Re: [PATCH] fpga: zynq-fpga: Ensure proper xCAP interface switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-05-19 at 16:02:32 +0530, Nava kishore Manne wrote:
> From: Alfonso Rodriguez <alfonso.rodriguezm@xxxxxx>
> 
> Ensure that the low-level fpga-manager driver for Zynq-7000 devices
> switches between reconfiguration interfaces as specified in the TRM
> (section 6.5.1: "Ensure that all outstanding transactions are completed
> before changing interfaces"); device (re)configuration may fail otherwise

Please briefly describe how the change conforms to the Doc in changelog,
rather than just leave the Doc for reviewers.

And please provide the Link to documentation.

> 
> Signed-off-by: Alfonso Rodriguez <alfonso.rodriguezm@xxxxxx>
> Tested-by: Nava kishore Manne <nava.kishore.manne@xxxxxxx>

Please add your own SOB as you are handling the patch.

Thanks,
Yilun

> ---
>  drivers/fpga/zynq-fpga.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
> index ae0da361e6c6..88db9ac36887 100644
> --- a/drivers/fpga/zynq-fpga.c
> +++ b/drivers/fpga/zynq-fpga.c
> @@ -493,15 +493,16 @@ static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
>  	if (err)
>  		return err;
>  
> -	/* Release 'PR' control back to the ICAP */
> -	zynq_fpga_write(priv, CTRL_OFFSET,
> -		zynq_fpga_read(priv, CTRL_OFFSET) & ~CTRL_PCAP_PR_MASK);
> -
>  	err = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, intr_status,
>  				     intr_status & IXR_PCFG_DONE_MASK,
>  				     INIT_POLL_DELAY,
>  				     INIT_POLL_TIMEOUT);
>  
> +	/* Release 'PR' control back to the ICAP */
> +	zynq_fpga_write(priv, CTRL_OFFSET,
> +			zynq_fpga_read(priv, CTRL_OFFSET)
> +			& ~CTRL_PCAP_PR_MASK);
> +
>  	clk_disable(priv->clk);
>  
>  	if (err)
> -- 
> 2.25.1
> 



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux