Re: dd hangs when reading large partitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 18, 2019 at 8:11 PM Marc Gonzalez <marc.w.gonzalez@xxxxxxx> wrote:
>
> Hello,
>
> I'm running into an issue which I don't know how to debug.
> So I'm open to ideas and suggestions :-)
>
> On my arm64 board, I have enabled Universal Flash Storage support.
>
> I wanted to benchmark read performance, and noticed that the system
> locks up when I read partitions larger than 3.5 GB, unless I tell
> dd to use direct IO:
>
> *** WITH O_DIRECT ***
> # dd if=/dev/sda of=/dev/null bs=1M iflag=direct status=progress
> 57892929536 bytes (58 GB, 54 GiB) copied, 697.006 s, 83.1 MB/s
> 55256+0 records in
> 55256+0 records out
> 57940115456 bytes (58 GB, 54 GiB) copied, 697.575 s, 83.1 MB/s
>
> *** WITHOUT O_DIRECT ***
> # dd if=/dev/sda of=/dev/null bs=1M status=progress
> 3853516800 bytes (3.9 GB, 3.6 GiB) copied, 49.0002 s, 78.6 MB/s
>
>
> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> rcu:    1-...0: (8242 ticks this GP) idle=106/1/0x4000000000000000 softirq=168/171 fqs=2626
> rcu:    6-...0: (99 GPs behind) idle=ec2/1/0x4000000000000000 softirq=71/71 fqs=2626
> rcu:    (detected by 7, t=5254 jiffies, g=-275, q=2)
> Task dump for CPU 1:
> kworker/1:1H    R  running task        0   675      2 0x0000002a
> Workqueue: kblockd blk_mq_run_work_fn
> Call trace:
>  __switch_to+0x168/0x1d0
>  0xffffffc0f6efbbc8
>  blk_mq_run_work_fn+0x28/0x40
>  process_one_work+0x208/0x470
>  worker_thread+0x48/0x460
>  kthread+0x128/0x130
>  ret_from_fork+0x10/0x1c
> Task dump for CPU 6:
> kthreadd        R  running task        0     2      0 0x0000002a
> Call trace:
>  __switch_to+0x168/0x1d0
>  0x5b36396f4e7d4000
>
>
> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> rcu:    1-...0: (8242 ticks this GP) idle=106/1/0x4000000000000000 softirq=168/171 fqs=10500
> rcu:    6-...0: (99 GPs behind) idle=ec2/1/0x4000000000000000 softirq=71/71 fqs=10500
> rcu:    (detected by 7, t=21009 jiffies, g=-275, q=2)
> Task dump for CPU 1:
> kworker/1:1H    R  running task        0   675      2 0x0000002a
> Workqueue: kblockd blk_mq_run_work_fn
> Call trace:
>  __switch_to+0x168/0x1d0
>  0xffffffc0f6efbbc8
>  blk_mq_run_work_fn+0x28/0x40
>  process_one_work+0x208/0x470
>  worker_thread+0x48/0x460
>  kthread+0x128/0x130
>  ret_from_fork+0x10/0x1c
> Task dump for CPU 6:
> kthreadd        R  running task        0     2      0 0x0000002a
> Call trace:
>  __switch_to+0x168/0x1d0
>  0x5b36396f4e7d4000
>
>
> The system always hangs around the 3.6 GiB mark, wherever I start from.
> How can I debug this issue?

Maybe you can try to collect debugfs log first via the following command?

(cd /sys/kernel/debug/block/sda && find . -type f -exec grep -aH . {} \;)

BTW,  I have several questions on this report:

- what is the kernel version in your test?
- can you reproduce this issue on other disk(not UFS)?
- are there any tasks in 'D' state shown via 'ps -ax'? If yes, please dump their
stack trace.

Thanks,
Ming Lei



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux