Re: Splice & iomap dio problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 19, 2019 at 05:32:14PM +0100, Jan Kara wrote:
> On Wed 13-11-19 10:44:03, Darrick J. Wong wrote:
> > On Wed, Nov 13, 2019 at 07:00:32PM +0100, Jan Kara wrote:
> > > Hello,
> > > 
> > > I've spent today tracking down the syzkaller report of a WARN_ON hit in
> > > iov_iter_pipe() [1]. The immediate problem is that syzkaller reproducer
> > > (calling sendfile(2) from different threads at the same time a file to the
> > > same file in rather evil way) results in splice code leaking pipe pages
> > > (nrbufs doesn't return to 0 after read+write in the splice) and eventually
> > > we run out of pipe pages and hit the warning in iov_iter_pipe(). The
> > > problem is not specific to ext4, I can see in my tracing that when the
> > > underlying filesystem is XFS, we can leak the pipe pages in the same way
> > > (but for XFS somehow the problem doesn't happen as often).  Rather the
> > > problem seems to be in how iomap direct IO code, pipe iter code, and splice
> > > code interact.
> > > 
> > > So the problematic situation is when we do direct IO read into pipe pages
> > > and the read hits EOF which is not on page boundary. Say the file has 4608
> > > (4096+512) bytes, block size == page size == 4096. What happens is that iomap
> > > code maps the extent, gets that the extent size is 8192 (mapping ignores
> > 
> > I wonder, would this work properly if the read side returns a 4608-byte
> > mapping instead of an 8192-byte mapping?  It doesn't make a lot of sense
> > (to me, anyway) for a read mapping to go beyond EOF.
> 
> The slight concern I have with this is that that would change e.g. the
> behavior of IOMAP_REPORT. We could specialcase IOMAP_REPORT but then it
> gets kind of ugly. And it seems kind of fuzzy when do we truncate the
> extent with i_size and when not... Generally i_size is kind of a side-band
> thing for block mapping operations so if we could leave it out of
> ->iomap_begin I'd find that nicer.

<nod>

> > > i_size). Then we call iomap_dio_bio_actor(), which creates its private
> > > iter, truncates it to 8192, and calls bio_iov_iter_get_pages(). That
> > > eventually results in preparing two pipe buffers with length 4096 to accept
> > > the read. Then read completes, in iomap_dio_complete() we truncate the return
> > > value from 8192 (which was the real amount of IO we performed) to 4608. Now
> > > this amount (4608) gets passed through splice code to
> > > iter_file_splice_write(), we write out that amount, but then when cleaning
> > > up pipe buffers, the last pipe buffer has still 3584 unused so we leave
> > > the pipe buffer allocated and effectively leak it.
> > > 
> > > Now I was also investigating why the old direct IO code doesn't leak pipe
> > > buffers like this and the trick is done by the iov_iter_revert() call
> > > generic_file_read_iter(). This results in setting iter position right to
> > > the position where direct IO read reported it ended (4608) and truncating
> > > pipe buffers after this point. So splice code then sees the second pipe
> > > buffer has length only 512 which matches the amount it was asked to write
> > > and so the pipe buffer gets freed after the write in
> > > iter_file_splice_write().
> > > 
> > > The question is how to best fix this. The quick fix is to add
> > > iov_iter_revert() call to iomap_dio_rw() so that in case of sync IO (we
> > > always do only sync IO to pipes), we properly set iter position in case of
> > > short read / write. But it looks somewhat hacky to me and this whole
> > > interaction of iter and pipes looks fragile to me.
> > > 
> > > Another option I can see is to truncate the iter to min(i_size-pos, length) in
> > > iomap_dio_bio_actor() which *should* do the trick AFAICT. But I'm not sure
> > > if it won't break something else.
> > 
> > Do the truncation in ->iomap_begin on the read side, as I suggested above?
> 
> Yes, that would be equivalent for this case.
> 
> > > Any other ideas?
> > > 
> > > As a side note the logic copying iter in iomap_dio_bio_actor() looks
> > > suspicious. We copy 'dio->submit.iter' to 'iter' but then in the loop we call
> > > iov_iter_advance() on dio->submit.iter. So if bio_iov_iter_get_pages()
> > > didn't return enough pages and we loop again, 'iter' will have stale
> > > contents and things go sideways from there? What am I missing? And why do
> > > we do that strange copying of iter instead of using iov_iter_truncate() and
> > > iov_iter_reexpand() on the 'dio->submit.iter' directly?
> > 
> > I'm similarly puzzled; I would've thought that we'd need to advance the
> > private @iter too.  Or just truncate and reexpand the dio->submit.iter
> > and not have the private one.
> > 
> > With any luck hch will have some ideas? :/
> 
> Christoph seems to be busy with something else. So I'll just write patches,
> run them through fstests and see if something blows up.

Heheh.  Ok, sounds good!

--D

> 								Honza
> -- 
> Jan Kara <jack@xxxxxxxx>
> SUSE Labs, CR



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux