Re: [PATCH v4 01/11] VFS: move cross device copy_file_range() check into filesystems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Looks fine to me - will relax the semantics in followon patch for
cifs.ko (to allow for cases where we can support it) as soon as this
is in.

Reviewed-by: Steve French <stfrench@xxxxxxxxxxxxx>
On Fri, Oct 26, 2018 at 3:11 PM Olga Kornievskaia
<olga.kornievskaia@xxxxxxxxx> wrote:
>
> From: Olga Kornievskaia <kolga@xxxxxxxxxx>
>
> This patch makes it the responsibility of individual filesystems to
> allow or deny cross device copies.  Both NFS and CIFS have operations
> for cross-server copies, and later patches will implement this feature.
>
> Note that as of this patch, the copy_file_range() function might be passed
> superblocks from different filesystem types. -EXDEV should be returned
> if cross device copies aren't supported, causing the VFS to fall back
> on using do_splice_direct().
>
> Signed-off-by: Olga Kornievskaia <kolga@xxxxxxxxxx>
> ---
>  Documentation/filesystems/porting | 7 +++++++
>  fs/cifs/cifsfs.c                  | 3 +++
>  fs/nfs/nfs4file.c                 | 3 +++
>  fs/overlayfs/file.c               | 3 +++
>  fs/read_write.c                   | 9 +++------
>  5 files changed, 19 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
> index 7b7b845..897e1e7 100644
> --- a/Documentation/filesystems/porting
> +++ b/Documentation/filesystems/porting
> @@ -622,3 +622,10 @@ in your dentry operations instead.
>         alloc_file_clone(file, flags, ops) does not affect any caller's references.
>         On success you get a new struct file sharing the mount/dentry with the
>         original, on failure - ERR_PTR().
> +--
> +[mandatory]
> +       ->copy_file_range() may now be passed files which belong to two
> +       different superblocks of the same file system type or which belong
> +       to two different filesystems types all together. As before, the
> +       destination's copy_file_range() is the function which is called.
> +       If it cannot copy ranges from the source, it should return -EXDEV.
> diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
> index 7065426..f2d7f4f 100644
> --- a/fs/cifs/cifsfs.c
> +++ b/fs/cifs/cifsfs.c
> @@ -1114,6 +1114,9 @@ static ssize_t cifs_copy_file_range(struct file *src_file, loff_t off,
>         unsigned int xid = get_xid();
>         ssize_t rc;
>
> +       if (src_file->f_inode->i_sb != dst_file->f_inode->i_sb)
> +               return -EXDEV;
> +
>         rc = cifs_file_copychunk_range(xid, src_file, off, dst_file, destoff,
>                                         len, flags);
>         free_xid(xid);
> diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
> index 4288a6e..09df688 100644
> --- a/fs/nfs/nfs4file.c
> +++ b/fs/nfs/nfs4file.c
> @@ -135,6 +135,9 @@ static ssize_t nfs4_copy_file_range(struct file *file_in, loff_t pos_in,
>  {
>         ssize_t ret;
>
> +       if (file_in->f_inode->i_sb != file_out->f_inode->i_sb)
> +               return -EXDEV;
> +
>         if (file_inode(file_in) == file_inode(file_out))
>                 return -EINVAL;
>  retry:
> diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
> index aeaefd2..5282853 100644
> --- a/fs/overlayfs/file.c
> +++ b/fs/overlayfs/file.c
> @@ -483,6 +483,9 @@ static ssize_t ovl_copy_file_range(struct file *file_in, loff_t pos_in,
>                                    struct file *file_out, loff_t pos_out,
>                                    size_t len, unsigned int flags)
>  {
> +       if (file_in->f_inode->i_sb != file_out->f_inode->i_sb)
> +               return -EXDEV;
> +
>         return ovl_copyfile(file_in, pos_in, file_out, pos_out, len, flags,
>                             OVL_COPY);
>  }
> diff --git a/fs/read_write.c b/fs/read_write.c
> index 39b4a21..fb4ffca 100644
> --- a/fs/read_write.c
> +++ b/fs/read_write.c
> @@ -1575,10 +1575,6 @@ ssize_t vfs_copy_file_range(struct file *file_in, loff_t pos_in,
>             (file_out->f_flags & O_APPEND))
>                 return -EBADF;
>
> -       /* this could be relaxed once a method supports cross-fs copies */
> -       if (inode_in->i_sb != inode_out->i_sb)
> -               return -EXDEV;
> -
>         if (len == 0)
>                 return 0;
>
> @@ -1588,7 +1584,8 @@ ssize_t vfs_copy_file_range(struct file *file_in, loff_t pos_in,
>          * Try cloning first, this is supported by more file systems, and
>          * more efficient if both clone and copy are supported (e.g. NFS).
>          */
> -       if (file_in->f_op->clone_file_range) {
> +       if (inode_in->i_sb == inode_out->i_sb &&
> +                       file_in->f_op->clone_file_range) {
>                 ret = file_in->f_op->clone_file_range(file_in, pos_in,
>                                 file_out, pos_out, len);
>                 if (ret == 0) {
> @@ -1600,7 +1597,7 @@ ssize_t vfs_copy_file_range(struct file *file_in, loff_t pos_in,
>         if (file_out->f_op->copy_file_range) {
>                 ret = file_out->f_op->copy_file_range(file_in, pos_in, file_out,
>                                                       pos_out, len, flags);
> -               if (ret != -EOPNOTSUPP)
> +               if (ret != -EOPNOTSUPP && ret != -EXDEV)
>                         goto done;
>         }
>
> --
> 1.8.3.1
>


-- 
Thanks,

Steve



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux