Re: [PATCH v14 1/2] fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06.10.2022 10:44:48, Ivan Bornyakov wrote:
> Add support to the FPGA manager for programming Lattice ECP5 FPGA over
> slave SPI sysCONFIG interface.
> 
> sysCONFIG interface core functionality is separate from both ECP5 and
> SPI specifics, so support for other FPGAs with different port types can
> be added in the future.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@xxxxxxxxxxx>
> ---

[...]

> +static int sysconfig_spi_bitstream_burst_init(struct sysconfig_priv *priv)
> +{
> +	const u8 lsc_bitstream_burst[] = SYSCONFIG_LSC_BITSTREAM_BURST;

I think you're not allowed to use stack memory for SPI transfers. Better
clarify this with the SPI people.

> +	struct spi_device *spi = to_spi_device(priv->dev);
> +	struct spi_transfer xfer = {
> +		.tx_buf = lsc_bitstream_burst,
> +		.len = sizeof(lsc_bitstream_burst),
> +		.cs_change = 1,
> +	};
> +	struct spi_message msg;
> +	int ret;
> +
> +	spi_message_init_with_transfers(&msg, &xfer, 1);
> +
> +	/*
> +	 * Lock SPI bus for exclusive usage until FPGA programming is done.
> +	 * SPI bus will be released in sysconfig_spi_bitstream_burst_complete().
> +	 */
> +	spi_bus_lock(spi->controller);
> +
> +	ret = spi_sync_locked(spi, &msg);
> +	if (ret)
> +		spi_bus_unlock(spi->controller);
> +
> +	return ret;
> +}

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux