On Thu, Apr 12, 2007 at 06:48:52AM +0200, Nick Piggin wrote: > http://www.kernel.org/pub/linux/kernel/people/npiggin/patches/new-aops/ > > 2.6.21-rc6-new-aops* > > New aops patchset against 2.6.21-rc6. Ok, here's an ocfs2 patch against -mm / ocfs2.git ALL. It makes use of the context back pointer to store information related to the write which the vfs normally doesn't know about. Most importantly this is an array of zero'd pages which might have to be written out for an allocating write. Of note is that I also stick the journal handle on there. Ocfs2 could use current->journal_info for that, but I think it's much cleaner to just pass that around as a file system specific context. I tested this on a couple nodes and things seem to be running smoothly. A couple of notes: * The ocfs2 write context is probably a bit big. I'm much more concerned with readability though as Ocfs2 has much more baggage to carry around than other file systems. * A ton of code was deleted :) The patch adds a bunch too, but that's mostly getting the old stuff to flow with ->write_begin. Some assumptions about the size of the write that were made with my previous implemenation were no longer true (this is good). * I could probably clean this up some more, but I'd be fine if the patch went upstream as-is. Diff seems to have mangled this patch file enough that it's probably much easier to read once applied. * This doesn't use ->perform_write (yet), so stuff is still being copied one page at a time. I _think_ things are pretty reasonably set up to allow larger writes though... --Mark -- Mark Fasheh Senior Software Developer, Oracle mark.fasheh@xxxxxxxxxx From: Mark Fasheh <mark.fasheh@xxxxxxxxxx> ocfs2: Convert to new aops Fix up ocfs2 to use ->write_begin and ->write_end. This lets us dump a large amount of code which was implementing our own write path while preserving the nice locking rules that were gained by moving away from ->prepare_write. Signed-off-by: Mark Fasheh <mark.fasheh@xxxxxxxxxx> --- fs/ocfs2/aops.c | 777 +++++++++++++++++++++++++++++++------------------------ fs/ocfs2/aops.h | 52 ---- fs/ocfs2/file.c | 246 +---------------- 3 files changed, 452 insertions(+), 623 deletions(-) 62668000c621fd18da6adf52e219f933e337e4bd diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index b74971e..55100cf 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -677,6 +677,8 @@ int ocfs2_map_page_blocks(struct page *p bh = bh->b_this_page, block_start += bsize) { block_end = block_start + bsize; + clear_buffer_new(bh); + /* * Ignore blocks outside of our i/o range - * they may belong to unallocated clusters. @@ -691,9 +693,8 @@ int ocfs2_map_page_blocks(struct page *p * For an allocating write with cluster size >= page * size, we always write the entire page. */ - - if (buffer_new(bh)) - clear_buffer_new(bh); + if (new) + set_buffer_new(bh); if (!buffer_mapped(bh)) { map_bh(bh, inode->i_sb, *p_blkno); @@ -754,217 +755,187 @@ next_bh: return ret; } +#if (PAGE_CACHE_SIZE >= OCFS2_MAX_CLUSTERSIZE) +#define OCFS2_MAX_CTXT_PAGES 1 +#else +#define OCFS2_MAX_CTXT_PAGES (OCFS2_MAX_CLUSTERSIZE / PAGE_CACHE_SIZE) +#endif + +#define OCFS2_MAX_CLUSTERS_PER_PAGE (PAGE_CACHE_SIZE / OCFS2_MIN_CLUSTERSIZE) + /* - * This will copy user data from the buffer page in the splice - * context. - * - * For now, we ignore SPLICE_F_MOVE as that would require some extra - * communication out all the way to ocfs2_write(). + * Describe the state of a single cluster to be written to. */ -int ocfs2_map_and_write_splice_data(struct inode *inode, - struct ocfs2_write_ctxt *wc, u64 *p_blkno, - unsigned int *ret_from, unsigned int *ret_to) -{ - int ret; - unsigned int to, from, cluster_start, cluster_end; - char *src, *dst; - struct ocfs2_splice_write_priv *sp = wc->w_private; - struct pipe_buffer *buf = sp->s_buf; - unsigned long bytes, src_from; - struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); +struct ocfs2_write_cluster_desc { + u32 c_cpos; + u32 c_phys; + /* + * Give this a unique field because c_phys eventually gets + * filled. + */ + unsigned c_new; +}; - ocfs2_figure_cluster_boundaries(osb, wc->w_cpos, &cluster_start, - &cluster_end); +struct ocfs2_write_ctxt { + /* Logical cluster position / len of write */ + u32 w_cpos; + u32 w_clen; - from = sp->s_offset; - src_from = sp->s_buf_offset; - bytes = wc->w_count; + struct ocfs2_write_cluster_desc w_desc[OCFS2_MAX_CLUSTERS_PER_PAGE]; - if (wc->w_large_pages) { - /* - * For cluster size < page size, we have to - * calculate pos within the cluster and obey - * the rightmost boundary. - */ - bytes = min(bytes, (unsigned long)(osb->s_clustersize - - (wc->w_pos & (osb->s_clustersize - 1)))); - } - to = from + bytes; + /* + * This is true if page_size > cluster_size. + * + * It triggers a set of special cases during write which might + * have to deal with allocating writes to partial pages. + */ + unsigned int w_large_pages; - if (wc->w_this_page_new) - ret = ocfs2_map_page_blocks(wc->w_this_page, p_blkno, inode, - cluster_start, cluster_end, 1); - else - ret = ocfs2_map_page_blocks(wc->w_this_page, p_blkno, inode, - from, to, 0); - if (ret) { - mlog_errno(ret); - goto out; - } + /* + * Pages involved in this write. + * + * w_target_page is the page being written to by the user. + * + * w_pages is an array of pages which always contains + * w_target_page, and in the case of an allocating write with + * page_size < cluster size, it will contain zero'd and mapped + * pages adjacent to w_target_page which need to be written + * out in so that future reads from that region will get + * zero's. + */ + struct page *w_pages[OCFS2_MAX_CTXT_PAGES]; + unsigned int w_num_pages; + struct page *w_target_page; - BUG_ON(from > PAGE_CACHE_SIZE); - BUG_ON(to > PAGE_CACHE_SIZE); - BUG_ON(from > osb->s_clustersize); - BUG_ON(to > osb->s_clustersize); + /* + * ocfs2_write_end() uses this to know what the real range to + * write in the target should be. + */ + unsigned int w_target_from; + unsigned int w_target_to; - src = buf->ops->map(sp->s_pipe, buf, 1); - dst = kmap_atomic(wc->w_this_page, KM_USER1); - memcpy(dst + from, src + src_from, bytes); - kunmap_atomic(wc->w_this_page, KM_USER1); - buf->ops->unmap(sp->s_pipe, buf, src); + /* + * We could use journal_current_handle() but this is cleaner, + * IMHO -Mark + */ + handle_t *w_handle; - wc->w_finished_copy = 1; + struct buffer_head *w_di_bh; +}; - *ret_from = from; - *ret_to = to; -out: +static void ocfs2_free_write_ctxt(struct ocfs2_write_ctxt *wc) +{ + int i; + + for(i = 0; i < wc->w_num_pages; i++) { + if (wc->w_pages[i] == NULL) + continue; - return bytes ? (unsigned int)bytes : ret; + unlock_page(wc->w_pages[i]); + mark_page_accessed(wc->w_pages[i]); + page_cache_release(wc->w_pages[i]); + } + + brelse(wc->w_di_bh); + kfree(wc); } -/* - * This will copy user data from the iovec in the buffered write - * context. - */ -int ocfs2_map_and_write_user_data(struct inode *inode, - struct ocfs2_write_ctxt *wc, u64 *p_blkno, - unsigned int *ret_from, unsigned int *ret_to) +static int ocfs2_alloc_write_ctxt(struct ocfs2_write_ctxt **wcp, + struct ocfs2_super *osb, loff_t pos, + unsigned len) { - int ret; - unsigned int to, from, cluster_start, cluster_end; - unsigned long bytes, src_from; - char *dst; - struct ocfs2_buffered_write_priv *bp = wc->w_private; - const struct iovec *cur_iov = bp->b_cur_iov; - char __user *buf; - struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + struct ocfs2_write_ctxt *wc; - ocfs2_figure_cluster_boundaries(osb, wc->w_cpos, &cluster_start, - &cluster_end); + wc = kzalloc(sizeof(struct ocfs2_write_ctxt), GFP_NOFS); + if (!wc) + return -ENOMEM; - buf = cur_iov->iov_base + bp->b_cur_off; - src_from = (unsigned long)buf & ~PAGE_CACHE_MASK; + wc->w_cpos = pos >> osb->s_clustersize_bits; + wc->w_clen = ocfs2_clusters_for_bytes(osb->sb, len); - from = wc->w_pos & (PAGE_CACHE_SIZE - 1); + if (unlikely(PAGE_CACHE_SHIFT > osb->s_clustersize_bits)) + wc->w_large_pages = 1; + else + wc->w_large_pages = 0; - /* - * This is a lot of comparisons, but it reads quite - * easily, which is important here. - */ - /* Stay within the src page */ - bytes = PAGE_SIZE - src_from; - /* Stay within the vector */ - bytes = min(bytes, - (unsigned long)(cur_iov->iov_len - bp->b_cur_off)); - /* Stay within count */ - bytes = min(bytes, (unsigned long)wc->w_count); - /* - * For clustersize > page size, just stay within - * target page, otherwise we have to calculate pos - * within the cluster and obey the rightmost - * boundary. - */ - if (wc->w_large_pages) { - /* - * For cluster size < page size, we have to - * calculate pos within the cluster and obey - * the rightmost boundary. - */ - bytes = min(bytes, (unsigned long)(osb->s_clustersize - - (wc->w_pos & (osb->s_clustersize - 1)))); - } else { - /* - * cluster size > page size is the most common - * case - we just stay within the target page - * boundary. - */ - bytes = min(bytes, PAGE_CACHE_SIZE - from); - } + *wcp = wc; - to = from + bytes; + return 0; +} - if (wc->w_this_page_new) - ret = ocfs2_map_page_blocks(wc->w_this_page, p_blkno, inode, - cluster_start, cluster_end, 1); - else - ret = ocfs2_map_page_blocks(wc->w_this_page, p_blkno, inode, - from, to, 0); - if (ret) { - mlog_errno(ret); - goto out; - } +/* + * Only called when we have a failure during allocating write to write + * zero's to the newly allocated region. + */ +static void ocfs2_write_failure(struct inode *inode, + struct ocfs2_write_ctxt *wc, + loff_t user_pos, unsigned user_len) +{ + int i; + unsigned from, to; + struct page *tmppage; - BUG_ON(from > PAGE_CACHE_SIZE); - BUG_ON(to > PAGE_CACHE_SIZE); - BUG_ON(from > osb->s_clustersize); - BUG_ON(to > osb->s_clustersize); + page_zero_new_buffers(wc->w_target_page, user_pos, user_len); - dst = kmap(wc->w_this_page); - memcpy(dst + from, bp->b_src_buf + src_from, bytes); - kunmap(wc->w_this_page); + if (wc->w_large_pages) { + from = wc->w_target_from; + to = wc->w_target_to; + } else { + from = 0; + to = PAGE_CACHE_SIZE; + } - /* - * XXX: This is slow, but simple. The caller of - * ocfs2_buffered_write_cluster() is responsible for - * passing through the iovecs, so it's difficult to - * predict what our next step is in here after our - * initial write. A future version should be pushing - * that iovec manipulation further down. - * - * By setting this, we indicate that a copy from user - * data was done, and subsequent calls for this - * cluster will skip copying more data. - */ - wc->w_finished_copy = 1; + for(i = 0; i < wc->w_num_pages; i++) { + tmppage = wc->w_pages[i]; - *ret_from = from; - *ret_to = to; -out: + if (ocfs2_should_order_data(inode)) + walk_page_buffers(wc->w_handle, page_buffers(tmppage), + from, to, NULL, + ocfs2_journal_dirty_data); - return bytes ? (unsigned int)bytes : ret; + block_commit_write(tmppage, from, to); + } } -/* - * Map, fill and write a page to disk. - * - * The work of copying data is done via callback. Newly allocated - * pages which don't take user data will be zero'd (set 'new' to - * indicate an allocating write) - * - * Returns a negative error code or the number of bytes copied into - * the page. - */ -int ocfs2_write_data_page(struct inode *inode, handle_t *handle, - u64 *p_blkno, struct page *page, - struct ocfs2_write_ctxt *wc, int new) +static int ocfs2_prepare_page_for_write(struct inode *inode, u64 *p_blkno, + struct ocfs2_write_ctxt *wc, + struct page *page, u32 cpos, + loff_t user_pos, unsigned user_len, + int new) { - int ret, copied = 0; - unsigned int from = 0, to = 0; + int ret; + unsigned int map_from = 0, map_to = 0; unsigned int cluster_start, cluster_end; - unsigned int zero_from = 0, zero_to = 0; + unsigned int user_data_from = 0, user_data_to = 0; - ocfs2_figure_cluster_boundaries(OCFS2_SB(inode->i_sb), wc->w_cpos, + ocfs2_figure_cluster_boundaries(OCFS2_SB(inode->i_sb), cpos, &cluster_start, &cluster_end); - if ((wc->w_pos >> PAGE_CACHE_SHIFT) == page->index - && !wc->w_finished_copy) { - - wc->w_this_page = page; - wc->w_this_page_new = new; - ret = wc->w_write_data_page(inode, wc, p_blkno, &from, &to); - if (ret < 0) { + if (page == wc->w_target_page) { + map_from = user_pos & (PAGE_CACHE_SIZE - 1); + map_to = map_from + user_len; + + if (new) + ret = ocfs2_map_page_blocks(page, p_blkno, inode, + cluster_start, cluster_end, + new); + else + ret = ocfs2_map_page_blocks(page, p_blkno, inode, + map_from, map_to, new); + if (ret) { mlog_errno(ret); goto out; } - copied = ret; - - zero_from = from; - zero_to = to; + user_data_from = map_from; + user_data_to = map_to; if (new) { - from = cluster_start; - to = cluster_end; + map_from = cluster_start; + map_to = cluster_end; } + + wc->w_target_from = map_from; + wc->w_target_to = map_to; } else { /* * If we haven't allocated the new page yet, we @@ -973,11 +944,11 @@ int ocfs2_write_data_page(struct inode * */ BUG_ON(!new); - from = cluster_start; - to = cluster_end; + map_from = cluster_start; + map_to = cluster_end; ret = ocfs2_map_page_blocks(page, p_blkno, inode, - cluster_start, cluster_end, 1); + cluster_start, cluster_end, new); if (ret) { mlog_errno(ret); goto out; @@ -996,108 +967,84 @@ int ocfs2_write_data_page(struct inode * */ if (new && !PageUptodate(page)) ocfs2_clear_page_regions(page, OCFS2_SB(inode->i_sb), - wc->w_cpos, zero_from, zero_to); + cpos, user_data_from, user_data_to); flush_dcache_page(page); - if (ocfs2_should_order_data(inode)) { - ret = walk_page_buffers(handle, - page_buffers(page), - from, to, NULL, - ocfs2_journal_dirty_data); - if (ret < 0) - mlog_errno(ret); - } - - /* - * We don't use generic_commit_write() because we need to - * handle our own i_size update. - */ - ret = block_commit_write(page, from, to); - if (ret) - mlog_errno(ret); out: - - return copied ? copied : ret; + return ret; } /* - * Do the actual write of some data into an inode. Optionally allocate - * in order to fulfill the write. - * - * cpos is the logical cluster offset within the file to write at - * - * 'phys' is the physical mapping of that offset. a 'phys' value of - * zero indicates that allocation is required. In this case, data_ac - * and meta_ac should be valid (meta_ac can be null if metadata - * allocation isn't required). + * This function will only grab one clusters worth of pages. */ -static ssize_t ocfs2_write(struct file *file, u32 phys, handle_t *handle, - struct buffer_head *di_bh, - struct ocfs2_alloc_context *data_ac, - struct ocfs2_alloc_context *meta_ac, - struct ocfs2_write_ctxt *wc) +static int ocfs2_grab_pages_for_write(struct address_space *mapping, + struct ocfs2_write_ctxt *wc, + u32 cpos, loff_t user_pos, int new) { - int ret, i, numpages = 1, new; - unsigned int copied = 0; - u32 tmp_pos; - u64 v_blkno, p_blkno; - struct address_space *mapping = file->f_mapping; + int ret = 0, i; + unsigned long start, target_index, index; struct inode *inode = mapping->host; - unsigned long index, start; - struct page **cpages; - new = phys == 0 ? 1 : 0; + target_index = user_pos >> PAGE_CACHE_SHIFT; /* * Figure out how many pages we'll be manipulating here. For * non allocating write, we just change the one * page. Otherwise, we'll need a whole clusters worth. */ - if (new) - numpages = ocfs2_pages_per_cluster(inode->i_sb); - - cpages = kzalloc(sizeof(*cpages) * numpages, GFP_NOFS); - if (!cpages) { - ret = -ENOMEM; - mlog_errno(ret); - return ret; - } - - /* - * Fill our page array first. That way we've grabbed enough so - * that we can zero and flush if we error after adding the - * extent. - */ if (new) { - start = ocfs2_align_clusters_to_page_index(inode->i_sb, - wc->w_cpos); - v_blkno = ocfs2_clusters_to_blocks(inode->i_sb, wc->w_cpos); + wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb); + start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos); } else { - start = wc->w_pos >> PAGE_CACHE_SHIFT; - v_blkno = wc->w_pos >> inode->i_sb->s_blocksize_bits; + wc->w_num_pages = 1; + start = target_index; } - for(i = 0; i < numpages; i++) { + for(i = 0; i < wc->w_num_pages; i++) { index = start + i; - cpages[i] = grab_cache_page(mapping, index); - if (!cpages[i]) { + wc->w_pages[i] = grab_cache_page(mapping, index); + if (!wc->w_pages[i]) { ret = -ENOMEM; mlog_errno(ret); goto out; } + + if (index == target_index) + wc->w_target_page = wc->w_pages[i]; } +out: + return ret; +} + +/* + * Prepare a single cluster for write one cluster into the file. + */ +static int ocfs2_write_cluster(struct address_space *mapping, + u32 phys, struct ocfs2_alloc_context *data_ac, + struct ocfs2_alloc_context *meta_ac, + struct ocfs2_write_ctxt *wc, u32 cpos, + loff_t user_pos, unsigned user_len) +{ + int ret, i, new; + u64 v_blkno, p_blkno; + struct inode *inode = mapping->host; + + new = phys == 0 ? 1 : 0; if (new) { + u32 tmp_pos; + /* * This is safe to call with the page locks - it won't take * any additional semaphores or cluster locks. */ - tmp_pos = wc->w_cpos; + tmp_pos = cpos; ret = ocfs2_do_extend_allocation(OCFS2_SB(inode->i_sb), inode, - &tmp_pos, 1, di_bh, handle, - data_ac, meta_ac, NULL); + &tmp_pos, 1, wc->w_di_bh, + wc->w_handle, data_ac, + meta_ac, NULL); /* * This shouldn't happen because we must have already * calculated the correct meta data allocation required. The @@ -1114,103 +1061,132 @@ static ssize_t ocfs2_write(struct file * mlog_errno(ret); goto out; } + + v_blkno = ocfs2_clusters_to_blocks(inode->i_sb, cpos); + } else { + v_blkno = user_pos >> inode->i_sb->s_blocksize_bits; } + /* + * The only reason this should fail is due to an inability to + * find the extent added. + */ ret = ocfs2_extent_map_get_blocks(inode, v_blkno, &p_blkno, NULL, NULL); if (ret < 0) { - - /* - * XXX: Should we go readonly here? - */ - - mlog_errno(ret); + ocfs2_error(inode->i_sb, "Corrupting extend for inode %llu, " + "at logical block %llu", + (unsigned long long)OCFS2_I(inode)->ip_blkno, + (unsigned long long)v_blkno); goto out; } BUG_ON(p_blkno == 0); - for(i = 0; i < numpages; i++) { - ret = ocfs2_write_data_page(inode, handle, &p_blkno, cpages[i], - wc, new); - if (ret < 0) { - mlog_errno(ret); - goto out; - } + for(i = 0; i < wc->w_num_pages; i++) { + int tmpret; - copied += ret; + tmpret = ocfs2_prepare_page_for_write(inode, &p_blkno, wc, + wc->w_pages[i], cpos, + user_pos, user_len, new); + if (tmpret) { + mlog_errno(tmpret); + if (ret == 0) + tmpret = ret; + } } + /* + * We only have cleanup to do in case of allocating write. + */ + if (ret && new) + ocfs2_write_failure(inode, wc, user_pos, user_len); + out: - for(i = 0; i < numpages; i++) { - unlock_page(cpages[i]); - mark_page_accessed(cpages[i]); - page_cache_release(cpages[i]); - } - kfree(cpages); - return copied ? copied : ret; + return ret; } -static void ocfs2_write_ctxt_init(struct ocfs2_write_ctxt *wc, - struct ocfs2_super *osb, loff_t pos, - size_t count, ocfs2_page_writer *cb, - void *cb_priv) +/* + * ocfs2_write_end() wants to know which parts of the target page it + * should complete the write on. It's easiest to compute them ahead of + * time when a more complete view of the write is available. + */ +static void ocfs2_set_target_boundaries(struct ocfs2_super *osb, + struct ocfs2_write_ctxt *wc, + loff_t pos, unsigned len, int alloc) { - wc->w_count = count; - wc->w_pos = pos; - wc->w_cpos = wc->w_pos >> osb->s_clustersize_bits; - wc->w_finished_copy = 0; + struct ocfs2_write_cluster_desc *desc; - if (unlikely(PAGE_CACHE_SHIFT > osb->s_clustersize_bits)) - wc->w_large_pages = 1; - else - wc->w_large_pages = 0; + wc->w_target_from = pos & (PAGE_CACHE_SIZE - 1); + wc->w_target_to = wc->w_target_from + len; + + if (alloc == 0) + return; + + /* + * Allocating write - we may have different boundaries based + * on page size and cluster size. + * + * NOTE: We can no longer compute one value from the other as + * the actual write length and user provided length may be + * different. + */ - wc->w_write_data_page = cb; - wc->w_private = cb_priv; + if (wc->w_large_pages) { + /* + * We only care about the 1st and last cluster within + * our range and whether they are holes or not. Either + * value may be extended out to the start/end of a + * newly allocated cluster. + */ + desc = &wc->w_desc[0]; + if (desc->c_new) + ocfs2_figure_cluster_boundaries(osb, + desc->c_cpos, + &wc->w_target_from, + NULL); + + desc = &wc->w_desc[wc->w_clen - 1]; + if (desc->c_new) + ocfs2_figure_cluster_boundaries(osb, + desc->c_cpos, + NULL, + &wc->w_target_to); + } else { + wc->w_target_from = 0; + wc->w_target_to = PAGE_CACHE_SIZE; + } } -/* - * Write a cluster to an inode. The cluster may not be allocated yet, - * in which case it will be. This only exists for buffered writes - - * O_DIRECT takes a more "traditional" path through the kernel. - * - * The caller is responsible for incrementing pos, written counts, etc - * - * For file systems that don't support sparse files, pre-allocation - * and page zeroing up until cpos should be done prior to this - * function call. - * - * Callers should be holding i_sem, and the rw cluster lock. - * - * Returns the number of user bytes written, or less than zero for - * error. - */ -ssize_t ocfs2_buffered_write_cluster(struct file *file, loff_t pos, - size_t count, ocfs2_page_writer *actor, - void *priv) +static int ocfs2_write_begin(struct file *file, struct address_space *mapping, + loff_t pos, unsigned len, unsigned flags, + struct page **pagep, void **fsdata) { - int ret, credits = OCFS2_INODE_UPDATE_CREDITS; - ssize_t written = 0; - u32 phys; - struct inode *inode = file->f_mapping->host; + int ret, i, credits = OCFS2_INODE_UPDATE_CREDITS; + unsigned int num_clusters = 0, clusters_to_alloc = 0; + u32 phys = 0; + struct ocfs2_write_ctxt *wc; + struct inode *inode = mapping->host; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - struct buffer_head *di_bh = NULL; struct ocfs2_dinode *di; struct ocfs2_alloc_context *data_ac = NULL; struct ocfs2_alloc_context *meta_ac = NULL; handle_t *handle; - struct ocfs2_write_ctxt wc; + struct ocfs2_write_cluster_desc *desc; - ocfs2_write_ctxt_init(&wc, osb, pos, count, actor, priv); + ret = ocfs2_alloc_write_ctxt(&wc, osb, pos, len); + if (ret) { + mlog_errno(ret); + return ret; + } - ret = ocfs2_meta_lock(inode, &di_bh, 1); + ret = ocfs2_meta_lock(inode, &wc->w_di_bh, 1); if (ret) { mlog_errno(ret); goto out; } - di = (struct ocfs2_dinode *)di_bh->b_data; + di = (struct ocfs2_dinode *)wc->w_di_bh->b_data; /* * Take alloc sem here to prevent concurrent lookups. That way @@ -1221,23 +1197,60 @@ ssize_t ocfs2_buffered_write_cluster(str */ down_write(&OCFS2_I(inode)->ip_alloc_sem); - ret = ocfs2_get_clusters(inode, wc.w_cpos, &phys, NULL, NULL); - if (ret) { - mlog_errno(ret); - goto out_meta; + for (i = 0; i < wc->w_clen; i++) { + desc = &wc->w_desc[i]; + desc->c_cpos = wc->w_cpos + i; + + if (num_clusters == 0) { + ret = ocfs2_get_clusters(inode, desc->c_cpos, &phys, + &num_clusters, NULL); + if (ret) { + mlog_errno(ret); + goto out_meta; + } + } else if (phys) { + /* + * Only increment phys if it doesn't describe + * a hole. + */ + phys++; + } + + desc->c_phys = phys; + if (phys == 0) { + desc->c_new = 1; + clusters_to_alloc++; + } + + num_clusters--; } - /* phys == 0 means that allocation is required. */ - if (phys == 0) { - ret = ocfs2_lock_allocators(inode, di, 1, &data_ac, &meta_ac); + /* + * We set w_target_from, w_target_to here so that + * ocfs2_write_end() knows which range in the target page to + * write out. An allocation requires that we write the entire + * cluster range. + */ + if (clusters_to_alloc > 0) { + /* + * XXX: We are stretching the limits of + * ocfs2_lock_allocators(). It greately over-estimates + * the work to be done. + */ + ret = ocfs2_lock_allocators(inode, di, clusters_to_alloc, + &data_ac, &meta_ac); if (ret) { mlog_errno(ret); goto out_meta; } - credits = ocfs2_calc_extend_credits(inode->i_sb, di, 1); + credits = ocfs2_calc_extend_credits(inode->i_sb, di, + clusters_to_alloc); + } + ocfs2_set_target_boundaries(osb, wc, pos, len, clusters_to_alloc); + ret = ocfs2_data_lock(inode, 1); if (ret) { mlog_errno(ret); @@ -1251,36 +1264,50 @@ ssize_t ocfs2_buffered_write_cluster(str goto out_data; } - written = ocfs2_write(file, phys, handle, di_bh, data_ac, - meta_ac, &wc); - if (written < 0) { - ret = written; + wc->w_handle = handle; + + /* + * We don't want this to fail in ocfs2_write_end(), so do it + * here. + */ + ret = ocfs2_journal_access(handle, inode, wc->w_di_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret) { mlog_errno(ret); goto out_commit; } - ret = ocfs2_journal_access(handle, inode, di_bh, - OCFS2_JOURNAL_ACCESS_WRITE); + /* + * Fill our page array first. That way we've grabbed enough so + * that we can zero and flush if we error after adding the + * extent. + */ + ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, + clusters_to_alloc); if (ret) { mlog_errno(ret); - goto out_commit; + goto out; } - pos += written; - if (pos > inode->i_size) { - i_size_write(inode, pos); - mark_inode_dirty(inode); + for (i = 0; i < wc->w_clen; i++) { + desc = &wc->w_desc[i]; + + ret = ocfs2_write_cluster(mapping, desc->c_phys, data_ac, + meta_ac, wc, desc->c_cpos, pos, len); + if (ret) { + mlog_errno(ret); + goto out_commit; + } } - inode->i_blocks = ocfs2_inode_sector_count(inode); - di->i_size = cpu_to_le64((u64)i_size_read(inode)); - inode->i_mtime = inode->i_ctime = CURRENT_TIME; - di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec); - di->i_mtime_nsec = di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec); - ret = ocfs2_journal_dirty(handle, di_bh); - if (ret) - mlog_errno(ret); + if (data_ac) + ocfs2_free_alloc_context(data_ac); + if (meta_ac) + ocfs2_free_alloc_context(meta_ac); + *pagep = wc->w_target_page; + *fsdata = wc; + return 0; out_commit: ocfs2_commit_trans(osb, handle); @@ -1292,18 +1319,92 @@ out_meta: ocfs2_meta_unlock(inode, 1); out: - brelse(di_bh); + ocfs2_free_write_ctxt(wc); + if (data_ac) ocfs2_free_alloc_context(data_ac); if (meta_ac) ocfs2_free_alloc_context(meta_ac); + return ret; +} + +static int ocfs2_write_end(struct file *file, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata) +{ + int i; + unsigned from, to, start = pos & (PAGE_CACHE_SIZE - 1); + struct inode *inode = mapping->host; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + struct ocfs2_write_ctxt *wc = fsdata; + struct ocfs2_dinode *di = (struct ocfs2_dinode *)wc->w_di_bh->b_data; + handle_t *handle = wc->w_handle; + struct page *tmppage; + + if (unlikely(copied < len)) { + if (!PageUptodate(wc->w_target_page)) + copied = 0; + + page_zero_new_buffers(wc->w_target_page, start+copied, + start+len); + } + flush_dcache_page(wc->w_target_page); + + for(i = 0; i < wc->w_num_pages; i++) { + tmppage = wc->w_pages[i]; + + if (tmppage == wc->w_target_page) { + from = wc->w_target_from; + to = wc->w_target_to; + + BUG_ON(from > PAGE_CACHE_SIZE || + to > PAGE_CACHE_SIZE || + to < from); + } else { + /* + * Pages adjacent to the target (if any) imply + * a hole-filling write in which case we want + * to flush their entire range. + */ + from = 0; + to = PAGE_CACHE_SIZE; + } + + if (ocfs2_should_order_data(inode)) + walk_page_buffers(wc->w_handle, page_buffers(tmppage), + from, to, NULL, + ocfs2_journal_dirty_data); + + block_commit_write(tmppage, from, to); + } + + pos += copied; + if (pos > inode->i_size) { + i_size_write(inode, pos); + mark_inode_dirty(inode); + } + inode->i_blocks = ocfs2_inode_sector_count(inode); + di->i_size = cpu_to_le64((u64)i_size_read(inode)); + inode->i_mtime = inode->i_ctime = CURRENT_TIME; + di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec); + di->i_mtime_nsec = di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec); + + ocfs2_journal_dirty(handle, wc->w_di_bh); + + ocfs2_commit_trans(osb, handle); + ocfs2_data_unlock(inode, 1); + up_write(&OCFS2_I(inode)->ip_alloc_sem); + ocfs2_meta_unlock(inode, 1); + ocfs2_free_write_ctxt(wc); - return written ? written : ret; + return copied; } const struct address_space_operations ocfs2_aops = { .readpage = ocfs2_readpage, .writepage = ocfs2_writepage, + .write_begin = ocfs2_write_begin, + .write_end = ocfs2_write_end, .bmap = ocfs2_bmap, .sync_page = block_sync_page, .direct_IO = ocfs2_direct_IO, diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h index 1b4ba53..62dd35b 100644 --- a/fs/ocfs2/aops.h +++ b/fs/ocfs2/aops.h @@ -42,58 +42,6 @@ int walk_page_buffers( handle_t *handle, int (*fn)( handle_t *handle, struct buffer_head *bh)); -struct ocfs2_write_ctxt; -typedef int (ocfs2_page_writer)(struct inode *, struct ocfs2_write_ctxt *, - u64 *, unsigned int *, unsigned int *); - -ssize_t ocfs2_buffered_write_cluster(struct file *file, loff_t pos, - size_t count, ocfs2_page_writer *actor, - void *priv); - -struct ocfs2_write_ctxt { - size_t w_count; - loff_t w_pos; - u32 w_cpos; - unsigned int w_finished_copy; - - /* This is true if page_size > cluster_size */ - unsigned int w_large_pages; - - /* Filler callback and private data */ - ocfs2_page_writer *w_write_data_page; - void *w_private; - - /* Only valid for the filler callback */ - struct page *w_this_page; - unsigned int w_this_page_new; -}; - -struct ocfs2_buffered_write_priv { - char *b_src_buf; - const struct iovec *b_cur_iov; /* Current iovec */ - size_t b_cur_off; /* Offset in the - * current iovec */ -}; -int ocfs2_map_and_write_user_data(struct inode *inode, - struct ocfs2_write_ctxt *wc, - u64 *p_blkno, - unsigned int *ret_from, - unsigned int *ret_to); - -struct ocfs2_splice_write_priv { - struct splice_desc *s_sd; - struct pipe_buffer *s_buf; - struct pipe_inode_info *s_pipe; - /* Neither offset value is ever larger than one page */ - unsigned int s_offset; - unsigned int s_buf_offset; -}; -int ocfs2_map_and_write_splice_data(struct inode *inode, - struct ocfs2_write_ctxt *wc, - u64 *p_blkno, - unsigned int *ret_from, - unsigned int *ret_to); - /* all ocfs2_dio_end_io()'s fault */ #define ocfs2_iocb_is_rw_locked(iocb) \ test_bit(0, (unsigned long *)&iocb->private) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 24a7854..c67c1be 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1306,116 +1306,6 @@ out: return ret; } -static inline void -ocfs2_set_next_iovec(const struct iovec **iovp, size_t *basep, size_t bytes) -{ - const struct iovec *iov = *iovp; - size_t base = *basep; - - do { - int copy = min(bytes, iov->iov_len - base); - - bytes -= copy; - base += copy; - if (iov->iov_len == base) { - iov++; - base = 0; - } - } while (bytes); - *iovp = iov; - *basep = base; -} - -static struct page * ocfs2_get_write_source(struct ocfs2_buffered_write_priv *bp, - const struct iovec *cur_iov, - size_t iov_offset) -{ - int ret; - char *buf; - struct page *src_page = NULL; - - buf = cur_iov->iov_base + iov_offset; - - if (!segment_eq(get_fs(), KERNEL_DS)) { - /* - * Pull in the user page. We want to do this outside - * of the meta data locks in order to preserve locking - * order in case of page fault. - */ - ret = get_user_pages(current, current->mm, - (unsigned long)buf & PAGE_CACHE_MASK, 1, - 0, 0, &src_page, NULL); - if (ret == 1) - bp->b_src_buf = kmap(src_page); - else - src_page = ERR_PTR(-EFAULT); - } else { - bp->b_src_buf = buf; - } - - return src_page; -} - -static void ocfs2_put_write_source(struct ocfs2_buffered_write_priv *bp, - struct page *page) -{ - if (page) { - kunmap(page); - page_cache_release(page); - } -} - -static ssize_t ocfs2_file_buffered_write(struct file *file, loff_t *ppos, - const struct iovec *iov, - unsigned long nr_segs, - size_t count, - ssize_t o_direct_written) -{ - int ret = 0; - ssize_t copied, total = 0; - size_t iov_offset = 0; - const struct iovec *cur_iov = iov; - struct ocfs2_buffered_write_priv bp; - struct page *page; - - /* - * handle partial DIO write. Adjust cur_iov if needed. - */ - ocfs2_set_next_iovec(&cur_iov, &iov_offset, o_direct_written); - - do { - bp.b_cur_off = iov_offset; - bp.b_cur_iov = cur_iov; - - page = ocfs2_get_write_source(&bp, cur_iov, iov_offset); - if (IS_ERR(page)) { - ret = PTR_ERR(page); - goto out; - } - - copied = ocfs2_buffered_write_cluster(file, *ppos, count, - ocfs2_map_and_write_user_data, - &bp); - - ocfs2_put_write_source(&bp, page); - - if (copied < 0) { - mlog_errno(copied); - ret = copied; - goto out; - } - - total += copied; - *ppos = *ppos + copied; - count -= copied; - - ocfs2_set_next_iovec(&cur_iov, &iov_offset, copied); - } while(count); - -out: - return total ? total : ret; -} - static int ocfs2_check_iovec(const struct iovec *iov, size_t *counted, unsigned long *nr_segs) { @@ -1452,7 +1342,7 @@ static ssize_t ocfs2_file_aio_write(stru loff_t pos) { int ret, direct_io, appending, rw_level, have_alloc_sem = 0; - int can_do_direct, sync = 0; + int can_do_direct; ssize_t written = 0; size_t ocount; /* original count */ size_t count; /* after file limit checks */ @@ -1468,12 +1358,6 @@ static ssize_t ocfs2_file_aio_write(stru if (iocb->ki_left == 0) return 0; - ret = ocfs2_check_iovec(iov, &ocount, &nr_segs); - if (ret) - return ret; - - count = ocount; - vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE); appending = file->f_flags & O_APPEND ? 1 : 0; @@ -1517,33 +1401,22 @@ relock: rw_level = -1; direct_io = 0; - sync = 1; goto relock; } - if (!sync && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) - sync = 1; - - /* - * XXX: Is it ok to execute these checks a second time? - */ - ret = generic_write_checks(file, ppos, &count, S_ISBLK(inode->i_mode)); - if (ret) - goto out; - - /* - * Set pos so that sync_page_range_nolock() below understands - * where to start from. We might've moved it around via the - * calls above. The range we want to actually sync starts from - * *ppos here. - * - */ - pos = *ppos; - /* communicate with ocfs2_dio_end_io */ ocfs2_iocb_set_rw_locked(iocb); if (direct_io) { + ret = ocfs2_check_iovec(iov, &ocount, &nr_segs); + if (ret) + goto out_dio; + + ret = generic_write_checks(file, ppos, &count, + S_ISBLK(inode->i_mode)); + if (ret) + goto out_dio; + written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, ppos, count, ocount); if (written < 0) { @@ -1551,14 +1424,8 @@ relock: goto out_dio; } } else { - written = ocfs2_file_buffered_write(file, ppos, iov, nr_segs, - count, written); - if (written < 0) { - ret = written; - if (ret != -EFAULT || ret != -ENOSPC) - mlog_errno(ret); - goto out; - } + written = generic_file_aio_write_nolock(iocb, iov, nr_segs, + *ppos); } out_dio: @@ -1588,98 +1455,12 @@ out_sems: if (have_alloc_sem) up_read(&inode->i_alloc_sem); - if (written > 0 && sync) { - ssize_t err; - - err = sync_page_range_nolock(inode, file->f_mapping, pos, count); - if (err < 0) - written = err; - } - mutex_unlock(&inode->i_mutex); mlog_exit(ret); return written ? written : ret; } -static int ocfs2_splice_write_actor(struct pipe_inode_info *pipe, - struct pipe_buffer *buf, - struct splice_desc *sd) -{ - int ret, count, total = 0; - ssize_t copied = 0; - struct ocfs2_splice_write_priv sp; - - ret = buf->ops->pin(pipe, buf); - if (ret) - goto out; - - sp.s_sd = sd; - sp.s_buf = buf; - sp.s_pipe = pipe; - sp.s_offset = sd->pos & ~PAGE_CACHE_MASK; - sp.s_buf_offset = buf->offset; - - count = sd->len; - if (count + sp.s_offset > PAGE_CACHE_SIZE) - count = PAGE_CACHE_SIZE - sp.s_offset; - - do { - /* - * splice wants us to copy up to one page at a - * time. For pagesize > cluster size, this means we - * might enter ocfs2_buffered_write_cluster() more - * than once, so keep track of our progress here. - */ - copied = ocfs2_buffered_write_cluster(sd->file, - (loff_t)sd->pos + total, - count, - ocfs2_map_and_write_splice_data, - &sp); - if (copied < 0) { - mlog_errno(copied); - ret = copied; - goto out; - } - - count -= copied; - sp.s_offset += copied; - sp.s_buf_offset += copied; - total += copied; - } while (count); - - ret = 0; -out: - - return total ? total : ret; -} - -static ssize_t __ocfs2_file_splice_write(struct pipe_inode_info *pipe, - struct file *out, - loff_t *ppos, - size_t len, - unsigned int flags) -{ - int ret, err; - struct address_space *mapping = out->f_mapping; - struct inode *inode = mapping->host; - - ret = __splice_from_pipe(pipe, out, ppos, len, flags, - ocfs2_splice_write_actor); - if (ret > 0) { - *ppos += ret; - - if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { - err = generic_osync_inode(inode, mapping, - OSYNC_METADATA|OSYNC_DATA); - if (err) - ret = err; - } - } - - return ret; -} - static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, @@ -1709,8 +1490,7 @@ static ssize_t ocfs2_file_splice_write(s goto out_unlock; } - /* ok, we're done with i_size and alloc work */ - ret = __ocfs2_file_splice_write(pipe, out, ppos, len, flags); + ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags); out_unlock: ocfs2_rw_unlock(inode, 1); -- 1.3.3 - To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
