[1] slow NFS locking, dmesg reports "lockd: failed to monitor xxxxx"
[2] Applications which set locks in NFS mounted home directories start
very slowly.
dmesg shows the following, repeated over and over:
lockd: cannot monitor cabinet
lockd: failed to monitor cabinet
(cabinet is running Solaris 7 with standard NFS server)
When the problem manifests itself the client machine does not show any
unusual loading.
[3] Keywords: kernel, lockd, nfs
[4] Kernel version: Linux version 2.6.22-intel965 (root@wolf) (gcc
version 4.1.0 (SUSE Linux)) #1 SMP Tue Jul 10 11:59:15 BST 2007
[5] No Oops
[6] Problem repeatable by logging on to KDE where the user has an NFS
mounted home directory.
[7.1] Software:
Linux wolf 2.6.22-intel965 #1 SMP Tue Jul 10 11:59:15 BST 2007 x86_64
x86_64 x86_64 GNU/Linux
Gnu C 4.1.0
Gnu make 3.80
binutils 2.16.91.0.5
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.38
jfsutils 1.1.10
reiserfsprogs 3.6.19
xfsprogs 2.7.11
PPP 2.4.3
nfs-utils 1.0.7
Linux C Library > libc.2.4
Dynamic linker (ldd) 2.4
Linux C++ Library 6.0.8
Procps 3.2.6
Net-tools 1.60
Kbd 1.12
Sh-utils 5.93
udev 085
wireless-tools 28
Modules Loaded snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device
snd_hda_intel snd_pcm snd_timer snd iptable_filter ip_tables x_tables
nfs nfsd exportfs lockd nfs_acl sunrpc autofs4 cpufreq_ondemand
cpufreq_userspace cpufreq_powersave acpi_cpufreq freq_table ipv6
af_packet edd button battery ac loop dm_mod e1000 soundcore
snd_page_alloc parport_pc lp parport reiserfs fan thermal processor
generic sg sr_mod cdrom ata_piix libata sd_mod scsi_mod ide_disk ide_core
[7.2] Processor info
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz
stepping : 6
cpu MHz : 1596.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4265.61
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz
stepping : 6
cpu MHz : 1596.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4262.77
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
[7.3] Module info:
snd_pcm_oss 67968 0 - Live 0xffffffff88290000
snd_mixer_oss 34560 1 snd_pcm_oss, Live 0xffffffff88286000
snd_seq 75680 0 - Live 0xffffffff88272000
snd_seq_device 25876 1 snd_seq, Live 0xffffffff8826a000
snd_hda_intel 346784 2 - Live 0xffffffff881a4000
snd_pcm 109448 2 snd_pcm_oss,snd_hda_intel, Live 0xffffffff88188000
snd_timer 42760 2 snd_seq,snd_pcm, Live 0xffffffff8817c000
snd 85544 11
snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,
Live 0xffffffff88166000
iptable_filter 20096 0 - Live 0xffffffff8841e000
ip_tables 37992 1 iptable_filter, Live 0xffffffff88413000
x_tables 37384 1 ip_tables, Live 0xffffffff88408000
nfs 269528 10 - Live 0xffffffff883c5000
nfsd 273192 9 - Live 0xffffffff88381000
exportfs 22912 1 nfsd, Live 0xffffffff8837a000
lockd 85808 3 nfs,nfsd, Live 0xffffffff88364000
nfs_acl 20608 2 nfs,nfsd, Live 0xffffffff8835d000
sunrpc 199816 11 nfs,nfsd,lockd,nfs_acl, Live 0xffffffff8832b000
autofs4 41224 6 - Live 0xffffffff8831f000
cpufreq_ondemand 25744 2 - Live 0xffffffff88317000
cpufreq_userspace 23936 0 - Live 0xffffffff88310000
cpufreq_powersave 18816 0 - Live 0xffffffff8830a000
acpi_cpufreq 28296 0 - Live 0xffffffff88302000
freq_table 22912 2 cpufreq_ondemand,acpi_cpufreq, Live 0xffffffff882fb000
ipv6 357864 20 - Live 0xffffffff882a2000
af_packet 57100 2 - Live 0xffffffff8825b000
edd 27144 0 - Live 0xffffffff88253000
button 26016 0 - Live 0xffffffff8824b000
battery 28040 0 - Live 0xffffffff88243000
ac 22920 0 - Live 0xffffffff8823c000
loop 35844 0 - Live 0xffffffff88232000
dm_mod 77040 0 - Live 0xffffffff8821e000
e1000 140224 0 - Live 0xffffffff881fa000
soundcore 25632 1 snd, Live 0xffffffff8815e000
snd_page_alloc 27536 2 snd_hda_intel,snd_pcm, Live 0xffffffff88156000
parport_pc 59368 1 - Live 0xffffffff88146000
lp 30024 0 - Live 0xffffffff8813d000
parport 57228 2 parport_pc,lp, Live 0xffffffff8812e000
reiserfs 246016 1 - Live 0xffffffff880f0000
fan 22536 0 - Live 0xffffffff880e9000
thermal 32144 0 - Live 0xffffffff880e0000
processor 54376 2 acpi_cpufreq,thermal, Live 0xffffffff880d1000
generic 22916 0 [permanent], Live 0xffffffff880ca000
sg 53800 0 - Live 0xffffffff880bb000
sr_mod 33828 0 - Live 0xffffffff880af000
cdrom 52520 1 sr_mod, Live 0xffffffff880a1000
ata_piix 33796 2 - Live 0xffffffff88095000
libata 144912 1 ata_piix, Live 0xffffffff88070000
sd_mod 45952 3 - Live 0xffffffff88063000
scsi_mod 177336 4 sg,sr_mod,libata,sd_mod, Live 0xffffffff88036000
ide_disk 34560 0 - Live 0xffffffff8802c000
ide_core 166160 2 generic,ide_disk, Live 0xffffffff88002000
[7.4] Loaded driver and hardware information
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0378-037a : parport0
03c0-03df : vesafb
03f8-03ff : serial
0400-047f : 0000:00:1f.0
0400-047f : pnp 00:06
0400-0403 : ACPI PM1a_EVT_BLK
0404-0405 : ACPI PM1a_CNT_BLK
0408-040b : ACPI PM_TMR
0410-0415 : ACPI CPU throttle
0420-0420 : ACPI PM2_CNT_BLK
0428-042f : ACPI GPE0_BLK
0500-053f : 0000:00:1f.0
0500-053f : pnp 00:06
0680-06ff : pnp 00:06
0778-077a : parport0
0cf8-0cff : PCI conf1
1000-1fff : PCI Bus #02
1000-100f : 0000:02:00.0
1010-1017 : 0000:02:00.0
1018-101f : 0000:02:00.0
1020-1023 : 0000:02:00.0
1024-1027 : 0000:02:00.0
2000-201f : 0000:00:1f.3
2020-203f : 0000:00:1d.2
2040-205f : 0000:00:1d.1
2060-207f : 0000:00:1d.0
2080-209f : 0000:00:1a.1
20a0-20bf : 0000:00:1a.0
20c0-20df : 0000:00:19.0
20c0-20df : e1000
20e0-20ef : 0000:00:1f.5
20f0-20ff : 0000:00:1f.5
20f0-20ff : libata
2400-240f : 0000:00:1f.2
2410-241f : 0000:00:1f.2
2410-241f : libata
2420-2427 : 0000:00:1f.5
2420-2427 : libata
2428-242f : 0000:00:1f.5
2428-242f : libata
2430-2437 : 0000:00:1f.2
2430-2437 : libata
2438-243f : 0000:00:1f.2
2438-243f : libata
2440-2447 : 0000:00:02.0
2448-244b : 0000:00:1f.5
2448-244b : libata
244c-244f : 0000:00:1f.5
244c-244f : libata
2450-2453 : 0000:00:1f.2
2450-2453 : libata
2454-2457 : 0000:00:1f.2
2454-2457 : libata
00000000-0008efff : System RAM
00000000-00000000 : Crash kernel
0008f000-0009ffff : reserved
000e0000-000fffff : reserved
00100000-7e598fff : System RAM
00200000-003fb2f5 : Kernel code
003fb2f6-004f3d5f : Kernel data
7e599000-7e5a5fff : reserved
7e5a6000-7e621fff : System RAM
7e622000-7e6a5fff : ACPI Non-volatile Storage
7e6a6000-7e6aafff : ACPI Tables
7e6ab000-7e6f1fff : ACPI Non-volatile Storage
7e6f2000-7e6f2fff : System RAM
7e6f3000-7e6fefff : ACPI Tables
7e6ff000-7e6fffff : System RAM
7e700000-7effffff : reserved
80000000-8fffffff : 0000:00:02.0
80000000-8076ffff : vesafb
90000000-900fffff : PCI Bus #06
90000000-90003fff : 0000:06:03.0
90004000-900047ff : 0000:06:03.0
90100000-901fffff : PCI Bus #02
90100000-901001ff : 0000:02:00.0
90200000-902fffff : 0000:00:02.0
90300000-9031ffff : 0000:00:19.0
90300000-9031ffff : e1000
90320000-90323fff : 0000:00:1b.0
90320000-90323fff : ICH HD audio
90324000-90324fff : 0000:00:19.0
90324000-90324fff : e1000
90325000-903253ff : 0000:00:1d.7
90325400-903257ff : 0000:00:1a.7
90325800-903258ff : 0000:00:1f.3
90325900-9032590f : 0000:00:03.0
f0000000-f7ffffff : pnp 00:01
fec00000-fec00fff : IOAPIC 0
fed13000-fed13fff : pnp 00:01
fed14000-fed17fff : pnp 00:01
fed18000-fed18fff : pnp 00:01
fee00000-fee00fff : Local APIC
fff00000-ffffffff : reserved
[7.5] PCI information:
00:00.0 Host bridge: Intel Corp. Memory Controller Hub (rev 02)
Subsystem: Intel Corp. Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corp. Integrated Graphics
Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2440 [size=8]
Capabilities: [90] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corp. HECI Controller (rev 02)
Subsystem: Intel Corp. Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90325900 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corp. 82566DC Gigabit Network
Connection (rev 02)
Subsystem: Intel Corp. Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 4346
Region 0: Memory at 90300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 90324000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 20c0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable+
Address: 00000000fee0300c Data: 41a1
00:1a.0 USB Controller: Intel Corp. USB UHCI Controller #4 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 20a0 [size=32]
00:1a.1 USB Controller: Intel Corp. USB UHCI Controller #5 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 2080 [size=32]
00:1a.7 USB Controller: Intel Corp. USB2 EHCI Controller #2 (rev 02)
(prog-if 20 [EHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: Memory at 90325400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1b.0 Audio device: Intel Corp. HD Audio Controller (rev 02)
Subsystem: Intel Corp. Unknown device 2114
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 90320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown,
Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1c.0 PCI bridge: Intel Corp. PCI Express Port 1 (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 1, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable+
Address: fee0300c Data: 4169
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corp. PCI Express Port 2 (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90100000-901fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 2, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable+
Address: fee0300c Data: 4171
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.2 PCI bridge: Intel Corp. PCI Express Port 3 (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 3, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable+
Address: fee0300c Data: 4179
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.3 PCI bridge: Intel Corp. PCI Express Port 4 (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 4, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable+
Address: fee0300c Data: 4181
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.4 PCI bridge: Intel Corp. PCI Express Port 5 (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 5, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable+
Address: fee0300c Data: 4189
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corp. USB UHCI Controller #1 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 2060 [size=32]
00:1d.1 USB Controller: Intel Corp. USB UHCI Controller #2 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 2040 [size=32]
00:1d.2 USB Controller: Intel Corp. USB UHCI Controller #3 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 2020 [size=32]
00:1d.7 USB Controller: Intel Corp. USB2 EHCI Controller #1 (rev 02)
(prog-if 20 [EHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90325000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev f2) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 90000000-900fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corp. LPC Interface Controller (rev 02)
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corp. SATA Controller 1 IDE (rev 02)
(prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2438 [size=8]
Region 1: I/O ports at 2454 [size=4]
Region 2: I/O ports at 2430 [size=8]
Region 3: I/O ports at 2450 [size=4]
Region 4: I/O ports at 2410 [size=16]
Region 5: I/O ports at 2400 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.3 SMBus: Intel Corp. SMBus Controller (rev 02)
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 90325800 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2000 [size=32]
00:1f.5 IDE interface: Intel Corp. SATA Controller 2 IDE (rev 02)
(prog-if 85 [Master SecO PriO])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2428 [size=8]
Region 1: I/O ports at 244c [size=4]
Region 2: I/O ports at 2420 [size=8]
Region 3: I/O ports at 2448 [size=4]
Region 4: I/O ports at 20f0 [size=16]
Region 5: I/O ports at 20e0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101
(rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. Unknown device 6101
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1018 [size=8]
Region 1: I/O ports at 1024 [size=4]
Region 2: I/O ports at 1010 [size=8]
Region 3: I/O ports at 1020 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at 90100000 (32-bit, non-prefetchable) [size=512]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <256ns, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Intel Corp. Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache Line Size 10
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6] SCSI Information:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3250620AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: TSSTcorp Model: CD/DVDW SH-S183A Rev: SB02
Type: CD-ROM ANSI SCSI revision: 05
[X] Workaround appears to be to run an earlier kernel. I have observed
2.6.16.27 working on the same machine and otherwise identical
installation without this problem.
-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
