Re: [PATCH v8 3/4] fpga: dfl: add basic support for DFHv1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/28/22 10:16 AM, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>

Version 1 of the Device Feature Header (DFH) definition adds
functionality to the DFL bus.

A DFHv1 header may have one or more parameter blocks that
further describes the HW to SW.  Add support to the DFL bus
to parse the MSI-X parameter.

The location of a feature's register set is explicitly
described in DFHv1 and can be relative to the base of the DFHv1
or an absolute address.  Parse the location and pass the information
to DFL driver.

Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
v8: use struct_size() from overflow.h
     add dfh_get_u64_param_vals()

v7: no change

v6: move MSI_X parameter definitions to drivers/fpga/dfl.h

v5: update field names
     fix find_param/dfh_get_psize
     clean up mmio_res assignments
     use u64* instead of void*
     use FIELD_GET instead of masking

v4: s/MSIX/MSI_X
     move kernel doc to implementation
     use structure assignment
     fix decode of absolute address
     clean up comment in parse_feature_irqs
     remove use of csr_res

v3: remove unneeded blank line
     use clearer variable name
     pass finfo into parse_feature_irqs()
     refactor code for better indentation
     use switch statement for irq parsing
     squash in code parsing register location

v2: fix kernel doc
     clarify use of DFH_VERSION field
---
  drivers/fpga/dfl.c  | 265 +++++++++++++++++++++++++++++++++++---------
  drivers/fpga/dfl.h  |   9 ++
  include/linux/dfl.h |   6 +
  3 files changed, 229 insertions(+), 51 deletions(-)

diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index b9aae85ba930..403fa425c1fe 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -13,6 +13,7 @@
  #include <linux/dfl.h>
  #include <linux/fpga-dfl.h>
  #include <linux/module.h>
+#include <linux/overflow.h>
  #include <linux/uaccess.h>
#include "dfl.h"
@@ -342,6 +343,8 @@ static void release_dfl_dev(struct device *dev)
  	if (ddev->mmio_res.parent)
  		release_resource(&ddev->mmio_res);
+ kfree(ddev->params);
+
  	ida_free(&dfl_device_ida, ddev->id);
  	kfree(ddev->irqs);
  	kfree(ddev);
@@ -380,7 +383,16 @@ dfl_dev_add(struct dfl_feature_platform_data *pdata,
  	ddev->type = feature_dev_id_type(pdev);
  	ddev->feature_id = feature->id;
  	ddev->revision = feature->revision;
+	ddev->dfh_version = feature->dfh_version;
  	ddev->cdev = pdata->dfl_cdev;
+	if (feature->param_size) {
+		ddev->params = kmemdup(feature->params, feature->param_size, GFP_KERNEL);
+		if (!ddev->params) {
+			ret = -ENOMEM;
+			goto put_dev;
+		}
+		ddev->param_size = feature->param_size;
+	}
/* add mmio resource */
  	parent_res = &pdev->resource[feature->resource_index];
@@ -708,20 +720,27 @@ struct build_feature_devs_info {
   * struct dfl_feature_info - sub feature info collected during feature dev build
   *
   * @fid: id of this sub feature.
+ * @revision: revision of this sub feature
+ * @dfh_version: version of Device Feature Header (DFH)
   * @mmio_res: mmio resource of this sub feature.
   * @ioaddr: mapped base address of mmio resource.
   * @node: node in sub_features linked list.
   * @irq_base: start of irq index in this sub feature.
   * @nr_irqs: number of irqs of this sub feature.
+ * @param_size: size DFH parameters.
+ * @params: DFH parameter data.
   */
  struct dfl_feature_info {
  	u16 fid;
  	u8 revision;
+	u8 dfh_version;
  	struct resource mmio_res;
  	void __iomem *ioaddr;
  	struct list_head node;
  	unsigned int irq_base;
  	unsigned int nr_irqs;
+	unsigned int param_size;
+	u64 params[];
u64 *params
  };
static void dfl_fpga_cdev_add_port_dev(struct dfl_fpga_cdev *cdev,
@@ -797,7 +816,17 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
  		feature->dev = fdev;
  		feature->id = finfo->fid;
  		feature->revision = finfo->revision;
+		feature->dfh_version = finfo->dfh_version;
+ if (finfo->param_size) {
+			feature->params = devm_kmemdup(binfo->dev,
+						       finfo->params, finfo->param_size,
+						       GFP_KERNEL);
+			if (!feature->params)
+				return -ENOMEM;
+
+			feature->param_size = finfo->param_size;
+		}
  		/*
  		 * the FIU header feature has some fundamental functions (sriov
  		 * set, port enable/disable) needed for the dfl bus device and
@@ -934,56 +963,135 @@ static u16 feature_id(u64 value)
  	return 0;
  }
+static u64 *find_param(u64 *params, resource_size_t max, int param_id)
+{
+	u64 *end = params + max / sizeof(u64);
+	u64 v, next;
+
+	while (params < end) {
+		v = *params;
+		if (param_id == FIELD_GET(DFHv1_PARAM_HDR_ID, v))
+			return params;
+
+		next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, v);
+		params += next;
+		if (FIELD_GET(DFHv1_PARAM_HDR_NEXT_EOP, v))
+			break;
Move before next =, and save some work calculating unsed next
+	}
+
+	return NULL;
+}
+
+/**
+ * dfh_find_param() - find parameter block for the given parameter id
+ * @dfl_dev: dfl device
+ * @param: id of dfl parameter
+ *
+ * Return: pointer to start of parameter block, NULL otherwise.
+ */
+u64 *dfh_find_param(struct dfl_device *dfl_dev, int param_id)
+{
+	return find_param(dfl_dev->params, dfl_dev->param_size, param_id);
+}
+EXPORT_SYMBOL_GPL(dfh_find_param);

This and similar should be noop's for dfh v0

Generally there should be better checking if code is running a v1 vs  v0 header.

+
+/**
+ * dfh_get_u64_param_vals() - get array of u64 param values for given parameter id
+ * @dfl_dev: dfl device
+ * @param: id of dfl parameter
+ * @pval: location of parameter data destination
+ * @nvals: number of u64 elements of parameter data
+ *
+ * Return: pointer to start of parameter block, PTR_ERR otherwise
+ */
+u64 *dfh_get_u64_param_vals(struct dfl_device *dfl_dev, int param_id, u64 *pval, int nvals)
nvals should be unsigned
+{
+	u64 *param = find_param(dfl_dev->params, dfl_dev->param_size, param_id);
+	u64 next;
+	int i;
+
+	if (!param)
+		return ERR_PTR(-ENOENT);
+
+	next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, *param);
+
+	if (nvals >= next)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < nvals; i++)
+		*pval++ = param[i + 1];
memcpy ?
+
+	return param;
+}
+EXPORT_SYMBOL_GPL(dfh_get_u64_param_vals);
+
  static int parse_feature_irqs(struct build_feature_devs_info *binfo,
-			      resource_size_t ofst, u16 fid,
-			      unsigned int *irq_base, unsigned int *nr_irqs)
+			      resource_size_t ofst, struct dfl_feature_info *finfo)
  {
  	void __iomem *base = binfo->ioaddr + ofst;
  	unsigned int i, ibase, inr = 0;
+	void *params = finfo->params;
  	enum dfl_id_type type;
+	u16 fid = finfo->fid;
  	int virq;
+	u64 *p;
  	u64 v;
- type = feature_dev_id_type(binfo->feature_dev);
+	switch (finfo->dfh_version) {
+	case 0:

A switch makes this code complicated to read.

Have you thought about a function pointer table to separate out similar v1 vs v0 code blocks?

+		/*
+		 * DFHv0 only provides MMIO resource information for each feature
+		 * in the DFL header.  There is no generic interrupt information.
+		 * Instead, features with interrupt functionality provide
+		 * the information in feature specific registers.
+		 */
+		type = feature_dev_id_type(binfo->feature_dev);
+		if (type == PORT_ID) {
+			switch (fid) {
+			case PORT_FEATURE_ID_UINT:
+				v = readq(base + PORT_UINT_CAP);
+				ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
+				inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
+				break;
+			case PORT_FEATURE_ID_ERROR:
+				v = readq(base + PORT_ERROR_CAP);
+				ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+				break;
+			}
+		} else if (type == FME_ID) {
+			switch (fid) {
+			case FME_FEATURE_ID_GLOBAL_ERR:
+				v = readq(base + FME_ERROR_CAP);
+				ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
+				break;
+			}
+		}
+		break;
- /*
-	 * Ideally DFL framework should only read info from DFL header, but
-	 * current version DFL only provides mmio resources information for
-	 * each feature in DFL Header, no field for interrupt resources.
-	 * Interrupt resource information is provided by specific mmio
-	 * registers of each private feature which supports interrupt. So in
-	 * order to parse and assign irq resources, DFL framework has to look
-	 * into specific capability registers of these private features.
-	 *
-	 * Once future DFL version supports generic interrupt resource
-	 * information in common DFL headers, the generic interrupt parsing
-	 * code will be added. But in order to be compatible to old version
-	 * DFL, the driver may still fall back to these quirks.
-	 */
-	if (type == PORT_ID) {
-		switch (fid) {
-		case PORT_FEATURE_ID_UINT:
-			v = readq(base + PORT_UINT_CAP);
-			ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
-			inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
-			break;
-		case PORT_FEATURE_ID_ERROR:
-			v = readq(base + PORT_ERROR_CAP);
-			ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+	case 1:
+		/*
+		 * DFHv1 provides interrupt resource information in DFHv1
+		 * parameter blocks.
+		 */
+		p = find_param(params, finfo->param_size, DFHv1_PARAM_ID_MSI_X);
+		if (!p)
  			break;
-		}
-	} else if (type == FME_ID) {
-		if (fid == FME_FEATURE_ID_GLOBAL_ERR) {
-			v = readq(base + FME_ERROR_CAP);
-			ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
-		}
+
+		p++;
+		ibase = FIELD_GET(DFHv1_PARAM_MSI_X_STARTV, *p);
+		inr = FIELD_GET(DFHv1_PARAM_MSI_X_NUMV, *p);
+		break;
+
+	default:
+		dev_warn(binfo->dev, "unexpected DFH version %d\n", finfo->dfh_version);
+		break;
  	}
if (!inr) {
-		*irq_base = 0;
-		*nr_irqs = 0;
+		finfo->irq_base = 0;
+		finfo->nr_irqs = 0;
  		return 0;
  	}
@@ -1006,12 +1114,37 @@ static int parse_feature_irqs(struct build_feature_devs_info *binfo,
  		}
  	}
- *irq_base = ibase;
-	*nr_irqs = inr;
+	finfo->irq_base = ibase;
+	finfo->nr_irqs = inr;
return 0;
  }
+static int dfh_get_psize(void __iomem *dfh_base, resource_size_t max)
for clarity, psize should be expanded to param_size
+{
+	int size = 0;
+	u64 v, next;
+
+	if (!FIELD_GET(DFHv1_CSR_SIZE_GRP_HAS_PARAMS,
+		       readq(dfh_base + DFHv1_CSR_SIZE_GRP)))
+		return 0;
+
+	while (size + DFHv1_PARAM_HDR < max) {
+		v = readq(dfh_base + DFHv1_PARAM_HDR + size);
+
+		next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, v);
+		if (!next)
+			return -EINVAL;
+
+		size += next * sizeof(u64);
+
+		if (FIELD_GET(DFHv1_PARAM_HDR_NEXT_EOP, v))
+			return size;
+	}
+
+	return -ENOENT;
+}
+
  /*
   * when create sub feature instances, for private features, it doesn't need
   * to provide resource size and feature id as they could be read from DFH
@@ -1023,39 +1156,69 @@ static int
  create_feature_instance(struct build_feature_devs_info *binfo,
  			resource_size_t ofst, resource_size_t size, u16 fid)
  {
-	unsigned int irq_base, nr_irqs;
  	struct dfl_feature_info *finfo;
+	resource_size_t start, end;
+	int dfh_psize = 0;
  	u8 revision = 0;
+	u64 v, addr_off;
+	u8 dfh_ver = 0;
  	int ret;
-	u64 v;
if (fid != FEATURE_ID_AFU) {
  		v = readq(binfo->ioaddr + ofst);
  		revision = FIELD_GET(DFH_REVISION, v);
-
+		dfh_ver = FIELD_GET(DFH_VERSION, v);
  		/* read feature size and id if inputs are invalid */
  		size = size ? size : feature_size(v);
  		fid = fid ? fid : feature_id(v);
+		if (dfh_ver == 1) {
+			dfh_psize = dfh_get_psize(binfo->ioaddr + ofst, size);
+			if (dfh_psize < 0) {
+				dev_err(binfo->dev,
+					"failed to read size of DFHv1 parameters %d\n",
+					dfh_psize);
+				return dfh_psize;
+			}
+			dev_dbg(binfo->dev, "dfhv1_psize %d\n", dfh_psize);
+		}
  	}
if (binfo->len - ofst < size)
  		return -EINVAL;
- ret = parse_feature_irqs(binfo, ofst, fid, &irq_base, &nr_irqs);
-	if (ret)
-		return ret;
-
-	finfo = kzalloc(sizeof(*finfo), GFP_KERNEL);
+	finfo = kzalloc(struct_size(finfo, params, dfh_psize/sizeof(u64)), GFP_KERNEL);
  	if (!finfo)
  		return -ENOMEM;
+ memcpy_fromio(finfo->params, binfo->ioaddr + ofst + DFHv1_PARAM_HDR, dfh_psize);
+	finfo->param_size = dfh_psize;
+
  	finfo->fid = fid;
  	finfo->revision = revision;
-	finfo->mmio_res.start = binfo->start + ofst;
-	finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
+	finfo->dfh_version = dfh_ver;
+	if (dfh_ver == 1) {
+		v = readq(binfo->ioaddr + ofst + DFHv1_CSR_ADDR);
+		addr_off = FIELD_GET(DFHv1_CSR_ADDR_MASK, v);
+		if (FIELD_GET(DFHv1_CSR_ADDR_REL, v))
+			start = addr_off << 1;
+		else
+			start = binfo->start + ofst + addr_off;
+
+		v = readq(binfo->ioaddr + ofst + DFHv1_CSR_SIZE_GRP);
+		end = start + FIELD_GET(DFHv1_CSR_SIZE_GRP_SIZE, v) - 1;
+	} else {
+		start = binfo->start + ofst;
+		end = start + size - 1;
+	}
  	finfo->mmio_res.flags = IORESOURCE_MEM;
-	finfo->irq_base = irq_base;
-	finfo->nr_irqs = nr_irqs;
+	finfo->mmio_res.start = start;
+	finfo->mmio_res.end = end;
+
+	ret = parse_feature_irqs(binfo, ofst, finfo);
+	if (ret) {
+		kfree(finfo);
+		return ret;
+	}
list_add_tail(&finfo->node, &binfo->sub_features);
  	binfo->feature_num++;
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index fc59f33367ee..a21065cec04e 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -111,6 +111,10 @@
  #define DFHv1_PARAM_HDR_NEXT_EOP	BIT_ULL(32)
  #define DFHv1_PARAM_DATA		0x08  /* Offset of Param data from Param header */
+#define DFHv1_PARAM_ID_MSI_X 0x1
+#define DFHv1_PARAM_MSI_X_NUMV		GENMASK_ULL(63, 32)
+#define DFHv1_PARAM_MSI_X_STARTV	GENMASK_ULL(31, 0)
+
  /* Next AFU Register Bitfield */
  #define NEXT_AFU_NEXT_DFH_OFST	GENMASK_ULL(23, 0)	/* Offset to next AFU */
@@ -272,11 +276,14 @@ struct dfl_feature_irq_ctx {
   * @ops: ops of this sub feature.
   * @ddev: ptr to the dfl device of this sub feature.
   * @priv: priv data of this feature.
+ * @param_size: size of dfh parameters
+ * @params: point to memory copy of dfh parameters
   */
  struct dfl_feature {
  	struct platform_device *dev;
  	u16 id;
  	u8 revision;
+	u8 dfh_version;

Needs a description in the comments above.

I am concerned generally about backward compatibility and oot drivers that are dfh v0.

Adding an element in the middle will break things.

These structures could be more explicit about what is common, and what is v0 and v1 specific.

Tom

  	int resource_index;
  	void __iomem *ioaddr;
  	struct dfl_feature_irq_ctx *irq_ctx;
@@ -284,6 +291,8 @@ struct dfl_feature {
  	const struct dfl_feature_ops *ops;
  	struct dfl_device *ddev;
  	void *priv;
+	unsigned int param_size;
+	void *params;
  };
#define FEATURE_DEV_ID_UNUSED (-1)
diff --git a/include/linux/dfl.h b/include/linux/dfl.h
index 431636a0dc78..3138ea42d02e 100644
--- a/include/linux/dfl.h
+++ b/include/linux/dfl.h
@@ -39,9 +39,12 @@ struct dfl_device {
  	u16 type;
  	u16 feature_id;
  	u8 revision;
+	u8 dfh_version;
  	struct resource mmio_res;
  	int *irqs;
  	unsigned int num_irqs;
+	unsigned int param_size;
+	void *params;
  	struct dfl_fpga_cdev *cdev;
  	const struct dfl_device_id *id_entry;
  };
@@ -84,4 +87,7 @@ void dfl_driver_unregister(struct dfl_driver *dfl_drv);
  	module_driver(__dfl_driver, dfl_driver_register, \
  		      dfl_driver_unregister)
+u64 *dfh_find_param(struct dfl_device *dfl_dev, int param);
+
+u64 *dfh_get_u64_param_vals(struct dfl_device *dfl_dev, int param_id, u64 *pval, int nvals);
  #endif /* __LINUX_DFL_H */




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux