Re: impact of 4k sector size on the IO & FS stack

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Alan Cox wrote:
I would be interested to know what the disk vendors intend to use as
their strategy when (with ATA) they have a 512 byte write from an older
file system/setup into a 4K block. The case where errors magically appear

Well, you have logical and physical sector size changes.

First generation of 1K sector drives will continue to use the same 512-byte ATA sector size you are familiar with. A single 512-byte write will cause the drive to perform a read-modify-write cycle. This configuration is physical 1K sector, logical 512b sector.

A future configuration will change the logical ATA interface away from 512-byte sectors to 1K or 4K. Here, it is impossible to read a quantity smaller than 1K or 4K, whatever the sector size is.

	Jeff


-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux