Re: [PATCH v3 3/4] fpga: dfl: add basic support for DFHv1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Wed, 5 Oct 2022, Ilpo Järvinen wrote:

Please try to remember cc all people who have commented your patches when
sending the next version.

On Tue, 4 Oct 2022, matthew.gerlach@xxxxxxxxxxxxxxx wrote:

From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>

Add generic support for MSIX interrupts for DFL devices.

The location of a feature's registers is explicitly
described in DFHv1 and can be relative to the base of the DFHv1
or an absolute address.  Parse the location and pass the information
to DFL driver.

Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>

@@ -935,55 +948,74 @@ static u16 feature_id(u64 value)
 }

 static int parse_feature_irqs(struct build_feature_devs_info *binfo,
-			      resource_size_t ofst, u16 fid,
-			      unsigned int *irq_base, unsigned int *nr_irqs)
+			      resource_size_t ofst, struct dfl_feature_info *finfo)
 {
 	void __iomem *base = binfo->ioaddr + ofst;
 	unsigned int i, ibase, inr = 0;
 	enum dfl_id_type type;
-	int virq;
-	u64 v;
-
-	type = feature_dev_id_type(binfo->feature_dev);
+	u16 fid = finfo->fid;
+	u64 v, dfh_ver;

Drop dfh_ver.

I will drop dfh_ver.


+	int virq, off;

 	/*
 	 * Ideally DFL framework should only read info from DFL header, but
-	 * current version DFL only provides mmio resources information for
+	 * current version, DFHv0, only provides mmio resources information for
 	 * each feature in DFL Header, no field for interrupt resources.
 	 * Interrupt resource information is provided by specific mmio
 	 * registers of each private feature which supports interrupt. So in
 	 * order to parse and assign irq resources, DFL framework has to look
 	 * into specific capability registers of these private features.
 	 *
-	 * Once future DFL version supports generic interrupt resource
-	 * information in common DFL headers, the generic interrupt parsing
-	 * code will be added. But in order to be compatible to old version
+	 * DFHv1 supports generic interrupt resource information in DFHv1
+	 * parameter blocks. But in order to be compatible to old version
 	 * DFL, the driver may still fall back to these quirks.

I'm not convinced this comment is useful as is after the introduction of
v1. It feels too focused on v0 limitations.

I suggest you move v0 limitations description to v0 block below and
perhaps state in the end of it that comment that v1 is recommended for
new things because it doesn't have those limitations. Or something along
those lines.

I think I will rework the comment by splitting the descriptions for v0 and v1 and focusing on what each supports rather than limitations.


 	 */
-	if (type == PORT_ID) {
-		switch (fid) {
-		case PORT_FEATURE_ID_UINT:
-			v = readq(base + PORT_UINT_CAP);
-			ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
-			inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
+
+	switch (finfo->dfh_version) {
+	case 0:
+		type = feature_dev_id_type(binfo->feature_dev);
+		if (type == PORT_ID) {
+			switch (fid) {
+			case PORT_FEATURE_ID_UINT:
+				v = readq(base + PORT_UINT_CAP);
+				ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
+				inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
+				break;
+			case PORT_FEATURE_ID_ERROR:
+				v = readq(base + PORT_ERROR_CAP);
+				ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+				break;
+			}
+		} else if (type == FME_ID) {
+			if (fid == FME_FEATURE_ID_GLOBAL_ERR) {
+				v = readq(base + FME_ERROR_CAP);
+				ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
+			}
+		}
+		break;
+
+	case 1:
+		if (!dfhv1_has_params(base))
 			break;
-		case PORT_FEATURE_ID_ERROR:
-			v = readq(base + PORT_ERROR_CAP);
-			ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+
+		off = dfhv1_find_param(base, ofst, DFHv1_PARAM_ID_MSIX);
+		if (off < 0)
 			break;
-		}
-	} else if (type == FME_ID) {
-		if (fid == FME_FEATURE_ID_GLOBAL_ERR) {
-			v = readq(base + FME_ERROR_CAP);
-			ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
-		}
+
+		ibase = readl(base + off + DFHv1_PARAM_MSIX_STARTV);
+		inr = readl(base + off + DFHv1_PARAM_MSIX_NUMV);
+		break;
+
+	default:
+		dev_warn(binfo->dev, "unexpected DFH version %lld\n", dfh_ver);

dfh_ver is uninitialized here. The compiler shouldn't have been happy with
this.

I am surprised the compiler did not flag this uninitialized variable. Getting rid of the dfh_ver altogether is the best course of action.


@@ -1041,21 +1073,33 @@ create_feature_instance(struct build_feature_devs_info *binfo,
 	if (binfo->len - ofst < size)
 		return -EINVAL;

-	ret = parse_feature_irqs(binfo, ofst, fid, &irq_base, &nr_irqs);
-	if (ret)
-		return ret;
-
 	finfo = kzalloc(sizeof(*finfo), GFP_KERNEL);
 	if (!finfo)
 		return -ENOMEM;

 	finfo->fid = fid;
 	finfo->revision = revision;
+	finfo->dfh_version = dfh_version;
 	finfo->mmio_res.start = binfo->start + ofst;
 	finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
 	finfo->mmio_res.flags = IORESOURCE_MEM;
-	finfo->irq_base = irq_base;
-	finfo->nr_irqs = nr_irqs;
+
+	ret = parse_feature_irqs(binfo, ofst, finfo);
+	if (ret)
+		return ret;

finfo has to be freed in case of an error.

Good catch.  Thanks.



Thanks for rearranging, it looks more logical now.

--
i.

[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux