On Sat, Jul 08, 2023 at 12:23:05AM -0400, Paul Moore wrote: > On Jun 28, 2023 Fan Wu <wufan@xxxxxxxxxxxxxxxxxxx> wrote: > > > > Users of IPE require a way to identify when and why an operation fails, > > allowing them to both respond to violations of policy and be notified > > of potentially malicious actions on their systems with respect to IPE > > itself. > > > > This patch introduces 3 new audit events. > > > > AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation > > of a resource. > > AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy > > has been changed to another loaded policy. > > AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded > > into the kernel. > > > > This patch also adds support for success auditing, allowing users to > > identify why an allow decision was made for a resource. However, it is > > recommended to use this option with caution, as it is quite noisy. > > > > Here are some examples of the new audit record types: > > > > AUDIT_IPE_ACCESS(1420): > > > > audit: AUDIT1420 path="/root/vol/bin/hello" dev="sda" > > ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW" > > The 'dev' field is already in use by audit, and is used to log the > device major and minor numbers, see audit_log_name() for an example. > > I would suggest adopting the existing 'dev' field format, but if you > really want to log the device name as a string you will need to find > another audit field name. > Actually it was copied from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/security/lsm_audit.c#n228 Personally I think using device name is better, I will try to add a new field. > > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > > ino=2 rule="DEFAULT action=DENY" > > > > audit: AUDIT1420 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs" > > ino=131 rule="DEFAULT action=DENY" > > > > The above three records were generated when the active IPE policy only > > allows binaries from the initial booted drive(sda) to run. The three > > identical `hello` binary were placed at different locations, only the > > first hello from sda was allowed. > > > > Field path followed by the file's path name. > > > > Field dev followed by the device name as found in /dev where the file is > > from. > > Note that for device mappers it will use the name `dm-X` instead of > > the name in /dev/mapper. > > For a file in a temp file system, which is not from a device, it will use > > `tmpfs` for the field. > > The implementation of this part is following another existing use case > > LSM_AUDIT_DATA_INODE in security/lsm_audit.c > > > > Field ino followed by the file's inode number. > > > > Field rule followed by the IPE rule made the access decision. The whole > > rule must be audited because the decision is based on the combination of > > all property conditions in the rule. > > > > Along with the syscall audit event, user can know why a blocked > > happened. For example: > > > > audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0" > > ino=2 rule="DEFAULT action=DENY" > > audit[1956]: SYSCALL arch=c000003e syscall=59 > > success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0 > > a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0 > > gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 > > ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null) > > > > The above two records showed bash used execve to run "hello" and got > > blocked by IPE. Note that the IPE records are always prior to a SYSCALL > > record. > > > > AUDIT_IPE_CONFIG_CHANGE(1421): > > > > audit: AUDIT1421 > > old_active_pol_name="Allow_All" old_active_pol_version=0.0.0 > > old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855 > > new_active_pol_name="boot_verified" new_active_pol_version=0.0.0 > > new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > > auid=4294967295 ses=4294967295 lsm=ipe res=1 > > You can trim hash digest strings so they better fit in terminals, for > example: > > old_policy_digest=sha256:E3B0C44.... > Do you mean I could trim it in the documentation and for the real audit record I still record the whole hash? > > The above record showed the current IPE active policy switch from > > `Allow_All` to `boot_verified` along with the version and the hash > > digest of the two policies. Note IPE can only have one policy active > > at a time, all access decision evaluation is based on the current active > > policy. > > The normal procedure to deploy a policy is loading the policy to deploy > > into the kernel first, then switch the active policy to it. > > > > AUDIT_IPE_POLICY_LOAD(1422): > > > > audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0 > > policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB > > auid=4294967295 ses=4294967295 lsm=ipe res=1 > > > > The above record showed a new policy has been loaded into the kernel > > with the policy name, policy version and policy hash. > > > > Signed-off-by: Deven Bowers <deven.desai@xxxxxxxxxxxxxxxxxxx> > > Signed-off-by: Fan Wu <wufan@xxxxxxxxxxxxxxxxxxx> > > --- > > include/uapi/linux/audit.h | 3 + > > security/ipe/Kconfig | 2 +- > > security/ipe/Makefile | 1 + > > security/ipe/audit.c | 197 +++++++++++++++++++++++++++++++++++++ > > security/ipe/audit.h | 18 ++++ > > security/ipe/eval.c | 26 ++++- > > security/ipe/eval.h | 8 ++ > > security/ipe/fs.c | 71 +++++++++++++ > > security/ipe/policy.c | 5 + > > 9 files changed, 327 insertions(+), 4 deletions(-) > > create mode 100644 security/ipe/audit.c > > create mode 100644 security/ipe/audit.h > > ... > > > diff --git a/security/ipe/audit.c b/security/ipe/audit.c > > new file mode 100644 > > index 000000000000..d3f78a7fc93f > > --- /dev/null > > +++ b/security/ipe/audit.c > > @@ -0,0 +1,197 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) Microsoft Corporation. All rights reserved. > > + */ > > + > > +#include <linux/slab.h> > > +#include <linux/audit.h> > > +#include <linux/types.h> > > +#include <crypto/hash.h> > > + > > +#include "ipe.h" > > +#include "eval.h" > > +#include "hooks.h" > > +#include "policy.h" > > +#include "audit.h" > > + > > +#define ACTSTR(x) ((x) == __IPE_ACTION_ALLOW ? "ALLOW" : "DENY") > > + > > +#define IPE_AUDIT_HASH_ALG "sha256" > > + > > +#define AUDIT_POLICY_LOAD_FMT "policy_name=\"%s\" policy_version=%hu.%hu.%hu "\ > > + "policy_digest=" IPE_AUDIT_HASH_ALG ":" > > +#define AUDIT_OLD_ACTIVE_POLICY_FMT "old_active_pol_name=\"%s\" "\ > > + "old_active_pol_version=%hu.%hu.%hu "\ > > + "old_policy_digest=" IPE_AUDIT_HASH_ALG ":" > > +#define AUDIT_NEW_ACTIVE_POLICY_FMT "new_active_pol_name=\"%s\" "\ > > + "new_active_pol_version=%hu.%hu.%hu "\ > > + "new_policy_digest=" IPE_AUDIT_HASH_ALG ":" > > + > > +static const char *const audit_op_names[__IPE_OP_MAX] = { > > + "EXECUTE", > > + "FIRMWARE", > > + "KMODULE", > > + "KEXEC_IMAGE", > > + "KEXEC_INITRAMFS", > > + "IMA_POLICY", > > + "IMA_X509_CERT", > > +}; > > + > > +static const char *const audit_prop_names[__IPE_PROP_MAX] = { > > + "boot_verified=FALSE", > > + "boot_verified=TRUE", > > +}; > > + > > +/** > > + * audit_rule - audit an IPE policy rule approximation. > > + * @ab: Supplies a pointer to the audit_buffer to append to. > > + * @r: Supplies a pointer to the ipe_rule to approximate a string form for. > > + */ > > +static void audit_rule(struct audit_buffer *ab, const struct ipe_rule *r) > > +{ > > + const struct ipe_prop *ptr; > > + > > + audit_log_format(ab, "rule=\"op=%s ", audit_op_names[r->op]); > > + > > + list_for_each_entry(ptr, &r->props, next) { > > + audit_log_format(ab, "%s", audit_prop_names[ptr->type]); > > + audit_log_format(ab, " "); > > Why make two calls to audit_log_format()? You can just use "%s " as > the format string. > Yep, this code is kind of silly, I will change the format. Thanks for the advice. > > + } > > + > > + audit_log_format(ab, "action=%s\"", ACTSTR(r->action)); > > +} > > + > > +/** > > + * ipe_audit_match - audit a match for IPE policy. > > + * @ctx: Supplies a pointer to the evaluation context that was used in the > > + * evaluation. > > + * @match_type: Supplies the scope of the match: rule, operation default, > > + * global default. > > + * @act: Supplies the IPE's evaluation decision, deny or allow. > > + * @r: Supplies a pointer to the rule that was matched, if possible. > > + * @enforce: Supplies the enforcement/permissive state at the point > > + * the enforcement decision was made. > > + */ > > +void ipe_audit_match(const struct ipe_eval_ctx *const ctx, > > + enum ipe_match match_type, > > + enum ipe_action_type act, const struct ipe_rule *const r) > > +{ > > + struct inode *inode; > > + struct audit_buffer *ab; > > + const char *op = audit_op_names[ctx->op]; > > + > > + if (act != __IPE_ACTION_DENY && !READ_ONCE(success_audit)) > > + return; > > + > > + ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS); > > + if (!ab) > > + return; > > + > > + if (ctx->file) { > > + audit_log_d_path(ab, "path=", &ctx->file->f_path); > > + inode = file_inode(ctx->file); > > + if (inode) { > > + audit_log_format(ab, " dev="); > > + audit_log_untrustedstring(ab, inode->i_sb->s_id); > > See my comments above about using the 'dev' field name, however, you > shouldn't need to log the device name as an untrusted string as the > string is coming from a trusted source within the kernel (the driver). > I was trying to follow the existing code at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/security/lsm_audit.c#n229 But I do agree as it is already in the kernel, it should be trusted. > > + audit_log_format(ab, " ino=%lu ", inode->i_ino); > > + } > > + } > > + > > + if (match_type == __IPE_MATCH_RULE) > > + audit_rule(ab, r); > > + else if (match_type == __IPE_MATCH_TABLE) > > + audit_log_format(ab, "rule=\"DEFAULT op=%s action=%s\"", op, > > + ACTSTR(act)); > > + else > > + audit_log_format(ab, "rule=\"DEFAULT action=%s\"", > > + ACTSTR(act)); > > + > > + audit_log_end(ab); > > +} > > ... > > > diff --git a/security/ipe/eval.h b/security/ipe/eval.h > > index 88c625d6af97..8fcdb2ea19f4 100644 > > --- a/security/ipe/eval.h > > +++ b/security/ipe/eval.h > > @@ -13,6 +13,7 @@ > > #include "policy.h" > > > > extern struct ipe_policy __rcu *ipe_active_policy; > > +extern bool success_audit; > > > > struct ipe_eval_ctx { > > enum ipe_op_type op; > > @@ -21,6 +22,13 @@ struct ipe_eval_ctx { > > bool from_init_sb; > > }; > > > > +enum ipe_match { > > + __IPE_MATCH_RULE = 0, > > + __IPE_MATCH_TABLE, > > + __IPE_MATCH_GLOBAL, > > + __IPE_MATCH_MAX > > +}; > > + > > void build_eval_ctx(struct ipe_eval_ctx *ctx, const struct file *file, enum ipe_op_type op); > > int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx); > > void ipe_invalidate_pinned_sb(const struct super_block *mnt_sb); > > diff --git a/security/ipe/fs.c b/security/ipe/fs.c > > index 522162af741a..6bd2aa84831b 100644 > > --- a/security/ipe/fs.c > > +++ b/security/ipe/fs.c > > @@ -8,11 +8,65 @@ > > > > #include "ipe.h" > > #include "fs.h" > > +#include "eval.h" > > #include "policy.h" > > +#include "audit.h" > > > > static struct dentry *np __ro_after_init; > > static struct dentry *root __ro_after_init; > > struct dentry *policy_root __ro_after_init; > > +static struct dentry *audit_node __ro_after_init; > > + > > +/** > > + * setaudit - Write handler for the securityfs node, "ipe/success_audit" > > + * @f: Supplies a file structure representing the securityfs node. > > + * @data: Supplies a buffer passed to the write syscall. > > + * @len: Supplies the length of @data. > > + * @offset: unused. > > + * > > + * Return: > > + * * >0 - Success, Length of buffer written > > + * * <0 - Error > > + */ > > +static ssize_t setaudit(struct file *f, const char __user *data, > > + size_t len, loff_t *offset) > > +{ > > + int rc = 0; > > + bool value; > > + > > + if (!file_ns_capable(f, &init_user_ns, CAP_MAC_ADMIN)) > > + return -EPERM; > > + > > + value = READ_ONCE(success_audit); > > I don't understand why you are setting @value here only to change its > value in the line below ... ? > Sorry my mistake, I thought the value can be not set in the function call but after reading the source code I found it will return error in that case. I will remove the above line. -Fan > > + rc = kstrtobool_from_user(data, len, &value); > > + if (rc) > > + return rc; > > + > > + WRITE_ONCE(success_audit, value); > > + > > + return len; > > +} > > -- > paul-moore.com
![]() |