Re: [PATCH 2/2] fs/dcache: Make negative dentries easier to be reclaimed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 28, 2018 at 01:19:40PM -0400, Waiman Long wrote:
> For negative dentries that are accessed once and never used again, they
> should be removed first before other dentries when shrinker is running.
> This is done by putting negative dentries at the head of the LRU list
> instead at the tail.
> 
> A new DCACHE_NEW_NEGATIVE flag is now added to a negative dentry when it
> is initially created. When such a dentry is added to the LRU, it will be
> added to the head so that it will be the first to go when a shrinker is
> running if it is never accessed again (DCACHE_REFERENCED bit not set).
> The flag is cleared after the LRU list addition.

This exposes internal LRU list functionality to callers. I carefully
hid what end of the list was the most or least recent from
subsystems interacting with LRUs precisely because "head" and "tail"
are completely confusing when interacting with a LRU.

LRUs are about tracking relative object age, not heads and tails.

IOWs, "track this object as most recently used", not "add this
object to the list tail". The opposite is "track this object is
least recently used", not "add object at head of list".

IOWs, the interface should be list_lru_add_oldest() or maybe
list_lru_add_least_recent() to indicate that these objects are
considered to be the oldest and therefore prime immediate reclaim
candidates.

Which points out a problem. That the most recent negative dentry
will be the first to be reclaimed. That's not LRU behaviour, and
prevents a working set of negative dentries from being retained
when the shrinker rotates through the dentries in LRU order. i.e.
this patch turns the LRU into a MRU list for negative dentries.

And then there's shrinker behaviour. What happens if the shrinker
isolate callback returns LRU_ROTATE on a negative dentry? It gets
moved to the most recent end of the list, so it won't have an
attempt to reclaim it again until it's tried to reclaim all the real
dentries. IOWs, it goes back to behaving like LRUs are supposed to
behaving.

IOWs, reclaim behaviour of negative dentries will be
highly unpredictable, it will not easily retain a working set, nor
will the working set it does retain be predictable or easy to eject
from memory when the workload changes.

Is this the behavour what we want for negative dentries?

Perhaps a second internal LRU list in the list_lru for "immediate
reclaim" objects would be a better solution. i.e. similar to the
active/inactive lists used for prioritising the working set iover
single use pages in page reclaim. negative dentries go onto the
immediate list, real dentries go on the existing list. Both are LRU,
and the shrinker operates on the immediate list first. When we
rotate referenced negative dentries on the immediate list, promote
them to the active list with all the real dentries so they age out
with the rest of the working set. That way single use negative
dentries get removed in LRU order in preference to the working set
of real dentries.

Being able to make changes to the list implementation easily was one
of the reasons I hid the implementation of the list_lru from the
interface callers use....

[...]

> @@ -430,8 +424,20 @@ static void d_lru_add(struct dentry *dentry)
>  	D_FLAG_VERIFY(dentry, 0);
>  	dentry->d_flags |= DCACHE_LRU_LIST;
>  	this_cpu_inc(nr_dentry_unused);
> +	if (d_is_negative(dentry)) {
> +		__neg_dentry_inc(dentry);

/me notes this patch now open codes this, like suggested in the
previous patch.

> +		if (dentry->d_flags & DCACHE_NEW_NEGATIVE) {
> +			/*
> +			 * Add the negative dentry to the head once, it
> +			 * will be added to the tail next time.
> +			 */
> +			WARN_ON_ONCE(!list_lru_add_head(
> +				&dentry->d_sb->s_dentry_lru, &dentry->d_lru));
> +			dentry->d_flags &= ~DCACHE_NEW_NEGATIVE;
> +			return;
> +		}
> +	}
>  	WARN_ON_ONCE(!list_lru_add(&dentry->d_sb->s_dentry_lru, &dentry->d_lru));
> -	neg_dentry_inc(dentry);
>  }
>  
>  static void d_lru_del(struct dentry *dentry)
> @@ -2620,6 +2626,9 @@ static inline void __d_add(struct dentry *dentry, struct inode *inode)
>  		__d_set_inode_and_type(dentry, inode, add_flags);
>  		raw_write_seqcount_end(&dentry->d_seq);
>  		fsnotify_update_flags(dentry);
> +	} else {
> +		/* It is a negative dentry, add it to LRU head initially. */
> +		dentry->d_flags |= DCACHE_NEW_NEGATIVE;

Comments about LRU behaviour should not be put anywhere but in the
lru code. Otherwise it ends up stale and wrong, assuming it is
correct to start with....

>  	}
>  	__d_rehash(dentry);
>  	if (dir)
> diff --git a/include/linux/dcache.h b/include/linux/dcache.h
> index df942e5..03a1918 100644
> --- a/include/linux/dcache.h
> +++ b/include/linux/dcache.h
> @@ -214,6 +214,7 @@ struct dentry_operations {
>  #define DCACHE_FALLTHRU			0x01000000 /* Fall through to lower layer */
>  #define DCACHE_ENCRYPTED_WITH_KEY	0x02000000 /* dir is encrypted with a valid key */
>  #define DCACHE_OP_REAL			0x04000000
> +#define DCACHE_NEW_NEGATIVE		0x08000000 /* New negative dentry */
>  
>  #define DCACHE_PAR_LOOKUP		0x10000000 /* being looked up (with parent locked shared) */
>  #define DCACHE_DENTRY_CURSOR		0x20000000
> diff --git a/include/linux/list_lru.h b/include/linux/list_lru.h
> index aa5efd9..bfac057 100644
> --- a/include/linux/list_lru.h
> +++ b/include/linux/list_lru.h
> @@ -90,6 +90,23 @@ int __list_lru_init(struct list_lru *lru, bool memcg_aware,
>  bool list_lru_add(struct list_lru *lru, struct list_head *item);
>  
>  /**
> + * list_lru_add_head: add an element to the lru list's head
> + * @list_lru: the lru pointer
> + * @item: the item to be added.
> + *
> + * This is similar to list_lru_add(). The only difference is the location
> + * where the new item will be added. The list_lru_add() function will add
> + * the new item to the tail as it is the most recently used one. The
> + * list_lru_add_head() will add the new item into the head so that it
> + * will the first to go if a shrinker is running. So this function should
> + * only be used for less important item that can be the first to go if
> + * the system is under memory pressure.

As mentioned above, this API needs reference object ages, not
internal list ordering and shrinker implementation details.

Cheers,

Dave.
-- 
Dave Chinner
david@xxxxxxxxxxxxx



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux