Re: [PATCH] Add prctl support for controlling mem reclaim V4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 11, 2019 at 4:19 PM Mike Christie <mchristi@xxxxxxxxxx> wrote:
>
> There are several storage drivers like dm-multipath, iscsi, tcmu-runner,
> amd nbd that have userspace components that can run in the IO path. For
> example, iscsi and nbd's userspace deamons may need to recreate a socket
> and/or send IO on it, and dm-multipath's daemon multipathd may need to
> send SG IO or read/write IO to figure out the state of paths and re-set
> them up.
>
> In the kernel these drivers have access to GFP_NOIO/GFP_NOFS and the
> memalloc_*_save/restore functions to control the allocation behavior,
> but for userspace we would end up hitting an allocation that ended up
> writing data back to the same device we are trying to allocate for.
> The device is then in a state of deadlock, because to execute IO the
> device needs to allocate memory, but to allocate memory the memory
> layers want execute IO to the device.
>
> Here is an example with nbd using a local userspace daemon that performs
> network IO to a remote server. We are using XFS on top of the nbd device,
> but it can happen with any FS or other modules layered on top of the nbd
> device that can write out data to free memory.  Here a nbd daemon helper
> thread, msgr-worker-1, is performing a write/sendmsg on a socket to execute
> a request. This kicks off a reclaim operation which results in a WRITE to
> the nbd device and the nbd thread calling back into the mm layer.
>
> [ 1626.609191] msgr-worker-1   D    0  1026      1 0x00004000
> [ 1626.609193] Call Trace:
> [ 1626.609195]  ? __schedule+0x29b/0x630
> [ 1626.609197]  ? wait_for_completion+0xe0/0x170
> [ 1626.609198]  schedule+0x30/0xb0
> [ 1626.609200]  schedule_timeout+0x1f6/0x2f0
> [ 1626.609202]  ? blk_finish_plug+0x21/0x2e
> [ 1626.609204]  ? _xfs_buf_ioapply+0x2e6/0x410
> [ 1626.609206]  ? wait_for_completion+0xe0/0x170
> [ 1626.609208]  wait_for_completion+0x108/0x170
> [ 1626.609210]  ? wake_up_q+0x70/0x70
> [ 1626.609212]  ? __xfs_buf_submit+0x12e/0x250
> [ 1626.609214]  ? xfs_bwrite+0x25/0x60
> [ 1626.609215]  xfs_buf_iowait+0x22/0xf0
> [ 1626.609218]  __xfs_buf_submit+0x12e/0x250
> [ 1626.609220]  xfs_bwrite+0x25/0x60
> [ 1626.609222]  xfs_reclaim_inode+0x2e8/0x310
> [ 1626.609224]  xfs_reclaim_inodes_ag+0x1b6/0x300
> [ 1626.609227]  xfs_reclaim_inodes_nr+0x31/0x40
> [ 1626.609228]  super_cache_scan+0x152/0x1a0
> [ 1626.609231]  do_shrink_slab+0x12c/0x2d0
> [ 1626.609233]  shrink_slab+0x9c/0x2a0
> [ 1626.609235]  shrink_node+0xd7/0x470
> [ 1626.609237]  do_try_to_free_pages+0xbf/0x380
> [ 1626.609240]  try_to_free_pages+0xd9/0x1f0
> [ 1626.609245]  __alloc_pages_slowpath+0x3a4/0xd30
> [ 1626.609251]  ? ___slab_alloc+0x238/0x560
> [ 1626.609254]  __alloc_pages_nodemask+0x30c/0x350
> [ 1626.609259]  skb_page_frag_refill+0x97/0xd0
> [ 1626.609274]  sk_page_frag_refill+0x1d/0x80
> [ 1626.609279]  tcp_sendmsg_locked+0x2bb/0xdd0
> [ 1626.609304]  tcp_sendmsg+0x27/0x40
> [ 1626.609307]  sock_sendmsg+0x54/0x60
> [ 1626.609308]  ___sys_sendmsg+0x29f/0x320
> [ 1626.609313]  ? sock_poll+0x66/0xb0
> [ 1626.609318]  ? ep_item_poll.isra.15+0x40/0xc0
> [ 1626.609320]  ? ep_send_events_proc+0xe6/0x230
> [ 1626.609322]  ? hrtimer_try_to_cancel+0x54/0xf0
> [ 1626.609324]  ? ep_read_events_proc+0xc0/0xc0
> [ 1626.609326]  ? _raw_write_unlock_irq+0xa/0x20
> [ 1626.609327]  ? ep_scan_ready_list.constprop.19+0x218/0x230
> [ 1626.609329]  ? __hrtimer_init+0xb0/0xb0
> [ 1626.609331]  ? _raw_spin_unlock_irq+0xa/0x20
> [ 1626.609334]  ? ep_poll+0x26c/0x4a0
> [ 1626.609337]  ? tcp_tsq_write.part.54+0xa0/0xa0
> [ 1626.609339]  ? release_sock+0x43/0x90
> [ 1626.609341]  ? _raw_spin_unlock_bh+0xa/0x20
> [ 1626.609342]  __sys_sendmsg+0x47/0x80
> [ 1626.609347]  do_syscall_64+0x5f/0x1c0
> [ 1626.609349]  ? prepare_exit_to_usermode+0x75/0xa0
> [ 1626.609351]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
>
> This patch adds a new prctl command that daemons can use after they have
> done their initial setup, and before they start to do allocations that
> are in the IO path. It sets the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE
> flags so both userspace block and FS threads can use it to avoid the
> allocation recursion and try to prevent from being throttled while
> writing out data to free up memory.
>
> Signed-off-by: Mike Christie <mchristi@xxxxxxxxxx>
> Acked-by: Michal Hocko <mhocko@xxxxxxxx>
> Tested-by: Masato Suzuki <masato.suzuki@xxxxxxx>
> Reviewed-by: Damien Le Moal <damien.lemoal@xxxxxxx>

I suppose this patch should be routed through MM tree, so, CCing Andrew.

>
> ---
>
> V4:
> - Fix PR_GET_IO_FLUSHER check to match SET.
>
> V3:
> - Drop NOFS, set PF_LESS_THROTTLE and rename prctl flag to reflect it
> is more general and can support both FS and block devices. Both fuse
> and block device daemons, nbd and tcmu-runner, have been tested to
> confirm the more restrictive PF_MEMALLOC_NOIO also works for fuse.
>
> - Use CAP_SYS_RESOURCE instead of admin.
>
> V2:
> - Use prctl instead of procfs.
> - Add support for NOFS for fuse.
> - Check permissions.
>
>
>  include/uapi/linux/capability.h |  1 +
>  include/uapi/linux/prctl.h      |  4 ++++
>  kernel/sys.c                    | 25 +++++++++++++++++++++++++
>  3 files changed, 30 insertions(+)
>
> diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
> index 240fdb9a60f6..272dc69fa080 100644
> --- a/include/uapi/linux/capability.h
> +++ b/include/uapi/linux/capability.h
> @@ -301,6 +301,7 @@ struct vfs_ns_cap_data {
>  /* Allow more than 64hz interrupts from the real-time clock */
>  /* Override max number of consoles on console allocation */
>  /* Override max number of keymaps */
> +/* Control memory reclaim behavior */
>
>  #define CAP_SYS_RESOURCE     24
>
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index 7da1b37b27aa..07b4f8131e36 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -234,4 +234,8 @@ struct prctl_mm_map {
>  #define PR_GET_TAGGED_ADDR_CTRL                56
>  # define PR_TAGGED_ADDR_ENABLE         (1UL << 0)
>
> +/* Control reclaim behavior when allocating memory */
> +#define PR_SET_IO_FLUSHER              57
> +#define PR_GET_IO_FLUSHER              58
> +
>  #endif /* _LINUX_PRCTL_H */
> diff --git a/kernel/sys.c b/kernel/sys.c
> index a611d1d58c7d..c1a360370d09 100644
> --- a/kernel/sys.c
> +++ b/kernel/sys.c
> @@ -2259,6 +2259,8 @@ int __weak arch_prctl_spec_ctrl_set(struct task_struct *t, unsigned long which,
>         return -EINVAL;
>  }
>
> +#define PR_IO_FLUSHER (PF_MEMALLOC_NOIO | PF_LESS_THROTTLE)
> +
>  SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
>                 unsigned long, arg4, unsigned long, arg5)
>  {
> @@ -2486,6 +2488,29 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
>                         return -EINVAL;
>                 error = GET_TAGGED_ADDR_CTRL();
>                 break;
> +       case PR_SET_IO_FLUSHER:
> +               if (!capable(CAP_SYS_RESOURCE))
> +                       return -EPERM;
> +
> +               if (arg3 || arg4 || arg5)
> +                       return -EINVAL;
> +
> +               if (arg2 == 1)
> +                       current->flags |= PR_IO_FLUSHER;
> +               else if (!arg2)
> +                       current->flags &= ~PR_IO_FLUSHER;
> +               else
> +                       return -EINVAL;
> +               break;
> +       case PR_GET_IO_FLUSHER:
> +               if (!capable(CAP_SYS_RESOURCE))
> +                       return -EPERM;
> +
> +               if (arg2 || arg3 || arg4 || arg5)
> +                       return -EINVAL;
> +
> +               error = (current->flags & PR_IO_FLUSHER) == PR_IO_FLUSHER;
> +               break;
>         default:
>                 error = -EINVAL;
>                 break;
> --
> 2.20.1
>



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux