Re: [PATCH v5 08/10] fpga: m10bmc-sec: Differentiate rsu status from doorbell in csr map

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-12-26 at 19:58:47 +0200, Ilpo Järvinen wrote:
> The rsu_status field moves from the doorbell register to the auth
> result register in the PMCI implementation of the MAX10 BMC. Refactor
> the sec update driver code to handle two distinct registers (rsu_status
> field was added into csr map already when it was introduced but it was
> unused until now).
> 
> Co-developed-by: Tianfei zhang <tianfei.zhang@xxxxxxxxx>
> Signed-off-by: Tianfei zhang <tianfei.zhang@xxxxxxxxx>
> Co-developed-by: Russ Weight <russell.h.weight@xxxxxxxxx>
> Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> ---
>  drivers/fpga/intel-m10-bmc-sec-update.c | 68 ++++++++++++++++---------
>  include/linux/mfd/intel-m10-bmc.h       |  2 +-
>  2 files changed, 46 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
> index 6e58a463619c..1fe8b7ff594c 100644
> --- a/drivers/fpga/intel-m10-bmc-sec-update.c
> +++ b/drivers/fpga/intel-m10-bmc-sec-update.c
> @@ -251,7 +251,7 @@ static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell)
>  	const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
>  	u32 auth_result;
>  
> -	dev_err(sec->dev, "RSU error status: 0x%08x\n", doorbell);
> +	dev_err(sec->dev, "Doorbell: 0x%08x\n", doorbell);
>  
>  	if (!m10bmc_sys_read(sec->m10bmc, csr_map->auth_result, &auth_result))
>  		dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result);
> @@ -279,6 +279,30 @@ static bool rsu_progress_busy(u32 progress)
>  		progress == RSU_PROG_PROGRAM_KEY_HASH);
>  }
>  
> +static int m10bmc_sec_progress_status(struct m10bmc_sec *sec, u32 *doorbell,

Please try to rename the parameters, to indicate u32 *doorbell is the
raw value from doorbell register, and u32 *progress & status are
software managed info.

> +				      u32 *progress, u32 *status)
> +{
> +	const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> +	u32 status_reg;
> +	int ret;
> +
> +	ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell);
> +	if (ret)
> +		return ret;
> +
> +	if (csr_map->doorbell != csr_map->rsu_status) {

I prefer not to complicate the csr map filling in intel-m10-bmc, just invalid
the addr value if there is no such register for the board.

> +		ret = m10bmc_sys_read(sec->m10bmc, csr_map->rsu_status, &status_reg);
> +		if (ret)
> +			return ret;
> +		*status = rsu_stat(status_reg);
> +	} else {
> +		*status = rsu_stat(*doorbell);
> +	}
> +	*progress = rsu_prog(*doorbell);
> +
> +	return 0;
> +}
> +
>  static enum fw_upload_err rsu_check_idle(struct m10bmc_sec *sec)
>  {
>  	const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> @@ -297,18 +321,14 @@ static enum fw_upload_err rsu_check_idle(struct m10bmc_sec *sec)
>  	return FW_UPLOAD_ERR_NONE;
>  }
>  
> -static inline bool rsu_start_done(u32 doorbell)
> +static inline bool rsu_start_done(u32 doorbell, u32 progress, u32 status)

Same concern for the naming, some more below I didn't list.

>  {
> -	u32 status, progress;
> -
>  	if (doorbell & DRBL_RSU_REQUEST)
>  		return false;
>  
> -	status = rsu_stat(doorbell);
>  	if (status == RSU_STAT_ERASE_FAIL || status == RSU_STAT_WEAROUT)
>  		return true;
>  
> -	progress = rsu_prog(doorbell);
>  	if (!rsu_progress_done(progress))
>  		return true;
>  
> @@ -318,8 +338,8 @@ static inline bool rsu_start_done(u32 doorbell)
>  static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
>  {
>  	const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> -	u32 doorbell, status;
> -	int ret;
> +	u32 doorbell, progress, status;
> +	int ret, err;
>  
>  	ret = regmap_update_bits(sec->m10bmc->regmap,
>  				 csr_map->base + csr_map->doorbell,
> @@ -330,21 +350,20 @@ static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
>  	if (ret)
>  		return FW_UPLOAD_ERR_RW_ERROR;
>  
> -	ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
> -				       csr_map->base + csr_map->doorbell,
> -				       doorbell,
> -				       rsu_start_done(doorbell),
> -				       NIOS_HANDSHAKE_INTERVAL_US,
> -				       NIOS_HANDSHAKE_TIMEOUT_US);
> +	ret = read_poll_timeout(m10bmc_sec_progress_status, err,
> +				err < 0 || rsu_start_done(doorbell, progress, status),
> +				NIOS_HANDSHAKE_INTERVAL_US,
> +				NIOS_HANDSHAKE_TIMEOUT_US,
> +				false,
> +				sec, &doorbell, &progress, &status);
>  
>  	if (ret == -ETIMEDOUT) {
>  		log_error_regs(sec, doorbell);
>  		return FW_UPLOAD_ERR_TIMEOUT;
> -	} else if (ret) {
> +	} else if (err) {
>  		return FW_UPLOAD_ERR_RW_ERROR;
>  	}
>  
> -	status = rsu_stat(doorbell);
>  	if (status == RSU_STAT_WEAROUT) {
>  		dev_warn(sec->dev, "Excessive flash update count detected\n");
>  		return FW_UPLOAD_ERR_WEAROUT;
> @@ -393,7 +412,7 @@ static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec)
>  static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
>  {
>  	const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> -	u32 doorbell;
> +	u32 doorbell, status;
>  	int ret;
>  
>  	ret = regmap_update_bits(sec->m10bmc->regmap,
> @@ -418,7 +437,10 @@ static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
>  		return FW_UPLOAD_ERR_RW_ERROR;
>  	}
>  
> -	if (!rsu_status_ok(rsu_stat(doorbell))) {
> +	ret = m10bmc_sys_read(sec->m10bmc, csr_map->rsu_status, &status);

Same as above, please just handle the detailed register definition differences
in this driver, not in csr map.

Thanks,
Yilun

> +	if (ret)
> +		return ret;
> +	if (!rsu_status_ok(rsu_stat(status))) {
>  		log_error_regs(sec, doorbell);
>  		return FW_UPLOAD_ERR_HW_ERROR;
>  	}
> @@ -428,18 +450,18 @@ static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
>  
>  static int rsu_check_complete(struct m10bmc_sec *sec, u32 *doorbell)
>  {
> -	const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> +	u32 progress, status;
>  
> -	if (m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell))
> +	if (m10bmc_sec_progress_status(sec, doorbell, &progress, &status))
>  		return -EIO;
>  
> -	if (!rsu_status_ok(rsu_stat(*doorbell)))
> +	if (!rsu_status_ok(status))
>  		return -EINVAL;
>  
> -	if (rsu_progress_done(rsu_prog(*doorbell)))
> +	if (rsu_progress_done(progress))
>  		return 0;
>  
> -	if (rsu_progress_busy(rsu_prog(*doorbell)))
> +	if (rsu_progress_busy(progress))
>  		return -EAGAIN;
>  
>  	return -EINVAL;
> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> index 42e2ce7fe439..cc2d9eb597b0 100644
> --- a/include/linux/mfd/intel-m10-bmc.h
> +++ b/include/linux/mfd/intel-m10-bmc.h
> @@ -58,7 +58,7 @@
>  #define HOST_STATUS_ABORT_RSU		0x2
>  
>  #define rsu_prog(doorbell)	FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
> -#define rsu_stat(doorbell)	FIELD_GET(DRBL_RSU_STATUS, doorbell)
> +#define rsu_stat(status_reg)	FIELD_GET(DRBL_RSU_STATUS, status_reg)
>  
>  /* interval 100ms and timeout 5s */
>  #define NIOS_HANDSHAKE_INTERVAL_US	(100 * 1000)
> -- 
> 2.30.2
> 



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux