KASAN error in [PATCH v3 7/8] proc/kcore: optimize multiple page reads

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> The current code does a full search of the segment list every time for
> every page. This is wasteful, since it's almost certain that the next
> page will be in the same segment. Instead, check if the previous segment
> covers the current page before doing the list search.
> 
> Signed-off-by: Omar Sandoval <osandov@xxxxxx>
> ---
>  fs/proc/kcore.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
> index e2ca58d49938..25fefdd05ee5 100644
> --- a/fs/proc/kcore.c
> +++ b/fs/proc/kcore.c
> @@ -428,10 +428,18 @@ read_kcore(struct file *file, char __user *buffer,
> size_t buflen, loff_t *fpos)
>  	if ((tsz = (PAGE_SIZE - (start & ~PAGE_MASK))) > buflen)
>  		tsz = buflen;
>  
> +	m = NULL;
>  	while (buflen) {
> -		list_for_each_entry(m, &kclist_head, list) {
> -			if (start >= m->addr && start < (m->addr+m->size))
> -				break;
> +		/*
> +		 * If this is the first iteration or the address is not within
> +		 * the previous entry, search for a matching entry.
> +		 */
> +		if (!m || start < m->addr || start >= m->addr + m->size) {

This line apparently triggers a KASAN warning since I rebooted on
4.19-rc1

This is 100% reproductible on my machine when the kdump service starts
(fedora28 x86_64 VM), here's the full stack (on 4.19-rc1):
[   38.161102] BUG: KASAN: global-out-of-bounds in read_kcore+0xd5c/0xf20
[   38.162123] Read of size 8 at addr ffffffffa6c0f770 by task kexec/6201

[   38.163386] CPU: 16 PID: 6201 Comm: kexec Not tainted 4.19.0-rc1+ #13
[   38.164374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[   38.166211] Call Trace:
[   38.166658]  dump_stack+0x71/0xa9
[   38.167443]  print_address_description+0x65/0x22e
[   38.168194]  ? read_kcore+0xd5c/0xf20
[   38.168778]  kasan_report.cold.6+0x241/0x306
[   38.169458]  read_kcore+0xd5c/0xf20
[   38.170018]  ? open_kcore+0x1d0/0x1d0
[   38.170605]  ? avc_has_perm_noaudit+0x370/0x370
[   38.171291]  ? kasan_unpoison_shadow+0x30/0x40
[   38.171973]  ? kasan_kmalloc+0xbf/0xe0
[   38.172562]  ? kmem_cache_alloc_trace+0x105/0x200
[   38.173289]  ? open_kcore+0x5f/0x1d0
[   38.173858]  ? open_kcore+0x5f/0x1d0
[   38.174428]  ? deref_stack_reg+0xe0/0xe0
[   38.175038]  proc_reg_read+0x18b/0x220
[   38.175652]  ? proc_reg_unlocked_ioctl+0x210/0x210
[   38.176399]  __vfs_read+0xe1/0x6b0
[   38.176930]  ? __x64_sys_copy_file_range+0x450/0x450
[   38.177723]  ? do_filp_open+0x190/0x250
[   38.178313]  ? may_open_dev+0xc0/0xc0
[   38.178886]  ? __fsnotify_update_child_dentry_flags.part.3+0x330/0x330
[   38.179883]  ? __fsnotify_inode_delete+0x20/0x20
[   38.180608]  ? __inode_security_revalidate+0x8e/0xb0
[   38.181378]  vfs_read+0xde/0x2c0
[   38.181889]  ksys_read+0xb2/0x160
[   38.182413]  ? kernel_write+0x130/0x130
[   38.183000]  ? task_work_run+0x74/0x1c0
[   38.183621]  do_syscall_64+0xa0/0x2e0
[   38.184183]  ? async_page_fault+0x8/0x30
[   38.184802]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   38.185610] RIP: 0033:0x7fc525d74091
[   38.186155] Code: fe ff ff 50 48 8d 3d b6 b6 09 00 e8 59 05 02 00 66 0f 1f 84 00 00 00 00 00 48 8d 05 51 39 2d 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 c3 66 0f 1f 44 00 00 41 54 49 89 d4 55 48
[   38.188980] RSP: 002b:00007fffd6802a28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[   38.190153] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc525d74091
[   38.191240] RDX: 0000000000010000 RSI: 00000000017f90b0 RDI: 0000000000000004
[   38.192329] RBP: 0000000000010000 R08: 00007fc526043420 R09: 0000000000000001
[   38.194593] R10: 00000000017e8010 R11: 0000000000000246 R12: 00000000017f90b0
[   38.196823] R13: 0000000000000004 R14: 00007fffd6802ac8 R15: 00007fffd6802cb0

[   38.200526] The buggy address belongs to the variable:
[   38.202539]  kclist_head+0x10/0x440

[   38.205568] Memory state around the buggy address:
[   38.207411]  ffffffffa6c0f600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   38.209648]  ffffffffa6c0f680: 00 00 00 00 00 00 00 00 04 fa fa fa fa fa fa fa
[   38.211812] >ffffffffa6c0f700: 00 00 00 00 00 fa fa fa fa fa fa fa 00 00 fa fa
[   38.213936]                                                              ^
[   38.216010]  ffffffffa6c0f780: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
[   38.218178]  ffffffffa6c0f800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   38.220306] ==================================================================

where
[   37.636589]  read_kcore+0xd5c/0xf20
symbolizes to
[<        none        >] read_kcore+0xd5c/0xf20 fs/proc/kcore.c:454
, the above check.


I haven't checked but I think I am in the first case below:
                if (&m->list == &kclist_head) {
meaning no address matched in the list, so you cannot check m->addr and
m->size in this case -- I'm afraid you will have to run through the list
just in case if that happens even if there likely won't be any match for
the next address either.


> +			list_for_each_entry(m, &kclist_head, list) {
> +				if (start >= m->addr &&
> +				    start < m->addr + m->size)
> +					break;
> +			}
>  		}
>  
>  		if (&m->list == &kclist_head) {

-- 
Dominique Martinet



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux