On Fri, 2007-09-14 at 07:22 +1000, Nick Piggin wrote:
> On Friday 14 September 2007 16:02, Soeren Sonnenburg wrote:
> > On Thu, 2007-09-13 at 09:51 +1000, Nick Piggin wrote:
> > > On Thursday 13 September 2007 19:20, Soeren Sonnenburg wrote:
> > > > Dear all,
> > > >
> > > > I've just seen this in dmesg on a AMD K7 / kernel 2.6.22.6 machine
> > > > (config attached).
> > > >
> > > > Any ideas / which further information needed ?
> > >
> > > Thanks for the report. Is it reproduceable? It seems like the
> > > locks_free_lock call that's oopsing is coming from __posix_lock_file.
> > > The actual function looks fine, but the lock being freed could have
> > > been corrupted if there was slab corruption, or a hardware corruption.
> > >
> > > You could: try running memtest86+ overnight. And try the following
> > > patch and turn on slab debugging then try to reproduce the problem.
> >
> > OK so far I've run memtest86+ 1.40 from freedos for 8 hrs (v1.70 hung on
> > startup) - nothing.
>
> Thanks.
>
> > Could this corruption be caused by a pci card/driver? I am asking as I
> > am using a new dvb-t card (asus p7131) and the oops happened after 5 or
> > 6 days of uptime just about a day after watching some movie (very bad
> > reception/lots of errors).
>
> It could be caused by that, definitely. slab debugging plus my earlier
> patch may help to narrow it down. (or stress testing with / without the
> dvb card in action).
>
>
> > However this machine used to have uptimes of months before the dvb card
> > was in there and the kernel version upgrade (don't know which version
> > that was...).
> >
> > Anyway I am not sure if this is reproducible, but I will keep memtest
> > running today and then proceed as you said...
>
> OK. Don't put too much effort into memtest if it hasn't caught anything
> by now -- it's really only exercising your CPU and memory, so even if it
> is your video hardware, it probably won't find the problem.
Memtest did not find anything after 16 passes so I finally stopped it
applied your patch and used
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
and booted into the new kernel.
A few hours later the machine hung (due to nmi watchdog rebooted), so I
restarted and disabled the watchdog and while compiling a kernel with a
``more minimal'' config I got this (not sure whether this is related/the
cause .../ note that I don't use a swapfile/partition).
I would need more guidance on what to try now...
Thanks!
Soeren
swap_dup: Bad swap file entry 28c8af9d
VM: killing process cc1
Eeek! page_mapcount(page) went negative! (-1)
page pfn = 36233
page->flags = 40000834
page->count = 2
page->mapping = c1cfed14
vma->vm_ops = run_init_process+0x3feff000/0x14
------------[ cut here ]------------
kernel BUG at mm/rmap.c:628!
invalid opcode: 0000 [#1]
Modules linked in: ipt_iprange ipt_REDIRECT capi kernelcapi capifs ipt_REJECT xt_tcpudp xt_state xt_limit ipt_LOG ipt_MASQUERADE iptable_mangle iptable_nat nf_conntrack_ipv4 iptable_filter ip_tables x_tables b44 ohci1394 ieee1394 nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack lcd tda827x saa7134_dvb dvb_pll video_buf_dvb tda1004x tuner ves1820 usb_storage usblp budget_ci budget_core saa7134 compat_ioctl32 dvb_ttpci dvb_core saa7146_vv video_buf saa7146 ttpci_eeprom ir_kbd_i2c videodev v4l2_common v4l1_compat ir_common via_agp agpgart
CPU: 0
EIP: 0060:[<c0144487>] Not tainted VLI
EFLAGS: 00010246 (2.6.22.6 #2)
EIP is at page_remove_rmap+0xd4/0x101
eax: 00000000 ebx: c16c4660 ecx: 00000000 edx: 00000000
esi: d4570b30 edi: d6560a78 ebp: b7400000 esp: d6265eac
ds: 007b es: 007b fs: 0000 gs: 0000 ss: 0068
Process cc1 (pid: 26095, ti=d6264000 task=d67af5b0 task.ti=d6264000)
Stack: c0422e26 c1cfed14 c16c4660 b729e000 c013f5b8 36233cce 00000000 d4570b30
d6265f20 00000000 00000001 f4ffcb70 f483a3b8 c04f44b8 00000000 ffffffff
f4ffcb70 00303ff4 b7c18000 00000000 d6265f20 f4a8c510 f483a3b8 00000009
Call Trace:
[<c013f5b8>] unmap_vmas+0x23f/0x404
[<c0141c09>] exit_mmap+0x5f/0xc9
[<c011923a>] mmput+0x1b/0x5e
[<c011cf97>] do_exit+0x1a0/0x606
[<c01135f8>] do_page_fault+0x49c/0x518
[<c011e340>] __do_softirq+0x35/0x75
[<c011315c>] do_page_fault+0x0/0x518
[<c039aada>] error_code+0x6a/0x70
=======================
Code: c0 74 0d 8b 50 08 b8 56 2e 42 c0 e8 ac f4 fe ff 8b 46 48 85 c0 74 14 8b 40 10 85 c0 74 0d 8b 50 2c b8 75 2e 42 c0 e8 91 f4 fe ff <0f> 0b eb fe 8b 53 10 8b 03 83 e2 01 c1 e8 1e f7 da 83 c2 04 69
EIP: [<c0144487>] page_remove_rmap+0xd4/0x101 SS:ESP 0068:d6265eac
Fixing recursive fault but reboot is needed!
--
Sometimes, there's a moment as you're waking, when you become aware of
the real world around you, but you're still dreaming.
-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
