Hey everyone, This is the implementation of shiftfs which was cooked up during lunch at Linux Plumbers 2019 the day after the container's microconference. The idea is a design-stew from Stéphane, Aleksa, Eric, and myself. Back then we all were quite busy with other work and couldn't really sit down and implement it. But I took a few days last week to do this work, including demos and performance testing. This implementation does not require us to touch the vfs substantially at all. Instead, we implement shiftfs via fsid mappings. With this patch, it took me 20 mins to port both LXD and LXC to support shiftfs via fsid mappings. For anyone wanting to play with this the branch can be pulled from: https://github.com/brauner/linux/tree/fsid_mappings https://gitlab.com/brauner/linux/-/tree/fsid_mappings https://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git/log/?h=fsid_mappings The main use case for shiftfs for us is in allowing shared writable storage to multiple containers using non-overlapping id mappings. In such a scenario you want the fsids to be valid and identical in both containers for the shared mount. A demo for this exists in [3]. If you don't want to read on, go straight to the other demos below in [1] and [2]. People not as familiar with user namespaces might not be aware that fsid mappings already exist. Right now, fsid mappings are always identical to id mappings. Specifically, the kernel will lookup fsuids in the uid mappings and fsgids in the gid mappings of the relevant user namespace. With this patch series we simply introduce the ability to create fsid mappings that are different from the id mappings of a user namespace. In the usual case of running an unprivileged container we will have setup an id mapping, e.g. 0 100000 100000. The on-disk mapping will correspond to this id mapping, i.e. all files which we want to appear as 0:0 inside the user namespace will be chowned to 100000:100000 on the host. This works, because whenever the kernel needs to do a filesystem access it will lookup the corresponding uid and gid in the idmapping tables of the container. Now think about the case where we want to have an id mapping of 0 100000 100000 but an on-disk mapping of 0 300000 100000 which is needed to e.g. share a single on-disk mapping with multiple containers that all have different id mappings. This will be problematic. Whenever a filesystem access is requested, the kernel will now try to lookup a mapping for 300000 in the id mapping tables of the user namespace but since there is none the files will appear to be owned by the overflow id, i.e. usually 65534:65534 or nobody:nogroup. With fsid mappings we can solve this by writing an id mapping of 0 100000 100000 and an fsid mapping of 0 300000 100000. On filesystem access the kernel will now lookup the mapping for 300000 in the fsid mapping tables of the user namespace. And since such a mapping exists, the corresponding files will have correct ownership. A note on proc (and sys), the proc filesystem is special in sofar as it only has a single superblock that is (currently but might be about to change) visible in all user namespaces (same goes for sys). This means it has special semantics in many ways, including how file ownership and access works. The fsid mapping implementation does not alter how proc (and sys) ownership works. proc and sys will both continue to lookup filesystem access in id mapping tables. When Writing fsid mappings the same rules apply as when writing id mappings so I won't reiterate them here. The limit of fs id mappings is the same as for id mappings, i.e. 340 lines. # Performance Back when I extended the range of possible id mappings to 340 I did performance testing by booting into single user mode, creating 1,000,000 files to fstat()ing them and calculated the mean fstat() time per file. (Back when Linux was still fast. I won't mention that the stat numbers have (thanks microcode!) doubled since then...) I did the same test for this patchset: one vanilla kernel, one kernel with my fsid mapping patches but CONFIG_USER_NS_FSID set to n and one with fsid mappings patches enabled. I then ran the same test on all three kernels and compared the numbers. The implementation does not introduce overhead. That's all I can say. Here are the numbers: | vanilla v5.5 | fsid mappings | fsid mappings | fsid mappings | | | disabled in Kconfig | enabled in Kconfig | enabled in Kconfig | | | | and unset for all | and set for all | | | | test cases | test cases | -------------|--------------|---------------------|--------------------|--------------------| 0 mappings | 367 ns | 365 ns | 365 ns | N/A | 1 mappings | 362 ns | 367 ns | 363 ns | 363 ns | 2 mappings | 361 ns | 369 ns | 363 ns | 364 ns | 3 mappings | 361 ns | 368 ns | 366 ns | 365 ns | 5 mappings | 365 ns | 368 ns | 363 ns | 365 ns | 10 mappings | 391 ns | 388 ns | 387 ns | 389 ns | 50 mappings | 395 ns | 398 ns | 401 ns | 397 ns | 100 mappings | 400 ns | 405 ns | 399 ns | 399 ns | 200 mappings | 404 ns | 407 ns | 430 ns | 404 ns | 300 mappings | 492 ns | 494 ns | 432 ns | 413 ns | 340 mappings | 495 ns | 497 ns | 500 ns | 484 ns | # Demos [1]: Create a container with different id and fsid mappings. https://asciinema.org/a/300233 [2]: Create a container with id mappings but without fsid mappings. https://asciinema.org/a/300234 [3]: Share storage between multiple containers with non-overlapping id mappings. https://asciinema.org/a/300235 Thanks! Christian Christian Brauner (24): user_namespace: introduce fsid mappings infrastructure proc: add /proc/<pid>/fsuid_map proc: add /proc/<pid>/fsgid_map fsuidgid: add fsid mapping helpers proc: task_state(): use from_kfs{g,u}id_munged fs: add is_userns_visible() helper namei: may_{o_}create(): handle fsid mappings inode: inode_owner_or_capable(): handle fsid mappings capability: privileged_wrt_inode_uidgid(): handle fsid mappings stat: handle fsid mappings open: chown_common(): handle fsid mappings posix_acl: handle fsid mappings attr: notify_change(): handle fsid mappings commoncap: cap_task_fix_setuid(): handle fsid mappings commoncap:cap_bprm_set_creds(): handle fsid mappings sys: __sys_setfsuid(): handle fsid mappings sys: __sys_setfsgid(): handle fsid mappings sys:__sys_setuid(): handle fsid mappings sys:__sys_setgid(): handle fsid mappings sys:__sys_setreuid(): handle fsid mappings sys:__sys_setregid(): handle fsid mappings sys:__sys_setresuid(): handle fsid mappings sys:__sys_setresgid(): handle fsid mappings devpts: handle fsid mappings fs/attr.c | 23 ++- fs/devpts/inode.c | 7 +- fs/inode.c | 7 +- fs/namei.c | 21 ++- fs/open.c | 10 +- fs/posix_acl.c | 21 +-- fs/proc/array.c | 5 +- fs/proc/base.c | 34 ++++ fs/stat.c | 48 ++++-- include/linux/fs.h | 5 + include/linux/fsuidgid.h | 70 ++++++++ include/linux/stat.h | 1 + include/linux/user_namespace.h | 10 ++ init/Kconfig | 11 ++ kernel/capability.c | 13 +- kernel/sys.c | 83 ++++++--- kernel/user.c | 22 +++ kernel/user_namespace.c | 303 ++++++++++++++++++++++++++++++++- security/commoncap.c | 19 ++- 19 files changed, 638 insertions(+), 75 deletions(-) create mode 100644 include/linux/fsuidgid.h base-commit: d5226fa6dbae0569ee43ecfc08bdcd6770fc4755 -- 2.25.0
