This patch changes the show() method of the "state" sysfs attribute to
propagate errors returned by the enable_show() op. In this way,
userspace can distinguish between when the bridge is actually "enabled"
(i.e., allowing signals) or "disabled" (i.e., gating signals), or when
there is an error.
Currently, enable_show() returns an integer representing the bridge's
state (enabled or disabled) or an error code. However, this integer
value is interpreted in state_show() as a bool, resulting in the method
printing "enabled" (i.e., the bridge allows signals to pass), without
propagating the error, even when enable_show() returns an error code.
Thanks
Signed-off-by: Marco Pagani <marpagan@xxxxxxxxxx>
---
drivers/fpga/fpga-bridge.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
index 727704431f61..5cd40acab5bf 100644
--- a/drivers/fpga/fpga-bridge.c
+++ b/drivers/fpga/fpga-bridge.c
@@ -293,12 +293,15 @@ static ssize_t state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fpga_bridge *bridge = to_fpga_bridge(dev);
- int enable = 1;
+ int state = 1;
- if (bridge->br_ops && bridge->br_ops->enable_show)
- enable = bridge->br_ops->enable_show(bridge);
+ if (bridge->br_ops && bridge->br_ops->enable_show) {
+ state = bridge->br_ops->enable_show(bridge);
+ if (state < 0)
+ return state;
+ }
- return sprintf(buf, "%s\n", enable ? "enabled" : "disabled");
+ return sysfs_emit(buf, "%s\n", state ? "enabled" : "disabled");
}
static DEVICE_ATTR_RO(name);
--
2.39.1
