin_check_fs
@@ -111,6 +124,7 @@ done
 
 # Check the end
 echo "checking post umount" >> $seqres.full
+_reset_dmthin
 _log_writes_replay_log end $DMTHIN_VOL_DEV
 _dmthin_mount
 for j in `seq 0 $((NUM_FILES-1))`; do
diff --git a/tests/generic/457 b/tests/generic/457
index ddbd90cf0c..f17d4e4430 100755
--- a/tests/generic/457
+++ b/tests/generic/457
@@ -37,6 +37,17 @@ _require_dm_target thin-pool
 
 rm -f $seqres.full
 
+_reset_dmthin()
+{
+    # With bcachefs, we need to wipe and start fresh every time we replay to a
+    # different point in time - if we see metadata from a future point in time,
+    # or an unrelated mount, bcachefs will get confused:
+    if [ "$FSTYP" = "bcachefs" ]; then
+	_dmthin_cleanup
+	_dmthin_init $devsize $devsize $csize $lowspace
+    fi
+}
+
 check_files()
 {
 	local name=$1
@@ -46,6 +57,7 @@ check_files()
 		local filename=$(basename $i)
 		local mark="${filename##*.}"
 		echo "checking $filename" >> $seqres.full
+		_reset_dmthin
 		_log_writes_replay_log $filename $DMTHIN_VOL_DEV
 		_dmthin_mount
 		local expected_md5=$(_md5_checksum $i)
@@ -105,6 +117,7 @@ _dmthin_check_fs
 
 # check pre umount
 echo "checking pre umount" >> $seqres.full
+_reset_dmthin
 _log_writes_replay_log last $DMTHIN_VOL_DEV
 _dmthin_mount
 _dmthin_check_fs
@@ -115,6 +128,7 @@ done
 
 # Check the end
 echo "checking post umount" >> $seqres.full
+_reset_dmthin
 _log_writes_replay_log end $DMTHIN_VOL_DEV
 _dmthin_mount
 for j in `seq 0 $((NUM_FILES-1))`; do
diff --git a/tests/generic/482 b/tests/generic/482
index 86941e8468..3cbe187f2e 100755
--- a/tests/generic/482
+++ b/tests/generic/482
@@ -77,16 +77,29 @@ prev=$(_log_writes_mark_to_entry_number mkfs)
 cur=$(_log_writes_find_next_fua $prev)
 [ -z "$cur" ] && _fail "failed to locate next FUA write"
 
+if [ "$FSTYP" = "bcachefs" ]; then
+    _dmthin_cleanup
+    _dmthin_init $devsize $devsize $csize $lowspace
+fi
+
 while [ ! -z "$cur" ]; do
 	_log_writes_replay_log_range $cur $DMTHIN_VOL_DEV >> $seqres.full
 
-	# Here we need extra mount to replay the log, mainly for journal based
-	# fs, as their fsck will report dirty log as error.
-	# We don't care to preserve any data on the replay dev, as we can replay
-	# back to the point we need, and in fact sometimes creating/deleting
-	# snapshots repeatedly can be slower than replaying the log.
-	_dmthin_mount
-	_dmthin_check_fs
+	if [ "$FSTYP" = "bcachefs" ]; then
+	    # bcachefs will get confused if fsck does writes to replay the log,
+	    # but then we replay writes from an earlier point in time on the
+	    # same fs - but  fsck in -n mode won't do any writes:
+	    _check_scratch_fs -n $DMTHIN_VOL_DEV
+	else
+	    # Here we need extra mount to replay the log, mainly for journal based
+	    # fs, as their fsck will report dirty log as error.
+	    # We don't care to preserve any data on the replay dev, as we can replay
+	    # back to the point we need, and in fact sometimes creating/deleting
+	    # snapshots repeatedly can be slower than replaying the log.
+
+	    _dmthin_mount
+	    _dmthin_check_fs
+	fi
 
 	prev=$cur
 	cur=$(_log_writes_find_next_fua $(($cur + 1)))
-- 
2.32.0.rc0





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux