On Wed, Oct 09, 2019 at 02:21:00PM +1100, Dave Chinner wrote:
> From: Dave Chinner <dchinner@xxxxxxxxxx>
>
> In certain situations the background CIL push can be indefinitely
> delayed. While we have workarounds from the obvious cases now, it
> doesn't solve the underlying issue. This issue is that there is no
> upper limit on the CIL where we will either force or wait for
> a background push to start, hence allowing the CIL to grow without
> bound until it consumes all log space.
>
> To fix this, add a new wait queue to the CIL which allows background
> pushes to wait for the CIL context to be switched out. This happens
> when the push starts, so it will allow us to block incoming
> transaction commit completion until the push has started. This will
> only affect processes that are running modifications, and only when
> the CIL threshold has been significantly overrun.
>
> This has no apparent impact on performance, and doesn't even trigger
> until over 45 million inodes had been created in a 16-way fsmark
> test on a 2GB log. That was limiting at 64MB of log space used, so
> the active CIL size is only about 3% of the total log in that case.
> The concurrent removal of those files did not trigger the background
> sleep at all.
>
> Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
> ---
This looks the same as the previous version.
Brian
> fs/xfs/xfs_log_cil.c | 37 +++++++++++++++++++++++++++++++++----
> fs/xfs/xfs_log_priv.h | 24 ++++++++++++++++++++++++
> fs/xfs/xfs_trace.h | 1 +
> 3 files changed, 58 insertions(+), 4 deletions(-)
>
> diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
> index ef652abd112c..4a09d50e1368 100644
> --- a/fs/xfs/xfs_log_cil.c
> +++ b/fs/xfs/xfs_log_cil.c
> @@ -670,6 +670,11 @@ xlog_cil_push(
> push_seq = cil->xc_push_seq;
> ASSERT(push_seq <= ctx->sequence);
>
> + /*
> + * Wake up any background push waiters now this context is being pushed.
> + */
> + wake_up_all(&ctx->push_wait);
> +
> /*
> * Check if we've anything to push. If there is nothing, then we don't
> * move on to a new sequence number and so we have to be able to push
> @@ -746,6 +751,7 @@ xlog_cil_push(
> */
> INIT_LIST_HEAD(&new_ctx->committing);
> INIT_LIST_HEAD(&new_ctx->busy_extents);
> + init_waitqueue_head(&new_ctx->push_wait);
> new_ctx->sequence = ctx->sequence + 1;
> new_ctx->cil = cil;
> cil->xc_ctx = new_ctx;
> @@ -900,7 +906,7 @@ xlog_cil_push_work(
> */
> static void
> xlog_cil_push_background(
> - struct xlog *log)
> + struct xlog *log) __releases(cil->xc_ctx_lock)
> {
> struct xfs_cil *cil = log->l_cilp;
>
> @@ -914,14 +920,36 @@ xlog_cil_push_background(
> * don't do a background push if we haven't used up all the
> * space available yet.
> */
> - if (cil->xc_ctx->space_used < XLOG_CIL_SPACE_LIMIT(log))
> + if (cil->xc_ctx->space_used < XLOG_CIL_SPACE_LIMIT(log)) {
> + up_read(&cil->xc_ctx_lock);
> return;
> + }
>
> spin_lock(&cil->xc_push_lock);
> if (cil->xc_push_seq < cil->xc_current_sequence) {
> cil->xc_push_seq = cil->xc_current_sequence;
> queue_work(log->l_mp->m_cil_workqueue, &cil->xc_push_work);
> }
> +
> + /*
> + * Drop the context lock now, we can't hold that if we need to sleep
> + * because we are over the blocking threshold. The push_lock is still
> + * held, so blocking threshold sleep/wakeup is still correctly
> + * serialised here.
> + */
> + up_read(&cil->xc_ctx_lock);
> +
> + /*
> + * If we are well over the space limit, throttle the work that is being
> + * done until the push work on this context has begun.
> + */
> + if (cil->xc_ctx->space_used >= XLOG_CIL_BLOCKING_SPACE_LIMIT(log)) {
> + trace_xfs_log_cil_wait(log, cil->xc_ctx->ticket);
> + ASSERT(cil->xc_ctx->space_used < log->l_logsize);
> + xlog_wait(&cil->xc_ctx->push_wait, &cil->xc_push_lock);
> + return;
> + }
> +
> spin_unlock(&cil->xc_push_lock);
>
> }
> @@ -1038,9 +1066,9 @@ xfs_log_commit_cil(
> if (lip->li_ops->iop_committing)
> lip->li_ops->iop_committing(lip, xc_commit_lsn);
> }
> - xlog_cil_push_background(log);
>
> - up_read(&cil->xc_ctx_lock);
> + /* xlog_cil_push_background() releases cil->xc_ctx_lock */
> + xlog_cil_push_background(log);
> }
>
> /*
> @@ -1199,6 +1227,7 @@ xlog_cil_init(
>
> INIT_LIST_HEAD(&ctx->committing);
> INIT_LIST_HEAD(&ctx->busy_extents);
> + init_waitqueue_head(&ctx->push_wait);
> ctx->sequence = 1;
> ctx->cil = cil;
> cil->xc_ctx = ctx;
> diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
> index a3cc8a9a16d9..f231b7dfaeab 100644
> --- a/fs/xfs/xfs_log_priv.h
> +++ b/fs/xfs/xfs_log_priv.h
> @@ -247,6 +247,7 @@ struct xfs_cil_ctx {
> struct xfs_log_vec *lv_chain; /* logvecs being pushed */
> struct list_head iclog_entry;
> struct list_head committing; /* ctx committing list */
> + wait_queue_head_t push_wait; /* background push throttle */
> struct work_struct discard_endio_work;
> };
>
> @@ -344,10 +345,33 @@ struct xfs_cil {
> * buffer window (32MB) as measurements have shown this to be roughly the
> * point of diminishing performance increases under highly concurrent
> * modification workloads.
> + *
> + * To prevent the CIL from overflowing upper commit size bounds, we introduce a
> + * new threshold at which we block committing transactions until the background
> + * CIL commit commences and switches to a new context. While this is not a hard
> + * limit, it forces the process committing a transaction to the CIL to block and
> + * yeild the CPU, giving the CIL push work a chance to be scheduled and start
> + * work. This prevents a process running lots of transactions from overfilling
> + * the CIL because it is not yielding the CPU. We set the blocking limit at
> + * twice the background push space threshold so we keep in line with the AIL
> + * push thresholds.
> + *
> + * Note: this is not a -hard- limit as blocking is applied after the transaction
> + * is inserted into the CIL and the push has been triggered. It is largely a
> + * throttling mechanism that allows the CIL push to be scheduled and run. A hard
> + * limit will be difficult to implement without introducing global serialisation
> + * in the CIL commit fast path, and it's not at all clear that we actually need
> + * such hard limits given the ~7 years we've run without a hard limit before
> + * finding the first situation where a checkpoint size overflow actually
> + * occurred. Hence the simple throttle, and an ASSERT check to tell us that
> + * we've overrun the max size.
> */
> #define XLOG_CIL_SPACE_LIMIT(log) \
> min_t(int, (log)->l_logsize >> 3, BBTOB(XLOG_TOTAL_REC_SHIFT(log)) << 4)
>
> +#define XLOG_CIL_BLOCKING_SPACE_LIMIT(log) \
> + (XLOG_CIL_SPACE_LIMIT(log) * 2)
> +
> /*
> * ticket grant locks, queues and accounting have their own cachlines
> * as these are quite hot and can be operated on concurrently.
> diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
> index eaae275ed430..e7087ede2662 100644
> --- a/fs/xfs/xfs_trace.h
> +++ b/fs/xfs/xfs_trace.h
> @@ -1011,6 +1011,7 @@ DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_sub);
> DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_enter);
> DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_exit);
> DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_sub);
> +DEFINE_LOGGRANT_EVENT(xfs_log_cil_wait);
>
> DECLARE_EVENT_CLASS(xfs_log_item_class,
> TP_PROTO(struct xfs_log_item *lip),
> --
> 2.23.0.rc1
>
