Begin forwarded message: Date: 04 Apr 2006 01:18:44 -0400 From: Greg Stark <gsstark@xxxxxxx> To: linux-kernel <linux-kernel@xxxxxxxxxxxxxxx> Subject: atyfb doesn't work for me When I try to load atyfb I get messages about "unsupported xclk source" and "vclk out of range" and the fb devices don't seem to be active. That is, fbset -fb /dev/fb? all say "no such device" I see there are module parameters to override some of these settings but I'm not clear where I would find the correct values to use. And surely the fb driver ought to be able to come up usable values on its own? [ 25.724880] PCI: Enabling device 0000:02:0b.0 (0080 -> 0083) [ 25.724943] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 25.725047] atyfb: using auxiliary register aperture [ 25.725125] atyfb: 3D RAGE II (Mach64 GT) [0x4754 rev 0x41] [ 25.725176] atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000. [ 25.725228] atyfb: BIOS frequency table: [ 25.725281] atyfb: PCLK_min_freq 26465, PCLK_max_freq 24930, ref_freq 11829, ref_divider 12902 [ 25.725337] atyfb: MCLK_pwd 12598, MCLK_max_freq 8241, XCLK_max_freq 22016, SCLK_freq 13619 [ 25.725418] atyfb: 512K SDRAM (1:1), 14.31818 MHz XTAL, 249 MHz PLL, 82 Mhz MCLK, 220 MHz XCLK [ 25.725473] atyfb: Unsupported xclk source: 5. [ 25.725654] atyfb: vclk out of range [ 25.725703] atyfb: can't set default video mode [ 25.762829] PCI: Enabling device 0000:02:0c.0 (0080 -> 0083) [ 25.762882] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 25.762965] atyfb: using auxiliary register aperture [ 25.763020] atyfb: 3D RAGE II+ (Mach64 GU) [0x4755 rev 0x9a] [ 25.763065] atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000. [ 25.763109] atyfb: BIOS frequency table: [ 25.763150] atyfb: PCLK_min_freq 26465, PCLK_max_freq 24930, ref_freq 11829, ref_divider 12902 [ 25.763201] atyfb: MCLK_pwd 12598, MCLK_max_freq 8241, XCLK_max_freq 22016, SCLK_freq 13619 [ 25.763276] atyfb: 512K RESV, 14.31818 MHz XTAL, 249 MHz PLL, 82 Mhz MCLK, 220 MHz XCLK [ 25.763326] atyfb: Unsupported xclk source: 5. [ 25.763496] atyfb: vclk out of range [ 25.763541] atyfb: can't set default video mode -- greg - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
