[RFC PATCH 00/14] pipe: Keyrings, Block and USB notifications [ver #2]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here's a set of patches to add a general notification queue concept and to
add event sources such as:

 (1) Keys/keyrings, such as linking and unlinking keys and changing their
     attributes.

 (2) General device events (single common queue) including:

     - Block layer events, such as device errors

     - USB subsystem events, such as device attach/remove, device reset,
       device errors.

I have patches for adding superblock and mount topology watches also,
though those are not in this set as there are other dependencies.

LSM hooks are included:

 (1) A set of hooks are provided that allow an LSM to rule on whether or
     not a watch may be set.  Each of these hooks takes a different
     "watched object" parameter, so they're not really shareable.  The LSM
     should use current's credentials.  [Wanted by SELinux & Smack]

 (2) A hook is provided to allow an LSM to rule on whether or not a
     particular message may be posted to a particular queue.  This is given
     the credentials from the event generator (which may be the system) and
     the watch setter.  [Wanted by Smack]

I've provided SELinux and Smack with implementations of some of these hooks.


Design decisions:

 (1) The notification queue is built on top of a standard pipe.  Messages
     are effectively spliced in.  The pipe is opened with a special flag:

	pipe2(fds, O_NOTIFICATION_PIPE);

     The special flag has the same value as O_EXCL (which doesn't seem like
     it will ever be applicable in this context)[?].  It is given up front
     to make it a lot easier to prohibit splice and co. from accessing the
     pipe.

     [?] Should this be done some other way?  I'd rather not use up a new
     O_* flag if I can avoid it - should I add a pipe3() system call
     instead?

     The pipe is then configured::

	ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
	ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);

     Messages are then read out of the pipe using read().

 (2) It should be possible to allow write() to insert data into the
     notification pipes too, but this is currently disabled as the kernel
     has to be able to insert messages into the pipe *without* holding
     pipe->mutex and the code to make this work needs careful auditing.

 (3) sendfile(), splice() and vmsplice() are disabled on notification pipes
     because of the pipe->mutex issue and also because they sometimes want
     to revert what they just did - but one or more notification messages
     might've been interleaved in the ring.

 (4) The kernel inserts messages with the wait queue spinlock held.  This
     means that pipe_read() and pipe_write() have to take the spinlock to
     update the queue pointers.

 (5) Records in the buffer are binary, typed and have a length so that they
     can be of varying size.

     This allows multiple heterogeneous sources to share a common buffer;
     there are 16 million types available, of which I've used just a few,
     so there is scope for others to be used.  Tags may be specified when a
     watchpoint is created to help distinguish the sources.

 (6) Records are filterable as types have up to 256 subtypes that can be
     individually filtered.  Other filtration is also available.

 (7) Notification pipes don't interfere with each other; each may be bound
     to a different set of watches.  Any particular notification will be
     copied to all the queues that are currently watching for it - and only
     those that are watching for it.

 (8) When recording a notification, the kernel will not sleep, but will
     rather mark a queue as having lost a message if there's insufficient
     space.  read() will fabricate a loss notification message at an
     appropriate point later.

 (9) The notification pipe is created and then watchpoints are attached to
     it, using one of:

	keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
	watch_devices(fds[1], 0x02, 0);

     where in both cases, fd indicates the queue and the number after is a
     tag between 0 and 255.

(10) Watches are removed if either the notification pipe is destroyed or
     the watched object is destroyed.  In the latter case, a message will
     be generated indicating the enforced watch removal.


Things I want to avoid:

 (1) Introducing features that make the core VFS dependent on the network
     stack or networking namespaces (ie. usage of netlink).

 (2) Dumping all this stuff into dmesg and having a daemon that sits there
     parsing the output and distributing it as this then puts the
     responsibility for security into userspace and makes handling
     namespaces tricky.  Further, dmesg might not exist or might be
     inaccessible inside a container.

 (3) Letting users see events they shouldn't be able to see.


Testing and manpages:

 (*) The keyutils tree has a pipe-watch branch that has keyctl commands for
     making use of notifications.  Proposed manual pages can also be found
     on this branch, though a couple of them really need to go to the main
     manpages repository instead.

     If the kernel supports the watching of keys, then running "make test"
     on that branch will cause the testing infrastructure to spawn a
     monitoring process on the side that monitors a notifications pipe for
     all the key/keyring changes induced by the tests and they'll all be
     checked off to make sure they happened.

	https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch

The kernel patches can also be found here:

	https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git/log/?h=notifications-pipe-core

Changes:

 ver #2:

 (*) Declare O_NOTIFICATION_PIPE to use and switch it to be the same value
     as O_EXCL rather then O_TMPFILE (the latter is a bit nasty in its
     implementation).

 ver #1:

 (*) Build on top of standard pipes instead of having a driver.

David
---
David Howells (14):
      uapi: General notification queue definitions
      security: Add hooks to rule on setting a watch
      security: Add a hook for the point of notification insertion
      pipe: Add O_NOTIFICATION_PIPE
      pipe: Add general notification queue support
      keys: Add a notification facility
      Add sample notification program
      pipe: Allow buffers to be marked read-whole-or-error for notifications
      pipe: Add notification lossage handling
      Add a general, global device notification watch list
      block: Add block layer notifications
      usb: Add USB subsystem notifications
      selinux: Implement the watch_key security hook
      smack: Implement the watch_key and post_notification hooks


 Documentation/ioctl/ioctl-number.rst        |    1 
 Documentation/security/keys/core.rst        |   58 ++
 Documentation/watch_queue.rst               |  385 ++++++++++++++++
 arch/alpha/kernel/syscalls/syscall.tbl      |    1 
 arch/arm/tools/syscall.tbl                  |    1 
 arch/arm64/include/asm/unistd.h             |    2 
 arch/arm64/include/asm/unistd32.h           |    2 
 arch/ia64/kernel/syscalls/syscall.tbl       |    1 
 arch/m68k/kernel/syscalls/syscall.tbl       |    1 
 arch/microblaze/kernel/syscalls/syscall.tbl |    1 
 arch/mips/kernel/syscalls/syscall_n32.tbl   |    1 
 arch/mips/kernel/syscalls/syscall_n64.tbl   |    1 
 arch/mips/kernel/syscalls/syscall_o32.tbl   |    1 
 arch/parisc/kernel/syscalls/syscall.tbl     |    1 
 arch/powerpc/kernel/syscalls/syscall.tbl    |    1 
 arch/s390/kernel/syscalls/syscall.tbl       |    1 
 arch/sh/kernel/syscalls/syscall.tbl         |    1 
 arch/sparc/kernel/syscalls/syscall.tbl      |    1 
 arch/x86/entry/syscalls/syscall_32.tbl      |    1 
 arch/x86/entry/syscalls/syscall_64.tbl      |    1 
 arch/xtensa/kernel/syscalls/syscall.tbl     |    1 
 block/Kconfig                               |    9 
 block/blk-core.c                            |   29 +
 drivers/base/Kconfig                        |    9 
 drivers/base/Makefile                       |    1 
 drivers/base/watch.c                        |   90 ++++
 drivers/usb/core/Kconfig                    |    9 
 drivers/usb/core/devio.c                    |   47 ++
 drivers/usb/core/hub.c                      |    4 
 fs/pipe.c                                   |  229 ++++++---
 fs/splice.c                                 |   12 
 include/linux/blkdev.h                      |   15 +
 include/linux/device.h                      |    7 
 include/linux/key.h                         |    3 
 include/linux/lsm_audit.h                   |    1 
 include/linux/lsm_hooks.h                   |   38 ++
 include/linux/pipe_fs_i.h                   |   27 +
 include/linux/security.h                    |   32 +
 include/linux/syscalls.h                    |    1 
 include/linux/usb.h                         |   18 +
 include/linux/watch_queue.h                 |  127 +++++
 include/uapi/asm-generic/unistd.h           |    4 
 include/uapi/linux/keyctl.h                 |    2 
 include/uapi/linux/watch_queue.h            |  158 ++++++
 init/Kconfig                                |   12 
 kernel/Makefile                             |    1 
 kernel/sys_ni.c                             |    1 
 kernel/watch_queue.c                        |  658 +++++++++++++++++++++++++++
 samples/Kconfig                             |    7 
 samples/Makefile                            |    1 
 samples/watch_queue/Makefile                |    7 
 samples/watch_queue/watch_test.c            |  251 ++++++++++
 security/keys/Kconfig                       |    9 
 security/keys/compat.c                      |    3 
 security/keys/gc.c                          |    5 
 security/keys/internal.h                    |   30 +
 security/keys/key.c                         |   38 +-
 security/keys/keyctl.c                      |   99 ++++
 security/keys/keyring.c                     |   20 +
 security/keys/request_key.c                 |    4 
 security/security.c                         |   23 +
 security/selinux/hooks.c                    |   14 +
 security/smack/smack_lsm.c                  |   82 +++
 63 files changed, 2492 insertions(+), 109 deletions(-)
 create mode 100644 Documentation/watch_queue.rst
 create mode 100644 drivers/base/watch.c
 create mode 100644 include/linux/watch_queue.h
 create mode 100644 include/uapi/linux/watch_queue.h
 create mode 100644 kernel/watch_queue.c
 create mode 100644 samples/watch_queue/Makefile
 create mode 100644 samples/watch_queue/watch_test.c





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux