On Mon, 17 Apr 2023, Ilpo Järvinen wrote: > On some MAX 10 cards, the BMC firmware is not available to service > handshake registers during secure update erase and write phases at > normal speeds. This problem affects at least hwmon driver. When the MAX > 10 hwmon driver tries to read the sensor values during a secure update, > the reads are slowed down (e.g., reading all D5005 sensors takes ~24s > which is magnitudes worse than the normal <0.02s). > > Manage access to the handshake registers using a rw semaphore and a FW > state variable to prevent accesses during those secure update phases > and return -EBUSY instead. > > If handshake_sys_reg_nranges == 0, don't update bwcfw_state as it is not > used. This avoids the locking cost. > > Co-developed-by: Russ Weight <russell.h.weight@xxxxxxxxx> > Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx> > Co-developed-by: Xu Yilun <yilun.xu@xxxxxxxxx> > Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx> > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> > --- > drivers/fpga/intel-m10-bmc-sec-update.c | 17 +++++-- > drivers/mfd/intel-m10-bmc-core.c | 67 ++++++++++++++++++++++++- > drivers/mfd/intel-m10-bmc-spi.c | 14 ++++++ > include/linux/mfd/intel-m10-bmc.h | 28 +++++++++++ > 4 files changed, 121 insertions(+), 5 deletions(-) Applied, thanks -- Lee Jones [李琼斯]
