On Tue, Oct 10, 2017 at 07:38:18PM +0100, Dave P Martin wrote:
> Currently the regset API doesn't allow for the possibility that
> regsets (or at least, the amount of meaningful data in a regset)
> may change in size.
>
> In particular, this results in useless padding being added to
> coredumps in a regset's current size is smaller than its
> theoretical maximum size.
>
> This patch adds a get_size() function to struct user_regset.
> Individual regset implementations can implement this function to
> return the current size of the regset data. A regset_size()
> function is added to provide callers with an abstract interface for
> determining the size of a regset without needing to know whether
> the regset is dynamically sized or not.
>
> The only affected user of this interface is the ELF coredump code:
> This patch ports ELF coredump to dump regsets with their actual
> size in the coredump. This has no effect except for new regsets
> that are dynamically sized and provide a get_size() implementation.
>
> Signed-off-by: Dave Martin <Dave.Martin@xxxxxxx>
> Reviewed-by: Alex Bennée <alex.bennee@xxxxxxxxxx>
> ---
> fs/binfmt_elf.c | 6 ++---
> include/linux/regset.h | 67 ++++++++++++++++++++++++++++++++++++++++++++------
> 2 files changed, 63 insertions(+), 10 deletions(-)
The patch looks fine to me:
Reviewed-by: Catalin Marinas <catalin.marinas@xxxxxxx>
However, you'd probably need an ack from the filesystem maintainers
(cc'ed; patch below for reference).
> diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
> index 73b01e4..35aa03f 100644
> --- a/fs/binfmt_elf.c
> +++ b/fs/binfmt_elf.c
> @@ -1699,7 +1699,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
> long signr, size_t *total)
> {
> unsigned int i;
> - unsigned int regset_size = view->regsets[0].n * view->regsets[0].size;
> + unsigned int size = regset_size(t->task, &view->regsets[0]);
>
> /*
> * NT_PRSTATUS is the one special case, because the regset data
> @@ -1708,7 +1708,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
> * We assume that regset 0 is NT_PRSTATUS.
> */
> fill_prstatus(&t->prstatus, t->task, signr);
> - (void) view->regsets[0].get(t->task, &view->regsets[0], 0, regset_size,
> + (void) view->regsets[0].get(t->task, &view->regsets[0], 0, size,
> &t->prstatus.pr_reg, NULL);
>
> fill_note(&t->notes[0], "CORE", NT_PRSTATUS,
> @@ -1728,7 +1728,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
> if (regset->core_note_type && regset->get &&
> (!regset->active || regset->active(t->task, regset))) {
> int ret;
> - size_t size = regset->n * regset->size;
> + size_t size = regset_size(t->task, regset);
> void *data = kmalloc(size, GFP_KERNEL);
> if (unlikely(!data))
> return 0;
> diff --git a/include/linux/regset.h b/include/linux/regset.h
> index 8e0c9fe..494ceda 100644
> --- a/include/linux/regset.h
> +++ b/include/linux/regset.h
> @@ -107,6 +107,28 @@ typedef int user_regset_writeback_fn(struct task_struct *target,
> int immediate);
>
> /**
> + * user_regset_get_size_fn - type of @get_size function in &struct user_regset
> + * @target: thread being examined
> + * @regset: regset being examined
> + *
> + * This call is optional; usually the pointer is %NULL.
> + *
> + * When provided, this function must return the current size of regset
> + * data, as observed by the @get function in &struct user_regset. The
> + * value returned must be a multiple of @size. The returned size is
> + * required to be valid only until the next time (if any) @regset is
> + * modified for @target.
> + *
> + * This function is intended for dynamically sized regsets. A regset
> + * that is statically sized does not need to implement it.
> + *
> + * This function should not be called directly: instead, callers should
> + * call regset_size() to determine the current size of a regset.
> + */
> +typedef unsigned int user_regset_get_size_fn(struct task_struct *target,
> + const struct user_regset *regset);
> +
> +/**
> * struct user_regset - accessible thread CPU state
> * @n: Number of slots (registers).
> * @size: Size in bytes of a slot (register).
> @@ -117,19 +139,33 @@ typedef int user_regset_writeback_fn(struct task_struct *target,
> * @set: Function to store values.
> * @active: Function to report if regset is active, or %NULL.
> * @writeback: Function to write data back to user memory, or %NULL.
> + * @get_size: Function to return the regset's size, or %NULL.
> *
> * This data structure describes a machine resource we call a register set.
> * This is part of the state of an individual thread, not necessarily
> * actual CPU registers per se. A register set consists of a number of
> * similar slots, given by @n. Each slot is @size bytes, and aligned to
> - * @align bytes (which is at least @size).
> + * @align bytes (which is at least @size). For dynamically-sized
> + * regsets, @n must contain the maximum possible number of slots for the
> + * regset, and @get_size must point to a function that returns the
> + * current regset size.
> *
> - * These functions must be called only on the current thread or on a
> - * thread that is in %TASK_STOPPED or %TASK_TRACED state, that we are
> - * guaranteed will not be woken up and return to user mode, and that we
> - * have called wait_task_inactive() on. (The target thread always might
> - * wake up for SIGKILL while these functions are working, in which case
> - * that thread's user_regset state might be scrambled.)
> + * Callers that need to know only the current size of the regset and do
> + * not care about its internal structure should call regset_size()
> + * instead of inspecting @n or calling @get_size.
> + *
> + * For backward compatibility, the @get and @set methods must pad to, or
> + * accept, @n * @size bytes, even if the current regset size is smaller.
> + * The precise semantics of these operations depend on the regset being
> + * accessed.
> + *
> + * The functions to which &struct user_regset members point must be
> + * called only on the current thread or on a thread that is in
> + * %TASK_STOPPED or %TASK_TRACED state, that we are guaranteed will not
> + * be woken up and return to user mode, and that we have called
> + * wait_task_inactive() on. (The target thread always might wake up for
> + * SIGKILL while these functions are working, in which case that
> + * thread's user_regset state might be scrambled.)
> *
> * The @pos argument must be aligned according to @align; the @count
> * argument must be a multiple of @size. These functions are not
> @@ -156,6 +192,7 @@ struct user_regset {
> user_regset_set_fn *set;
> user_regset_active_fn *active;
> user_regset_writeback_fn *writeback;
> + user_regset_get_size_fn *get_size;
> unsigned int n;
> unsigned int size;
> unsigned int align;
> @@ -371,5 +408,21 @@ static inline int copy_regset_from_user(struct task_struct *target,
> return regset->set(target, regset, offset, size, NULL, data);
> }
>
> +/**
> + * regset_size - determine the current size of a regset
> + * @target: thread to be examined
> + * @regset: regset to be examined
> + *
> + * Note that the returned size is valid only until the next time
> + * (if any) @regset is modified for @target.
> + */
> +static inline unsigned int regset_size(struct task_struct *target,
> + const struct user_regset *regset)
> +{
> + if (!regset->get_size)
> + return regset->n * regset->size;
> + else
> + return regset->get_size(target, regset);
> +}
>
> #endif /* <linux/regset.h> */
> --
> 2.1.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
