[RFC][PATCH 07/11] ocfs2: use common file type conversion

[Amir Goldstein <amir73il@xxxxxxxxx>]

deduplicate the ocfs2 file type conversion implementation.

Signed-off-by: Amir Goldstein <amir73il@xxxxxxxxx>
---
 fs/ocfs2/dir.c      | 18 +++---------------
 fs/ocfs2/ocfs2_fs.h | 32 +++++++++++---------------------
 2 files changed, 14 insertions(+), 36 deletions(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 3ecb9f3..9321459 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -68,10 +68,6 @@
 #define NAMEI_RA_BLOCKS  4
 #define NAMEI_RA_SIZE        (NAMEI_RA_CHUNKS * NAMEI_RA_BLOCKS)
 
-static unsigned char ocfs2_filetype_table[] = {
-	DT_UNKNOWN, DT_REG, DT_DIR, DT_CHR, DT_BLK, DT_FIFO, DT_SOCK, DT_LNK
-};
-
 static int ocfs2_do_extend_dir(struct super_block *sb,
 			       handle_t *handle,
 			       struct inode *dir,
@@ -1802,13 +1798,9 @@ static int ocfs2_dir_foreach_blk_id(struct inode *inode,
 		}
 		offset += le16_to_cpu(de->rec_len);
 		if (le64_to_cpu(de->inode)) {
-			unsigned char d_type = DT_UNKNOWN;
-
-			if (de->file_type < OCFS2_FT_MAX)
-				d_type = ocfs2_filetype_table[de->file_type];
-
 			if (!dir_emit(ctx, de->name, de->name_len,
-				      le64_to_cpu(de->inode), d_type))
+				      le64_to_cpu(de->inode),
+				      fs_dtype(de->file_type)))
 				goto out;
 		}
 		ctx->pos += le16_to_cpu(de->rec_len);
@@ -1900,14 +1892,10 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
 				continue;
 			}
 			if (le64_to_cpu(de->inode)) {
-				unsigned char d_type = DT_UNKNOWN;
-
-				if (de->file_type < OCFS2_FT_MAX)
-					d_type = ocfs2_filetype_table[de->file_type];
 				if (!dir_emit(ctx, de->name,
 						de->name_len,
 						le64_to_cpu(de->inode),
-						d_type)) {
+						fs_dtype(de->file_type))) {
 					brelse(bh);
 					return 0;
 				}
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 44d178b..742b7ab 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -395,17 +395,18 @@ static struct ocfs2_system_inode_info ocfs2_system_inodes[NUM_SYSTEM_INODES] = {
 /*
  * OCFS2 directory file types.  Only the low 3 bits are used.  The
  * other bits are reserved for now.
+ * Values are taken from common file type implementation.
  */
-#define OCFS2_FT_UNKNOWN	0
-#define OCFS2_FT_REG_FILE	1
-#define OCFS2_FT_DIR		2
-#define OCFS2_FT_CHRDEV		3
-#define OCFS2_FT_BLKDEV		4
-#define OCFS2_FT_FIFO		5
-#define OCFS2_FT_SOCK		6
-#define OCFS2_FT_SYMLINK	7
+#define OCFS2_FT_UNKNOWN	FT_UNKNOWN
+#define OCFS2_FT_REG_FILE	FT_REG_FILE
+#define OCFS2_FT_DIR		FT_DIR
+#define OCFS2_FT_CHRDEV		FT_CHRDEV
+#define OCFS2_FT_BLKDEV		FT_BLKDEV
+#define OCFS2_FT_FIFO		FT_FIFO
+#define OCFS2_FT_SOCK		FT_SOCK
+#define OCFS2_FT_SYMLINK	FT_SYMLINK
 
-#define OCFS2_FT_MAX		8
+#define OCFS2_FT_MAX		FT_MAX
 
 /*
  * OCFS2_DIR_PAD defines the directory entries boundaries
@@ -425,17 +426,6 @@ static struct ocfs2_system_inode_info ocfs2_system_inodes[NUM_SYSTEM_INODES] = {
 #define	OCFS2_LINKS_HI_SHIFT	16
 #define	OCFS2_DX_ENTRIES_MAX	(0xffffffffU)
 
-#define S_SHIFT			12
-static unsigned char ocfs2_type_by_mode[S_IFMT >> S_SHIFT] = {
-	[S_IFREG >> S_SHIFT]  = OCFS2_FT_REG_FILE,
-	[S_IFDIR >> S_SHIFT]  = OCFS2_FT_DIR,
-	[S_IFCHR >> S_SHIFT]  = OCFS2_FT_CHRDEV,
-	[S_IFBLK >> S_SHIFT]  = OCFS2_FT_BLKDEV,
-	[S_IFIFO >> S_SHIFT]  = OCFS2_FT_FIFO,
-	[S_IFSOCK >> S_SHIFT] = OCFS2_FT_SOCK,
-	[S_IFLNK >> S_SHIFT]  = OCFS2_FT_SYMLINK,
-};
-
 
 /*
  * Convenience casts
@@ -1630,7 +1620,7 @@ static inline int ocfs2_sprintf_system_inode_name(char *buf, int len,
 static inline void ocfs2_set_de_type(struct ocfs2_dir_entry *de,
 				    umode_t mode)
 {
-	de->file_type = ocfs2_type_by_mode[(mode & S_IFMT)>>S_SHIFT];
+	de->file_type = fs_umode_to_ftype(mode);
 }
 
 static inline int ocfs2_gd_is_discontig(struct ocfs2_group_desc *gd)
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html