VDUSE (vDPA Device in Userspace) is a framework to support
implementing software-emulated vDPA devices in userspace. This
document is intended to clarify the VDUSE design and usage.
Signed-off-by: Xie Yongji <xieyongji@xxxxxxxxxxxxx>
---
Documentation/userspace-api/index.rst | 1 +
Documentation/userspace-api/vduse.rst | 209 ++++++++++++++++++++++++++++++++++
2 files changed, 210 insertions(+)
create mode 100644 Documentation/userspace-api/vduse.rst
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index acd2cc2a538d..f63119130898 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -24,6 +24,7 @@ place where this information is gathered.
ioctl/index
iommu
media/index
+ vduse
.. only:: subproject and html
diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst
new file mode 100644
index 000000000000..744a9d3452c1
--- /dev/null
+++ b/Documentation/userspace-api/vduse.rst
@@ -0,0 +1,209 @@
+==================================
+VDUSE - "vDPA Device in Userspace"
+==================================
+
+vDPA (virtio data path acceleration) device is a device that uses a
+datapath which complies with the virtio specifications with vendor
+specific control path. vDPA devices can be both physically located on
+the hardware or emulated by software. VDUSE is a framework that makes it
+possible to implement software-emulated vDPA devices in userspace.
+
+How VDUSE works
+------------
+Each userspace vDPA device is created by the VDUSE_CREATE_DEV ioctl on
+the character device (/dev/vduse/control). Then a device file with the
+specified name (/dev/vduse/$NAME) will appear, which can be used to
+implement the userspace vDPA device's control path and data path.
+
+To implement control path, a message-based communication protocol and some
+types of control messages are introduced in the VDUSE framework:
+
+- VDUSE_SET_VQ_ADDR: Set the vring address of virtqueue.
+
+- VDUSE_SET_VQ_NUM: Set the size of virtqueue
+
+- VDUSE_SET_VQ_READY: Set ready status of virtqueue
+
+- VDUSE_GET_VQ_READY: Get ready status of virtqueue
+
+- VDUSE_SET_VQ_STATE: Set the state for virtqueue
+
+- VDUSE_GET_VQ_STATE: Get the state for virtqueue
+
+- VDUSE_SET_FEATURES: Set virtio features supported by the driver
+
+- VDUSE_GET_FEATURES: Get virtio features supported by the device
+
+- VDUSE_SET_STATUS: Set the device status
+
+- VDUSE_GET_STATUS: Get the device status
+
+- VDUSE_SET_CONFIG: Write to device specific configuration space
+
+- VDUSE_GET_CONFIG: Read from device specific configuration space
+
+- VDUSE_UPDATE_IOTLB: Notify userspace to update the memory mapping in device IOTLB
+
+Those control messages are mostly based on the vdpa_config_ops in
+include/linux/vdpa.h which defines a unified interface to control
+different types of vdpa device. Userspace needs to read()/write()
+on the VDUSE device file to receive/reply those control messages
+from/to VDUSE kernel module as follows:
+
+.. code-block:: c
+
+ static int vduse_message_handler(int dev_fd)
+ {
+ int len;
+ struct vduse_dev_request req;
+ struct vduse_dev_response resp;
+
+ len = read(dev_fd, &req, sizeof(req));
+ if (len != sizeof(req))
+ return -1;
+
+ resp.request_id = req.request_id;
+
+ switch (req.type) {
+
+ /* handle different types of message */
+
+ }
+
+ len = write(dev_fd, &resp, sizeof(resp));
+ if (len != sizeof(resp))
+ return -1;
+
+ return 0;
+ }
+
+In the data path, vDPA device's iova regions will be mapped into userspace
+with the help of VDUSE_IOTLB_GET_ENTRY ioctl on the VDUSE device file:
+
+- VDUSE_IOTLB_GET_ENTRY: get a mmap'able iova region containing the specified iova.
+ Userspace can access this iova region by passing corresponding size, offset, perm
+ and fd to mmap(). For example:
+
+.. code-block:: c
+
+ static int perm_to_prot(uint8_t perm)
+ {
+ int prot = 0;
+
+ switch (perm) {
+ case VDUSE_ACCESS_WO:
+ prot |= PROT_WRITE;
+ break;
+ case VDUSE_ACCESS_RO:
+ prot |= PROT_READ;
+ break;
+ case VDUSE_ACCESS_RW:
+ prot |= PROT_READ | PROT_WRITE;
+ break;
+ }
+
+ return prot;
+ }
+
+ static void *iova_to_va(int dev_fd, uint64_t iova, uint64_t *len)
+ {
+ void *addr;
+ size_t size;
+ struct vduse_iotlb_entry entry;
+
+ entry.start = iova;
+ if (ioctl(dev_fd, VDUSE_IOTLB_GET_ENTRY, &entry))
+ return NULL;
+
+ size = entry.last - entry.start + 1;
+ *len = entry.last - iova + 1;
+ addr = mmap(0, size, perm_to_prot(entry.perm), MAP_SHARED,
+ entry.fd, entry.offset);
+
+ if (addr == MAP_FAILED)
+ return NULL;
+
+ /* do something to cache this iova region */
+
+ return addr + iova - entry.start;
+ }
+
+Besides, the following ioctls on the VDUSE device file are provided to support
+interrupt injection and setting up eventfd for virtqueue kicks:
+
+- VDUSE_VQ_SETUP_KICKFD: set the kickfd for virtqueue, this eventfd is used
+ by VDUSE kernel module to notify userspace to consume the vring.
+
+- VDUSE_INJECT_VQ_IRQ: inject an interrupt for specific virtqueue
+
+- VDUSE_INJECT_CONFIG_IRQ: inject a config interrupt
+
+Register VDUSE device on vDPA bus
+---------------------------------
+In order to make the VDUSE device work, administrator needs to use the management
+API (netlink) to register it on vDPA bus. Some sample codes are show below:
+
+.. code-block:: c
+
+ static int netlink_add_vduse(const char *name, int device_id)
+ {
+ struct nl_sock *nlsock;
+ struct nl_msg *msg;
+ int famid;
+
+ nlsock = nl_socket_alloc();
+ if (!nlsock)
+ return -ENOMEM;
+
+ if (genl_connect(nlsock))
+ goto free_sock;
+
+ famid = genl_ctrl_resolve(nlsock, VDPA_GENL_NAME);
+ if (famid < 0)
+ goto close_sock;
+
+ msg = nlmsg_alloc();
+ if (!msg)
+ goto close_sock;
+
+ if (!genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, famid, 0, 0,
+ VDPA_CMD_DEV_NEW, 0))
+ goto nla_put_failure;
+
+ NLA_PUT_STRING(msg, VDPA_ATTR_DEV_NAME, name);
+ NLA_PUT_STRING(msg, VDPA_ATTR_MGMTDEV_DEV_NAME, "vduse");
+ NLA_PUT_U32(msg, VDPA_ATTR_DEV_ID, device_id);
+
+ if (nl_send_sync(nlsock, msg))
+ goto close_sock;
+
+ nl_close(nlsock);
+ nl_socket_free(nlsock);
+
+ return 0;
+ nla_put_failure:
+ nlmsg_free(msg);
+ close_sock:
+ nl_close(nlsock);
+ free_sock:
+ nl_socket_free(nlsock);
+ return -1;
+ }
+
+MMU-based IOMMU Driver
+----------------------
+VDUSE framework implements an MMU-based on-chip IOMMU driver to support
+mapping the kernel DMA buffer into the userspace iova region dynamically.
+This is mainly designed for virtio-vdpa case (kernel virtio drivers).
+
+The basic idea behind this driver is treating MMU (VA->PA) as IOMMU (IOVA->PA).
+The driver will set up MMU mapping instead of IOMMU mapping for the DMA transfer
+so that the userspace process is able to use its virtual address to access
+the DMA buffer in kernel.
+
+And to avoid security issue, a bounce-buffering mechanism is introduced to
+prevent userspace accessing the original buffer directly which may contain other
+kernel data. During the mapping, unmapping, the driver will copy the data from
+the original buffer to the bounce buffer and back, depending on the direction of
+the transfer. And the bounce-buffer addresses will be mapped into the user address
+space instead of the original one.
--
2.11.0
