On Thu, Feb 8, 2018 at 4:01 PM, Eric Biggers <ebiggers@xxxxxxxxxx> wrote: > On Wed, Feb 07, 2018 at 08:47:05PM -0500, Jeffrey Walton wrote: >> On Wed, Feb 7, 2018 at 7:09 PM, Eric Biggers <ebiggers@xxxxxxxxxx> wrote: >> > Hello, >> > >> > This series adds Speck support to the crypto API, including the Speck128 >> > and Speck64 variants. Speck is a lightweight block cipher that can be >> > much faster than AES on processors that don't have AES instructions. >> > >> > We are planning to offer Speck-XTS (probably Speck128/256-XTS) as an >> > option for dm-crypt and fscrypt on Android, for low-end mobile devices >> > with older CPUs such as ARMv7 which don't have the Cryptography >> > Extensions. Currently, such devices are unencrypted because AES is not >> > fast enough, even when the NEON bit-sliced implementation of AES is >> > used. Other AES alternatives such as Blowfish, Twofish, Camellia, >> > Cast6, and Serpent aren't fast enough either; it seems that only a >> > modern ARX cipher can provide sufficient performance on these devices. >> > >> > This is a replacement for our original proposal >> > (https://patchwork.kernel.org/patch/10101451/) which was to offer >> > ChaCha20 for these devices. However, the use of a stream cipher for >> > disk/file encryption with no space to store nonces would have been much >> > more insecure than we thought initially, given that it would be used on >> > top of flash storage as well as potentially on top of F2FS, neither of >> > which is guaranteed to overwrite data in-place. >> > >> > ... >> > Thus, patch 1 adds a generic implementation of Speck, and the following >> > patches add a 32-bit ARM NEON implementation of Speck-XTS. The >> > NEON-accelerated implementation is much faster than the generic >> > implementation and therefore is the implementation that would primarily >> > be used in practice on the devices we are targeting. >> > >> > There is no AArch64 implementation added, since such CPUs are likely to >> > have the Cryptography Extensions, allowing the use of AES. >> >> +1 on SPECK. >> ... > > Hi Jeffrey, > > I see you wrote the SPECK implementation in Crypto++, and you are treating the > words as big endian. > > Do you have a reference for this being the "correct" order? Unfortunately the > authors of the cipher failed to mention the byte order in their paper. And they > gave the test vectors as words, so the test vectors don't clarify it either. > > I had assumed little endian words, but now I am having second thoughts... And > to confuse things further, it seems that some implementations (including the > authors own implementation for the SUPERCOP benchmark toolkit [1]) even consider > the words themselves in the order (y, x) rather than the more intuitive (x, y). > > [1] https://github.com/iadgov/simon-speck-supercop/blob/master/crypto_stream/speck128128ctr/ref/stream.c > > In fact, even the reference code from the paper treats pt[0] as y and pt[1] as > x, where 'pt' is a u64 array -- although that being said, it's not shown how the > actual bytes should be translated to/from those u64 arrays. > > I'd really like to avoid people having to add additional versions of SPECK later > for the different byte and word orders... Hi Eric, Yeah, this was a point of confusion for us as well. After the sidebar conversations I am wondering about the correctness of Crypto++ implementation. As a first step here is the official test vector for Speck-128(128) from Appendix C, p. 42 (https://eprint.iacr.org/2013/404.pdf): Speck128/128 Key: 0f0e0d0c0b0a0908 0706050403020100 Plaintext: 6c61766975716520 7469206564616d20 Ciphertext: a65d985179783265 7860fedf5c570d18 We had some confusion over the presentation. Here is what the Simon and Speck team sent when I asked about it, what gets plugged into the algorithm, and how it gets plugged in: <BEGIN SNIP PERSONAL EMAIL> On Mon, Nov 20, 2017 at 10:50 AM, <lrwinge@xxxxxxxxxxxxx> wrote: > ... > I'll explain the problem you have been having with our test vectors. > > The key is: 0x0f0e0d0c0b0a0908 0x0706050403020100 > The plaintext is: 6c61766975716520 7469206564616d20 > The ciphertext is: a65d985179783265 7860fedf5c570d18 > > The problem is essentially one of what goes where and we probably could > have done a better job explaining things. > > For the key, with two words, K=(K[1],K[0]). With three words K=(K[2],K[1],K[0]), > with four words K=(K[3],K[2],K[1],K[0]). > > So for the test vector you should have K[0]= 0x0706050403020100, K[1]= 0x0f0e0d0c0b0a0908 > which is the opposite of what you have done. > > If we put this K into ExpandKey(K,sk) then the first few round keys > are: > > 0706050403020100 > 37253b31171d0309 > f91d89cc90c4085c > c6b1f07852cc7689 > ... > > For the plaintext, P=(P[1],P[0]), i.e., P[1] goes into the left word of the block cipher > and P[0] goes into the right word of the block cipher. So you should have > m[0]= 7469206564616d20 and m[1]= 6c61766975716520, which is again opposite of what you > have. If c[0]=m[0] and c[1]=m[1], then the encrypt function should be called as > Encrypt(c+1,c+0,sk). The resulting ciphertext is (c+1,c+0). > > In general, everything goes in as a byte stream (not 64-bit words). In this case, > if the 16 bytes of key are 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f then > we first need to turn these into two 64-bit words. The first word, K[0] is > 0706050403020100 and the second word is K[1]=0f0e0d0c0b0a0908. On x86 processors, > if the key bytes are in the array k[] of type uint8_t, then a simple > casting should get you K[1] and K[0]. That is, K[0]=((uint64_t *)k)[0] and > K[1]=((uint64_t *)k)[1]. The key expansion is run with ExpandKey(K,sk). > So that was what we had in mind. > > Similarly, if the plaintext "bytes" were: 20 6d 61 64 65 20 69 74 20 65 71 75 69 76 61 6c > (which is ascii for " made it equival") > then we first need to turn these into two 64-bit words. The first word is > pt[0]=7469206564616d20 and the second word is pt[1]= 6c61766975716520. The Encrypt > routine is run as Encrypt(pt[1],pt[0],sk). The resulting ciphertext is (ct[1],ct[0]) > which you would turn back into a byte stream in the reverse of what we did. For > example, if ct[1]= a65d985179783265 and ct[0]= 7860fedf5c570d18, then if c[] is a > byte stream (i.e., of type uint8_t), then we would have c[0]=18, c[1]=0d, c[2]=57, c[3]=5c, etc. > This is easy to do on x86 with a cast. > > Let me know if all of this is now clear. > > Best regards, <END SNIP PERSONAL EMAIL> Finally, here is the Simon and Speck team GitHub. It is the implementation the team submitted to SUPERCOP: https://github.com/iadgov/simon-speck-supercop . The files of interest are in crypto_stream: * speck128128ctr/ref/stream.c * speck128192ctr/ref/stream.c * speck128256ctr/ref/stream.c * speck64128ctr/ref/stream.c * speck6496ctr/ref/stream.c The reference implementation uses CTR mode rather then ECB mode. After the CTR -> ECB conversion (mostly trivial), and then plugging in the test vectors data (key and message), we could not arrive at the same answer as the published test vector. However, we may have been plugging things in incorrectly. We were able to arrive at test vector results after a minor modification, but it may have been the wrong thing to do (in hindsight). I'll be revisiting this shortly. Hopefully this should get things started on sorting out the details. Jeff -- To unsubscribe from this list: send the line "unsubscribe linux-fscrypt" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |