[PATCH 09/13] bdi: remove BDI_CAP_SYNCHRONOUS_IO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to
decided if ->rw_page can be used on a block device.  Just check up for
the method instead.  The only complication is that zram needs a second
set of block_device_operations as it can switch between modes that
actually support ->rw_page and those who don't.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Reviewed-by: Jan Kara <jack@xxxxxxx>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@xxxxxxx>
---
 drivers/block/brd.c           |  1 -
 drivers/block/zram/zram_drv.c | 19 +++++++++++++------
 drivers/nvdimm/btt.c          |  2 --
 drivers/nvdimm/pmem.c         |  1 -
 include/linux/backing-dev.h   |  9 ---------
 mm/swapfile.c                 |  2 +-
 6 files changed, 14 insertions(+), 20 deletions(-)

diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 2723a70eb85593..cc49a921339f77 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -403,7 +403,6 @@ static struct brd_device *brd_alloc(int i)
 	disk->flags		= GENHD_FL_EXT_DEVT;
 	sprintf(disk->disk_name, "ram%d", i);
 	set_capacity(disk, rd_size * 2);
-	brd->brd_queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
 
 	/* Tell the block layer that this is not a rotational device */
 	blk_queue_flag_set(QUEUE_FLAG_NONROT, brd->brd_queue);
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index a356275605b104..1b51bb664f91f5 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -52,6 +52,9 @@ static unsigned int num_devices = 1;
  */
 static size_t huge_class_size;
 
+static const struct block_device_operations zram_devops;
+static const struct block_device_operations zram_wb_devops;
+
 static void zram_free_page(struct zram *zram, size_t index);
 static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
 				u32 index, int offset, struct bio *bio);
@@ -408,8 +411,7 @@ static void reset_bdev(struct zram *zram)
 	zram->backing_dev = NULL;
 	zram->old_block_size = 0;
 	zram->bdev = NULL;
-	zram->disk->queue->backing_dev_info->capabilities |=
-				BDI_CAP_SYNCHRONOUS_IO;
+	zram->disk->fops = &zram_devops;
 	kvfree(zram->bitmap);
 	zram->bitmap = NULL;
 }
@@ -528,8 +530,7 @@ static ssize_t backing_dev_store(struct device *dev,
 	 * freely but in fact, IO is going on so finally could cause
 	 * use-after-free when the IO is really done.
 	 */
-	zram->disk->queue->backing_dev_info->capabilities &=
-			~BDI_CAP_SYNCHRONOUS_IO;
+	zram->disk->fops = &zram_wb_devops;
 	up_write(&zram->init_lock);
 
 	pr_info("setup backing device %s\n", file_name);
@@ -1819,6 +1820,13 @@ static const struct block_device_operations zram_devops = {
 	.owner = THIS_MODULE
 };
 
+static const struct block_device_operations zram_wb_devops = {
+	.open = zram_open,
+	.submit_bio = zram_submit_bio,
+	.swap_slot_free_notify = zram_slot_free_notify,
+	.owner = THIS_MODULE
+};
+
 static DEVICE_ATTR_WO(compact);
 static DEVICE_ATTR_RW(disksize);
 static DEVICE_ATTR_RO(initstate);
@@ -1946,8 +1954,7 @@ static int zram_add(void)
 	if (ZRAM_LOGICAL_BLOCK_SIZE == PAGE_SIZE)
 		blk_queue_max_write_zeroes_sectors(zram->disk->queue, UINT_MAX);
 
-	zram->disk->queue->backing_dev_info->capabilities |=
-			(BDI_CAP_STABLE_WRITES | BDI_CAP_SYNCHRONOUS_IO);
+	zram->disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES;
 	device_add_disk(NULL, zram->disk, zram_disk_attr_groups);
 
 	strlcpy(zram->compressor, default_compressor, sizeof(zram->compressor));
diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
index 0d710140bf93be..12ff6f8784ac11 100644
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -1537,8 +1537,6 @@ static int btt_blk_init(struct btt *btt)
 	btt->btt_disk->private_data = btt;
 	btt->btt_disk->queue = btt->btt_queue;
 	btt->btt_disk->flags = GENHD_FL_EXT_DEVT;
-	btt->btt_disk->queue->backing_dev_info->capabilities |=
-			BDI_CAP_SYNCHRONOUS_IO;
 
 	blk_queue_logical_block_size(btt->btt_queue, btt->sector_size);
 	blk_queue_max_hw_sectors(btt->btt_queue, UINT_MAX);
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 140cf3b9000c60..1711fdfd8d2816 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -475,7 +475,6 @@ static int pmem_attach_disk(struct device *dev,
 	disk->queue		= q;
 	disk->flags		= GENHD_FL_EXT_DEVT;
 	disk->private_data	= pmem;
-	disk->queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
 	nvdimm_namespace_disk_name(ndns, disk->disk_name);
 	set_capacity(disk, (pmem->size - pmem->pfn_pad - pmem->data_offset)
 			/ 512);
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 52583b6f2ea05d..860ea33571bce5 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -122,9 +122,6 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
  * BDI_CAP_NO_WRITEBACK:   Don't write pages back
  * BDI_CAP_NO_ACCT_WB:     Don't automatically account writeback pages
  * BDI_CAP_STRICTLIMIT:    Keep number of dirty pages below bdi threshold.
- *
- * BDI_CAP_SYNCHRONOUS_IO: Device is so fast that asynchronous IO would be
- *			   inefficient.
  */
 #define BDI_CAP_NO_ACCT_DIRTY	0x00000001
 #define BDI_CAP_NO_WRITEBACK	0x00000002
@@ -132,7 +129,6 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
 #define BDI_CAP_STABLE_WRITES	0x00000008
 #define BDI_CAP_STRICTLIMIT	0x00000010
 #define BDI_CAP_CGROUP_WRITEBACK 0x00000020
-#define BDI_CAP_SYNCHRONOUS_IO	0x00000040
 
 #define BDI_CAP_NO_ACCT_AND_WRITEBACK \
 	(BDI_CAP_NO_WRITEBACK | BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_ACCT_WB)
@@ -174,11 +170,6 @@ static inline int wb_congested(struct bdi_writeback *wb, int cong_bits)
 long congestion_wait(int sync, long timeout);
 long wait_iff_congested(int sync, long timeout);
 
-static inline bool bdi_cap_synchronous_io(struct backing_dev_info *bdi)
-{
-	return bdi->capabilities & BDI_CAP_SYNCHRONOUS_IO;
-}
-
 static inline bool bdi_cap_stable_pages_required(struct backing_dev_info *bdi)
 {
 	return bdi->capabilities & BDI_CAP_STABLE_WRITES;
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 12f59e641b5e29..986fe5aad30e18 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -3237,7 +3237,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
 	if (bdi_cap_stable_pages_required(inode_to_bdi(inode)))
 		p->flags |= SWP_STABLE_WRITES;
 
-	if (bdi_cap_synchronous_io(inode_to_bdi(inode)))
+	if (p->bdev && p->bdev->bd_disk->fops->rw_page)
 		p->flags |= SWP_SYNCHRONOUS_IO;
 
 	if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) {
-- 
2.28.0




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux