On Mon, 26 Dec 2022, Ivan Bornyakov wrote:
> Original busy loop with retries count in mpf_poll_status() is not too
> reliable, as it takes different times on different systems. Replace it
> with read_poll_timeout() macro.
>
> Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
> Signed-off-by: Ivan Bornyakov <i.bornyakov@xxxxxxxxxxx>
> ---
> drivers/fpga/microchip-spi.c | 25 +++++++++++--------------
> 1 file changed, 11 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c
> index e72fedd93a27..f3ddfab87499 100644
> --- a/drivers/fpga/microchip-spi.c
> +++ b/drivers/fpga/microchip-spi.c
> @@ -6,6 +6,7 @@
> #include <asm/unaligned.h>
> #include <linux/delay.h>
> #include <linux/fpga/fpga-mgr.h>
> +#include <linux/iopoll.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/spi/spi.h>
> @@ -33,7 +34,7 @@
>
> #define MPF_BITS_PER_COMPONENT_SIZE 22
>
> -#define MPF_STATUS_POLL_RETRIES 10000
> +#define MPF_STATUS_POLL_TIMEOUT (2 * USEC_PER_SEC)
> #define MPF_STATUS_BUSY BIT(0)
> #define MPF_STATUS_READY BIT(1)
> #define MPF_STATUS_SPI_VIOLATION BIT(2)
> @@ -197,21 +198,17 @@ static int mpf_ops_parse_header(struct fpga_manager *mgr,
> /* Poll HW status until busy bit is cleared and mask bits are set. */
> static int mpf_poll_status(struct mpf_priv *priv, u8 mask)
> {
> - int status, retries = MPF_STATUS_POLL_RETRIES;
> + int ret, status;
>
> - while (retries--) {
> - status = mpf_read_status(priv);
> - if (status < 0)
> - return status;
> -
> - if (status & MPF_STATUS_BUSY)
> - continue;
> -
> - if (!mask || (status & mask))
> - return status;
> - }
> + ret = read_poll_timeout(mpf_read_status, status,
> + (status < 0) ||
> + (!(status & MPF_STATUS_BUSY) &&
> + (!mask || (status & mask))),
I'm just noting that this code does not match function's comment
(neither pre nor post diff code). The comment claims "mask bits are set"
but the code tests "any mask bit set".
However, currently it causes no issue because only MPF_STATUS_READY is
passed and it's BIT(1).
I think the condition matching to the comment would be this (IMHO, it is
also slightly simpler because !mask doesn't need to be special cased):
((status & (MPF_STATUS_BUSY | mask)) == mask)
(But not necessarily to be changed in this patch.)
--
i.
> + 0, MPF_STATUS_POLL_TIMEOUT, false, priv);
> + if (ret < 0)
> + return ret;
>
> - return -EBUSY;
> + return status;
> }
>
> static int mpf_spi_write(struct mpf_priv *priv, const void *buf, size_t buf_size)
>
