Here's a set of patches that adds a system call, fsinfo(), that allows
information about the VFS, mount topology, superblock and files to be
retrieved.
The patchset is based on top of the notifications patchset and allows event
counters implemented in the latter to be retrieved to allow overruns to be
efficiently managed.
=======
THE WHY
=======
Why do we want this?
Using /proc/mounts (or similar) has problems:
(1) Reading from it holds a global lock (namespace_sem) that prevents
mounting and unmounting. Lots of data is encoded and mangled into
text whilst the lock is held, including superblock option strings and
mount point paths. This causes performance problems when there are a
lot of mount objects in a system.
(2) Even though namespace_sem is held during a read, reading the whole
file isn't necessarily atomic with respect to mount-type operations.
If a read isn't satisfied in one go, then it may return to userspace
briefly and then continue reading some way into the file. But changes
can occur in the interval that may then go unseen.
(3) Determining what has changed means parsing and comparing consecutive
outputs of /proc/mounts.
(4) Querying a specific mount or superblock means searching through
/proc/mounts and searching by path or mount ID - but we might have an
fd we want to query.
(5) Whilst you can poll() it for events, it only tells you that something
changed in the namespace, not what or whether you can even see the
change.
To fix the notification issues, the preceding notifications patchset added
mount watch notifications whereby you can watch for notifications in a
specific mount subtree. The notification messages include the ID(s) of the
affected mounts.
To support notifications, however, we need to be able to handle overruns in
the notification queue. I added a number of event counters to struct
super_block and struct mount to allow you to pin down the changes, but
there needs to be a way to retrieve them. Exposing them through /proc
would require adding yet another /proc/mounts-type file. We could add
per-mount directories full of attributes in sysfs, but that has issues also
(see below).
Adding an extensible system call interface for retrieving filesystem
information also allows other things to be exposed:
(1) Jeff Layton's error handling changes need a way to allow error event
information to be retrieved.
(2) Bits in masks returned by things like statx() and FS_IOC_GETFLAGS are
actually 3-state { Set, Unset, Not supported }. It could be useful to
provide a way to expose information like this[*].
(3) Limits of the numerical metadata values in a filesystem[*].
(4) Filesystem capability information[*]. Filesystems don't all have the
same capabilities, and even different instances may have different
capabilities, particularly with network filesystems where the set of
may be server-dependent. Capabilities might even vary at file
granularity - though possibly such information should be conveyed
through statx() instead.
(5) ID mapping/shifting tables in use for a superblock.
(6) Filesystem-specific information. I need something for AFS so that I
can do pioctl()-emulation, thereby allowing me to implement certain of
the AFS command line utilities that query state of a particular file.
This could also have application for other filesystems, such as NFS,
CIFS and ext4.
[*] In a lot of cases these are probably invariant and can be memcpy'd
from static data.
There's a further consideration: I want to make it possible to have
fsconfig(fd, FSCONFIG_CMD_CREATE) be intercepted by a container manager
such that the manager can supervise a mount attempted inside the container.
The manager would be given an fd pointing to the fs_context struct and
would then need some way to query it (fsinfo()) and modify it (fsconfig()).
This could also be used to arbitrate user-requested mounts when containers
are not in play.
================
DESIGN DECISIONS
================
(1) Information is partitioned into sets of attributes.
(2) Attribute IDs are integers as they're fast to compare.
(3) Attribute values are typed (struct, list of structs, string, opaque
blob). They type is fixed for a particular attribute.
(4) For structure types, the length is also a version. New fields can be
tacked onto the end.
(5) When copying a versioned struct to userspace, the core handles a
version mismatch by truncating or zero-padding the data as necessary.
This is transparent to the filesystem.
(6) The core handles all the buffering and buffer resizing.
(7) The filesystem never gets any access to the userspace parameter buffer
or result buffer.
(8) "Meta" attributes can describe other attributes.
========
OVERVIEW
========
fsinfo() is a system call that allows information about the filesystem at a
particular path point to be queried as a set of attributes.
Attribute values are of four basic types:
(1) Structure with version-dependent length (the length is the version).
(2) Variable-length string.
(3) List of structures (all the same length).
(4) Opaque blob.
Attributes can have multiple values either as a sequence of values or a
sequence-of-sequences of values and all the values of a particular
attribute must be of the same type. Values can be up to INT_MAX size,
subject to memory availability.
Note that the values of an attribute *are* allowed to vary between dentries
within a single superblock, depending on the specific dentry that you're
looking at, but the values still have to be of the type for that attribute.
I've tried to make the interface as light as possible, so integer attribute
IDs rather than string and the core does all the buffer allocation and
expansion and all the extensibility support work rather than leaving that
to the filesystems. This also means that userspace pointers are not
exposed to the filesystem.
fsinfo() allows a variety of information to be retrieved about a filesystem
and the mount topology:
(1) General superblock attributes:
- Filesystem identifiers (UUID, volume label, device numbers, ...)
- The limits on a filesystem's capabilities
- Information on supported statx fields and attributes and IOC flags.
- A variety single-bit flags indicating supported capabilities.
- Timestamp resolution and range.
- The amount of space/free space in a filesystem (as statfs()).
- Superblock notification counter.
(2) Filesystem-specific superblock attributes:
- Superblock-level timestamps.
- Cell name, workgroup or other netfs grouping concept.
- Server names and addresses.
(3) VFS information:
- Mount topology information.
- Mount attributes.
- Mount notification counter.
- Mount point path.
(4) Information about what the fsinfo() syscall itself supports, including
the type and struct size of attributes.
The system is extensible:
(1) New attributes can be added. There is no requirement that a
filesystem implement every attribute. A helper function is provided
to scan a list of attributes and a filesystem can have multiple such
lists.
(2) Version length-dependent structure attributes can be made larger and
have additional information tacked on the end, provided it keeps the
layout of the existing fields. If an older process asks for a shorter
structure, it will only be given the bits it asks for. If a newer
process asks for a longer structure on an older kernel, the extra
space will be set to 0. In all cases, the size of the data actually
available is returned.
In essence, the size of a structure is that structure's version: a
smaller size is an earlier version and a later version includes
everything that the earlier version did.
(3) New single-bit capability flags can be added. This is a structure-typed
attribute and, as such, (2) applies. Any bits you wanted but the kernel
doesn't support are automatically set to 0.
fsinfo() may be called like the following, for example:
struct fsinfo_params params = {
.at_flags = AT_SYMLINK_NOFOLLOW,
.flags = FSINFO_FLAGS_QUERY_PATH,
.request = FSINFO_ATTR_AFS_SERVER_ADDRESSES,
.Nth = 2,
};
struct fsinfo_server_address address;
len = fsinfo(AT_FDCWD, "/afs/grand.central.org/doc",
¶ms, sizeof(params),
&address, sizeof(address));
The above example would query an AFS filesystem to retrieve the address
list for the 3rd server, and:
struct fsinfo_params params = {
.at_flags = AT_SYMLINK_NOFOLLOW,
.flags = FSINFO_FLAGS_QUERY_PATH,
.request = FSINFO_ATTR_NFS_SERVER_NAME;
};
char server_name[256];
len = fsinfo(AT_FDCWD, "/home/dhowells/",
¶ms, sizeof(params),
&server_name, sizeof(server_name));
would retrieve the name of the NFS server as a string.
In future, I want to make fsinfo() capable of querying a context created by
fsopen() or fspick(), e.g.:
fd = fsopen("ext4", 0);
struct fsinfo_params params = {
.flags = FSINFO_FLAGS_QUERY_FSCONTEXT,
.request = FSINFO_ATTR_CONFIGURATION;
};
char buffer[65536];
fsinfo(fd, NULL, ¶ms, sizeof(params), &buffer, sizeof(buffer));
even if that context doesn't currently have a superblock attached.
The patches can be found here also:
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git
on branch:
fsinfo-core
===================
SIGNIFICANT CHANGES
===================
ver #21:
(*) Moved the mount event counters here from the mount notifications
patchset. Made the counters in the kernel atomic_long_t and the UAPI
counters __u64.
(*) Added Jeff Layton's patches to allow userspace to retrieve writeback
error information through fsinfo().
ver #20:
(*) Changed MOUNT_PROPAGATION_SLAVE to MOUNT_PROPAGATION_DEPENDENT and
renamed the fields in the fsinfo_mount_topology struct. The
MOUNT_PROPAGATION_* settings have been turned into an enum and will
also be passed to mount_setattr().
(*) Adjusted the Ext4 patch from feedback and removed the example status
from it.
(*) Dropped the NFS patch.
(*) I've dropped the superblock notifications for now.
ver #19:
(*) Split FSINFO_ATTR_MOUNT_TOPOLOGY from FSINFO_ATTR_MOUNT_INFO. The
latter requires no locking as it looks no further than the mount
object it's dealing with. The topology attribute, however, has to
take the namespace lock. That said, the info attribute includes a
counter that indicates how many times a mount object's position in the
topology has changed.
(*) A bit of patch rearrangement to put the mount topology-exposing
attributes into one patch.
(*) Pass both AT_* and RESOLVE_* flags to fsinfo() as suggested by Linus,
rather than adding missing RESOLVE_* flags.
David
---
David Howells (15):
fsinfo: Introduce a non-repeating system-unique superblock ID
fsinfo: Add fsinfo() syscall to query filesystem information
fsinfo: Provide a bitmap of the features a filesystem supports
fsinfo: Allow retrieval of superblock devname, options and stats
fsinfo: Allow fsinfo() to look up a mount object by ID
fsinfo: Add a uniquifier ID to struct mount
fsinfo: Allow mount information to be queried
fsinfo: Allow mount topology and propagation info to be retrieved
watch_queue: Mount event counters
fsinfo: Provide notification overrun handling support
fsinfo: sample: Mount listing program
fsinfo: Add API documentation
fsinfo: Add support for AFS
fsinfo: Add support to ext4
fsinfo: Add an attribute that lists all the visible mounts in a namespace
Jeff Layton (3):
errseq: add a new errseq_scrape function
vfs: allow fsinfo to fetch the current state of s_wb_err
samples: add error state information to test-fsinfo.c
Documentation/filesystems/fsinfo.rst | 574 +++++++++++++
arch/alpha/kernel/syscalls/syscall.tbl | 1 +
arch/arm/tools/syscall.tbl | 1 +
arch/arm64/include/asm/unistd.h | 2 +-
arch/arm64/include/asm/unistd32.h | 2 +
arch/ia64/kernel/syscalls/syscall.tbl | 1 +
arch/m68k/kernel/syscalls/syscall.tbl | 1 +
arch/microblaze/kernel/syscalls/syscall.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n32.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n64.tbl | 1 +
arch/mips/kernel/syscalls/syscall_o32.tbl | 1 +
arch/parisc/kernel/syscalls/syscall.tbl | 1 +
arch/powerpc/kernel/syscalls/syscall.tbl | 1 +
arch/s390/kernel/syscalls/syscall.tbl | 1 +
arch/sh/kernel/syscalls/syscall.tbl | 1 +
arch/sparc/kernel/syscalls/syscall.tbl | 1 +
arch/x86/entry/syscalls/syscall_32.tbl | 1 +
arch/x86/entry/syscalls/syscall_64.tbl | 1 +
arch/xtensa/kernel/syscalls/syscall.tbl | 1 +
fs/Kconfig | 7 +
fs/Makefile | 1 +
fs/afs/internal.h | 1 +
fs/afs/super.c | 216 ++++-
fs/d_path.c | 2 +-
fs/ext4/Makefile | 1 +
fs/ext4/ext4.h | 6 +
fs/ext4/fsinfo.c | 97 +++
fs/ext4/super.c | 3 +
fs/fsinfo.c | 748 +++++++++++++++++
fs/internal.h | 15 +
fs/mount.h | 6 +
fs/mount_notify.c | 10 +-
fs/namespace.c | 427 +++++++++-
include/linux/errseq.h | 1 +
include/linux/fs.h | 4 +
include/linux/fsinfo.h | 112 +++
include/linux/syscalls.h | 4 +
include/uapi/asm-generic/unistd.h | 4 +-
include/uapi/linux/fsinfo.h | 344 ++++++++
include/uapi/linux/mount.h | 13 +-
kernel/sys_ni.c | 1 +
lib/errseq.c | 33 +-
samples/vfs/Makefile | 6 +-
samples/vfs/test-fsinfo.c | 883 ++++++++++++++++++++
samples/vfs/test-mntinfo.c | 277 ++++++
45 files changed, 3802 insertions(+), 14 deletions(-)
create mode 100644 Documentation/filesystems/fsinfo.rst
create mode 100644 fs/ext4/fsinfo.c
create mode 100644 fs/fsinfo.c
create mode 100644 include/linux/fsinfo.h
create mode 100644 include/uapi/linux/fsinfo.h
create mode 100644 samples/vfs/test-fsinfo.c
create mode 100644 samples/vfs/test-mntinfo.c
