Re: [PATCH] proc: allow killing processes via file descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Nov 18, 2018 at 10:07:31AM -0800, Daniel Colascione wrote:
> On Sun, Nov 18, 2018 at 9:41 AM, Christian Brauner <christian@xxxxxxxxxx> wrote:
> > On Sun, Nov 18, 2018 at 07:38:09AM -0800, Andy Lutomirski wrote:
> >> On Sun, Nov 18, 2018 at 5:59 AM Daniel Colascione <dancol@xxxxxxxxxx> wrote:
> >> >
> >> > I had been led to believe that the proposal would be a comprehensive
> >> > process API, not an ioctl basically equivalent to my previous patch.
> >> > If you had a more comprehensive proposal, please just share it on LKML
> >> > instead of limiting the discussion to those able to attend these
> >> > various conferences. If there's some determined opposition to a
> >> > general new process API, this opposition needs a fair and full airing,
> >> > as not everyone can attend these conferences.
> >> >
> >> > On Sun, Nov 18, 2018 at 3:17 AM, Christian Brauner <christian@xxxxxxxxxx> wrote:
> >> > > With this patch an open() call on /proc/<pid> will give userspace a handle
> >> > > to struct pid of the process associated with /proc/<pid>. This allows to
> >> > > maintain a stable handle on a process.
> >> > > I have been discussing various approaches extensively during technical
> >> > > conferences this year culminating in a long argument with Eric at Linux
> >> > > Plumbers. The general consensus was that having a handle on a process
> >> > > will be something that is very simple and easy to maintain
> >> >
> >> > ioctls are the opposite of "easy to maintain". Their
> >> > file-descriptor-specific behavior makes it difficult to use the things
> >> > safely. If you want to take this approach, please make a new system
> >> > call. An ioctl is just a system call with a very strange spelling and
> >> > unfortunate collision semantics.
> >> >
> >> > > with the
> >> > > option of being extensible via a more advanced api if the need arises.
> >> >
> >> > The need *has* arisen; see my exithand patch.
> >> >
> >> > > I
> >> > > believe that this patch is the most simple, dumb, and therefore
> >> > > maintainable solution.
> >> > >
> >> > > The need for this has arisen in order to reliably kill a process without
> >> > > running into issues of the pid being recycled as has been described in the
> >> > > rejected patch [1].
> >> >
> >> > That patch was not "rejected". It was tabled pending the more
> >> > comprehensive process API proposal that was supposed to have emerged.
> >> > This patch is just another variant of the sort of approach we
> >> > discussed on that patch's thread here. As I mentioned on that thread,
> >> > the right approach option is a new system call, not an ioctl.
> >> >
> >> >  To fulfill the need described in that patchset a new
> >> > > ioctl() PROC_FD_SIGNAL is added. It can be used to send signals to a
> >> > > process via a file descriptor:
> >> > >
> >> > > int fd = open("/proc/1234", O_DIRECTORY | O_CLOEXEC);
> >> > > ioctl(fd, PROC_FD_SIGNAL, SIGKILL);
> >> > > close(fd);
> >> > >
> >> > > Note, the stable handle will allow us to carefully extend this feature in
> >> > > the future.
> >> >
> >> > We still need the ability to synchronously wait on a process's death,
> >> > as in my patch set. I will be refreshing that patch set.
> >>
> >> I fully agree that a more comprehensive, less expensive API for
> >> managing processes would be nice.  But I also think that this patch
> >> (using the directory fd and ioctl) is better from a security
> >> perspective than using a new file in /proc.
> >>
> >> I have an old patch to make proc directory fds pollable:
> >>
> >> https://lore.kernel.org/patchwork/patch/345098/
> >>
> >> That patch plus the one in this thread might make a nice addition to
> >> the kernel even if we expect something much better to come along
> >> later.
> >
> > I agree. Eric's point was to make the first implementation of this as
> > simple as possible that's why this patch is intentionally almost
> > trivial. And I like it for its simplicity.
> >
> > I had a more comprehensive API proposal of which open(/proc/<pid>) was a
> > part. I didn't send out alongside this patch as Eric clearly prefered to
> > only have the /proc/<pid> part. Here is the full proposal as I intended
> > to originally send it out:
> 
> Thanks.
> 
> > The gist is to have file descriptors for processes which is obviously not a new
> > idea. This has been done before in other OSes and it has been tried before in
> > Linux [2], [3] (Thanks to Kees for pointing out these patches.). So I want to
> > make it very clear that I'm not laying claim to this being my or even a novel
> > idea in any way. However, I want to diverge from previous approaches with my
> > suggestion. (Though I can't be sure that there's not something similar in other
> > OSes already.)
> 
> Windows works basically as you describe. You can create a process is
> suspended state, configure it however you want, then let it run.
> CreateProcess (and even moreso, NtCreateProcess) also provide a rich
> (and *extensible*) interface for pre-creation process configuration.
> 
> >> One of the main motivations for having procfds is to have a race-free way of
> > configuring, starting, polling, and killing a process. Basically, a process
> > lifecycle api if you want to think about it that way. The api should also be
> > easily extendable in the future to avoid running into the limitations we
> > currently see with the clone*() syscall(s) again.
> >
> > One of the crucial points of the api is to *separate the configuration
> > of a process through a procfd from actually creating the process*.
> > This is a crucial property expressed in the open*() system calls. First, get a
> > stable handle on an object then allow for ways to configure it. As such the
> > procfd api shares the same insight with Al's and David's new mount api.
> > (Fwiw, Andy also pointed out similarities with posix_spawn().)
> > What I envisioned was to have the following syscalls (multiple name suggestions):
> >
> > 1. int process_open / proc_open / procopen
> > 2. int process_config / proc_config / procconfig or ioctl()-based
> > 3. int process_info / proc_info / procinfo or ioctl()-based
> > 4. int process_manage / proc_manage / procmanage or ioctl()-based
> 
> The API you've proposed seems fine to me, although I'd either 1)
> consolidate operations further into one system call, or 2) separate
> the different management operations into more and different system
> calls that can be audited independently. The grouping you've proposed
> seems to have the worst aspects of API splitting and API multiplexing.
> But I have no objection to it in spirit.
> 
> That said, while I do want to fix process configuration and startup
> generally, I want to fix specific holes in the existing API surface
> first. The two patches I've already sent do that, and this work
> shouldn't wait on an ideal larger process-API overhaul that may or may
> not arrive. Based on previous history, I suspect that an API of the
> scope you're proposing would take years to overcome all LKML
> objections and land. I don't want to wait that long when we can make
> smaller fixes that would not conflict with the general architecture.
> 
> The original patch on this thread is half of the right fix. While I
> think we should use a system call instead of an ioctl, and while I
> have some specific implementation critiques (which I described in a
> different message), it's the right general sort of thing. We should
> merge it.

Thanks. I agree. Note, I don't care if it's an ioctl() or not. I'm happy
to instead add a syscall process_signal() alongside this patchset. What
do people prefer?

> 
> Next, I want to merge my exithand proposal, or something like it. It's
> likewise a simple change that, in a minimal way, addresses a
> longstanding API deficiency. I'm very strongly against the
> POLLERR-on-directory variant of the idea.



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux