Re: linux-next: umh: fix processed error when UMH_WAIT_PROC is used seems to break linux bridge on s390x (bisected)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 24.06.20 18:09, Luis Chamberlain wrote:
> On Wed, Jun 24, 2020 at 05:54:46PM +0200, Christian Borntraeger wrote:
>>
>>
>> On 24.06.20 16:43, Christoph Hellwig wrote:
>>> On Wed, Jun 24, 2020 at 01:11:54PM +0200, Christian Borntraeger wrote:
>>>> Does anyone have an idea why "umh: fix processed error when UMH_WAIT_PROC is used" breaks the
>>>> linux-bridge on s390?
>>>
>>> Are we even sure this is s390 specific and doesn't happen on other
>>> architectures with the same bridge setup?
>>
>> Fair point. AFAIK nobody has tested this yet on x86.
> 
> Regardless, can you enable dynamic debug prints, to see if the kernel
> reveals anything on the bridge code which may be relevant:
> 
> echo "file net/bridge/* +p" > /sys/kernel/debug/dynamic_debug/control
> 
>   Luis

When I start a guest the following happens with the patch:

[   47.420237] virbr0: port 2(vnet0) entered blocking state
[   47.420242] virbr0: port 2(vnet0) entered disabled state
[   47.420315] device vnet0 entered promiscuous mode
[   47.420365] virbr0: port 2(vnet0) event 16
[   47.420366] virbr0: br_fill_info event 16 port vnet0 master virbr0
[   47.420373] virbr0: toggle option: 12 state: 0 -> 0
[   47.420536] virbr0: port 2(vnet0) entered blocking state
[   47.420538] virbr0: port 2(vnet0) event 16
[   47.420539] virbr0: br_fill_info event 16 port vnet0 master virbr0

and the nothing happens.


without the patch
[   33.805410] virbr0: hello timer expired
[   35.805413] virbr0: hello timer expired
[   36.184349] virbr0: port 2(vnet0) entered blocking state
[   36.184353] virbr0: port 2(vnet0) entered disabled state
[   36.184427] device vnet0 entered promiscuous mode
[   36.184479] virbr0: port 2(vnet0) event 16
[   36.184480] virbr0: br_fill_info event 16 port vnet0 master virbr0
[   36.184487] virbr0: toggle option: 12 state: 0 -> 0
[   36.184636] virbr0: port 2(vnet0) entered blocking state
[   36.184638] virbr0: port 2(vnet0) entered listening state
[   36.184639] virbr0: port 2(vnet0) event 16
[   36.184640] virbr0: br_fill_info event 16 port vnet0 master virbr0
[   36.184645] virbr0: port 2(vnet0) event 16
[   36.184646] virbr0: br_fill_info event 16 port vnet0 master virbr0
[   37.805478] virbr0: hello timer expired
[   38.205413] virbr0: port 2(vnet0) forward delay timer
[   38.205414] virbr0: port 2(vnet0) entered learning state
[   38.205427] virbr0: port 2(vnet0) event 16
[   38.205430] virbr0: br_fill_info event 16 port vnet0 master virbr0
[   38.765414] virbr0: port 2(vnet0) hold timer expired
[   39.805415] virbr0: hello timer expired
[   40.285410] virbr0: port 2(vnet0) forward delay timer
[   40.285411] virbr0: port 2(vnet0) entered forwarding state
[   40.285418] virbr0: topology change detected, propagating
[   40.285420] virbr0: decreasing ageing time to 400
[   40.285427] virbr0: port 2(vnet0) event 16
[   40.285432] virbr0: br_fill_info event 16 port vnet0 master virbr0
[   40.765408] virbr0: port 2(vnet0) hold timer expired
[   41.805415] virbr0: hello timer expired
[   42.765426] virbr0: port 2(vnet0) hold timer expired
[   43.805425] virbr0: hello timer expired
[   44.765426] virbr0: port 2(vnet0) hold timer expired
[   45.805418] virbr0: hello timer expired

and continuing....







[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux