[PATCH] dlm/gfs2: indent help text

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>

Indent help text as expected.

Signed-off-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
---
 fs/dlm/Kconfig  |   16 ++++++++--------
 fs/gfs2/Kconfig |   47 +++++++++++++++++++++++------------------------
 2 files changed, 31 insertions(+), 32 deletions(-)

--- linux-2620-rc6.orig/fs/dlm/Kconfig
+++ linux-2620-rc6/fs/dlm/Kconfig
@@ -7,17 +7,17 @@ config DLM
 	select CONFIGFS_FS
 	select IP_SCTP if DLM_SCTP
 	help
-	A general purpose distributed lock manager for kernel or userspace
-	applications.
+	  A general purpose distributed lock manager for kernel or userspace
+	  applications.
 
 choice
 	prompt "Select DLM communications protocol"
 	depends on DLM
 	default DLM_TCP
 	help
-	The DLM Can use TCP or SCTP for it's network communications.
-	SCTP supports multi-homed operations whereas TCP doesn't.
-	However, SCTP seems to have stability problems at the moment.
+	  The DLM Can use TCP or SCTP for it's network communications.
+	  SCTP supports multi-homed operations whereas TCP doesn't.
+	  However, SCTP seems to have stability problems at the moment.
 
 config DLM_TCP
 	bool "TCP/IP"
@@ -31,8 +31,8 @@ config DLM_DEBUG
 	bool "DLM debugging"
 	depends on DLM
 	help
-	Under the debugfs mount point, the name of each lockspace will
-	appear as a file in the "dlm" directory.  The output is the
-	list of resource and locks the local node knows about.
+	  Under the debugfs mount point, the name of each lockspace will
+	  appear as a file in the "dlm" directory.  The output is the
+	  list of resource and locks the local node knows about.
 
 endmenu
--- linux-2620-rc6.orig/fs/gfs2/Kconfig
+++ linux-2620-rc6/fs/gfs2/Kconfig
@@ -4,33 +4,33 @@ config GFS2_FS
 	select FS_POSIX_ACL
 	select CRC32
 	help
-	A cluster filesystem.
+	  A cluster filesystem.
 
-	Allows a cluster of computers to simultaneously use a block device
-	that is shared between them (with FC, iSCSI, NBD, etc...).  GFS reads
-	and writes to the block device like a local filesystem, but also uses
-	a lock module to allow the computers coordinate their I/O so
-	filesystem consistency is maintained.  One of the nifty features of
-	GFS is perfect consistency -- changes made to the filesystem on one
-	machine show up immediately on all other machines in the cluster.
-
-	To use the GFS2 filesystem, you will need to enable one or more of
-	the below locking modules. Documentation and utilities for GFS2 can
-	be found here: http://sources.redhat.com/cluster
+	  Allows a cluster of computers to simultaneously use a block device
+	  that is shared between them (with FC, iSCSI, NBD, etc...).  GFS reads
+	  and writes to the block device like a local filesystem, but also uses
+	  a lock module to allow the computers coordinate their I/O so
+	  filesystem consistency is maintained.  One of the nifty features of
+	  GFS is perfect consistency -- changes made to the filesystem on one
+	  machine show up immediately on all other machines in the cluster.
+
+	  To use the GFS2 filesystem, you will need to enable one or more of
+	  the below locking modules. Documentation and utilities for GFS2 can
+	  be found here: http://sources.redhat.com/cluster
 
 config GFS2_FS_LOCKING_NOLOCK
 	tristate "GFS2 \"nolock\" locking module"
 	depends on GFS2_FS
 	help
-	Single node locking module for GFS2.
+	  Single node locking module for GFS2.
 
-	Use this module if you want to use GFS2 on a single node without
-	its clustering features. You can still take advantage of the
-	large file support, and upgrade to running a full cluster later on
-	if required.
+	  Use this module if you want to use GFS2 on a single node without
+	  its clustering features. You can still take advantage of the
+	  large file support, and upgrade to running a full cluster later on
+	  if required.
 
-	If you will only be using GFS2 in cluster mode, you do not need this
-	module.
+	  If you will only be using GFS2 in cluster mode, you do not need this
+	  module.
 
 config GFS2_FS_LOCKING_DLM
 	tristate "GFS2 DLM locking module"
@@ -39,9 +39,8 @@ config GFS2_FS_LOCKING_DLM
 	select CONFIGFS_FS
 	select DLM
 	help
-	Multiple node locking module for GFS2
-
-	Most users of GFS2 will require this module. It provides the locking
-	interface between GFS2 and the DLM, which is required to use GFS2
-	in a cluster environment.
+	  Multiple node locking module for GFS2
 
+	  Most users of GFS2 will require this module. It provides the locking
+	  interface between GFS2 and the DLM, which is required to use GFS2
+	  in a cluster environment.
-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux