Re: [PATCH v12 1/2] fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-09-19 at 16:47:49 +0300, Ivan Bornyakov wrote:
> Add support to the FPGA manager for programming Lattice ECP5 FPGA over
> slave SPI sysCONFIG interface.
> 
> sysCONFIG interface core functionality is separate from both ECP5 and
> SPI specifics, so support for other FPGAs with different port types can
> be added in the future.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@xxxxxxxxxxx>
> ---
>  drivers/fpga/Kconfig                 |  11 +
>  drivers/fpga/Makefile                |   2 +
>  drivers/fpga/lattice-sysconfig-spi.c | 153 ++++++++++
>  drivers/fpga/lattice-sysconfig.c     | 408 +++++++++++++++++++++++++++
>  drivers/fpga/lattice-sysconfig.h     |  40 +++
>  5 files changed, 614 insertions(+)
>  create mode 100644 drivers/fpga/lattice-sysconfig-spi.c
>  create mode 100644 drivers/fpga/lattice-sysconfig.c
>  create mode 100644 drivers/fpga/lattice-sysconfig.h
> 
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index 6c416955da53..d1a8107fdcb3 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -263,4 +263,15 @@ config FPGA_MGR_MICROCHIP_SPI
>  	  programming over slave SPI interface with .dat formatted
>  	  bitstream image.
>  
> +config FPGA_MGR_LATTICE_SYSCONFIG
> +	tristate
> +
> +config FPGA_MGR_LATTICE_SYSCONFIG_SPI
> +	tristate "Lattice sysCONFIG SPI FPGA manager"
> +	depends on SPI
> +	select FPGA_MGR_LATTICE_SYSCONFIG
> +	help
> +	  FPGA manager driver support for Lattice FPGAs programming over slave
> +	  SPI sysCONFIG interface.
> +
>  endif # FPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 42ae8b58abce..72e554b4d2f7 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -20,6 +20,8 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
>  obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
>  obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA)	+= versal-fpga.o
>  obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI)	+= microchip-spi.o
> +obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG)	+= lattice-sysconfig.o
> +obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI)	+= lattice-sysconfig-spi.o
>  obj-$(CONFIG_ALTERA_PR_IP_CORE)		+= altera-pr-ip-core.o
>  obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)	+= altera-pr-ip-core-plat.o
>  
> diff --git a/drivers/fpga/lattice-sysconfig-spi.c b/drivers/fpga/lattice-sysconfig-spi.c
> new file mode 100644
> index 000000000000..d015b796adf7
> --- /dev/null
> +++ b/drivers/fpga/lattice-sysconfig-spi.c
> @@ -0,0 +1,153 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Lattice FPGA programming over slave SPI sysCONFIG interface.
> + */
> +
> +#include <linux/of_device.h>
> +#include <linux/spi/spi.h>
> +
> +#include "lattice-sysconfig.h"
> +
> +static const u32 ecp5_spi_max_speed_hz = 60000000;
> +
> +static int sysconfig_spi_cmd_write(struct sysconfig_priv *priv,
> +				   const void *tx_buf, size_t tx_len)
> +{
> +	struct spi_device *spi = to_spi_device(priv->dev);
> +
> +	return spi_write(spi, tx_buf, tx_len);
> +}
> +
> +static int sysconfig_spi_cmd_read(struct sysconfig_priv *priv,
> +				  const void *tx_buf, size_t tx_len,
> +				  void *rx_buf, size_t rx_len)
> +{
> +	struct spi_device *spi = to_spi_device(priv->dev);
> +
> +	return spi_write_then_read(spi, tx_buf, tx_len, rx_buf, rx_len);
> +}
> +
> +static int sysconfig_spi_bitstream_burst_init(struct sysconfig_priv *priv)
> +{
> +	const u8 lsc_bitstream_burst[] = SYSCONFIG_LSC_BITSTREAM_BURST;
> +	struct spi_device *spi = to_spi_device(priv->dev);
> +	struct spi_transfer xfer = {
> +		.tx_buf = lsc_bitstream_burst,
> +		.len = sizeof(lsc_bitstream_burst),
> +		.cs_change = 1,
> +	};
> +	struct spi_message msg;
> +	int ret;
> +
> +	spi_message_init_with_transfers(&msg, &xfer, 1);
> +
> +	/*
> +	 * Lock SPI bus for exclusive usage until FPGA programming is done.
> +	 * SPI bus will be released in sysconfig_spi_bitstream_burst_complete().
> +	 */
> +	spi_bus_lock(spi->controller);
> +
> +	ret = spi_sync_locked(spi, &msg);
> +	if (ret)
> +		spi_bus_unlock(spi->controller);
> +
> +	return ret;
> +}
> +
> +static int sysconfig_spi_bitstream_burst_write(struct sysconfig_priv *priv,
> +					       const char *buf, size_t len)
> +{
> +	struct spi_device *spi = to_spi_device(priv->dev);
> +	struct spi_transfer xfer = {
> +		.tx_buf = buf,
> +		.len = len,
> +		.cs_change = 1,
> +	};
> +	struct spi_message msg;
> +
> +	spi_message_init_with_transfers(&msg, &xfer, 1);
> +
> +	return spi_sync_locked(spi, &msg);
> +}
> +
> +static int sysconfig_spi_bitstream_burst_complete(struct sysconfig_priv *priv)
> +{
> +	struct spi_device *spi = to_spi_device(priv->dev);
> +
> +	/* Bitstream burst write is done, release SPI bus */
> +	spi_bus_unlock(spi->controller);
> +
> +	/* Toggle CS to finish bitstream write */
> +	return spi_write(spi, NULL, 0);
> +}
> +
> +static int sysconfig_spi_probe(struct spi_device *spi)
> +{
> +	const struct spi_device_id *dev_id;
> +	struct device *dev = &spi->dev;
> +	struct sysconfig_priv *priv;
> +	const u32 *spi_max_speed;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	spi_max_speed = of_device_get_match_data(dev);

Just device_get_match_data would be OK?

> +	if (!spi_max_speed) {
> +		dev_id = spi_get_device_id(spi);
> +		if (!dev_id)
> +			return -ENODEV;
> +
> +		spi_max_speed = (const u32 *)dev_id->driver_data;
> +	}
> +
> +	if (!spi_max_speed)
> +		return -EINVAL;
> +
> +	if (spi->max_speed_hz > *spi_max_speed) {
> +		dev_err(dev, "SPI speed %u is too high, maximum speed is %u\n",
> +			spi->max_speed_hz, *spi_max_speed);
> +		return -EINVAL;
> +	}
> +
> +	priv->dev = dev;
> +	priv->command_write = sysconfig_spi_cmd_write;
> +	priv->command_read = sysconfig_spi_cmd_read;
> +	priv->bitstream_burst_write_init = sysconfig_spi_bitstream_burst_init;
> +	priv->bitstream_burst_write = sysconfig_spi_bitstream_burst_write;
> +	priv->bitstream_burst_write_complete = sysconfig_spi_bitstream_burst_complete;
> +
> +	return sysconfig_probe(priv);
> +}
> +
> +static const struct spi_device_id sysconfig_spi_ids[] = {
> +	{
> +		.name = "sysconfig-ecp5",
> +		.driver_data = (kernel_ulong_t)&ecp5_spi_max_speed_hz,
> +	}, {},
> +};
> +MODULE_DEVICE_TABLE(spi, sysconfig_spi_ids);
> +
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id sysconfig_of_ids[] = {
> +	{
> +		.compatible = "lattice,sysconfig-ecp5",
> +		.data = &ecp5_spi_max_speed_hz,
> +	}, {},
> +};
> +MODULE_DEVICE_TABLE(of, sysconfig_of_ids);
> +#endif /* IS_ENABLED(CONFIG_OF) */
> +
> +static struct spi_driver lattice_sysconfig_driver = {
> +	.probe = sysconfig_spi_probe,
> +	.id_table = sysconfig_spi_ids,
> +	.driver = {
> +		.name = "lattice_sysconfig_spi_fpga_mgr",
> +		.of_match_table = of_match_ptr(sysconfig_of_ids),
> +	},
> +};
> +

delete the blank line please.

> +module_spi_driver(lattice_sysconfig_driver);
> +
> +MODULE_DESCRIPTION("Lattice sysCONFIG Slave SPI FPGA Manager");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/fpga/lattice-sysconfig.c b/drivers/fpga/lattice-sysconfig.c
> new file mode 100644
> index 000000000000..9c878281b199
> --- /dev/null
> +++ b/drivers/fpga/lattice-sysconfig.c
> @@ -0,0 +1,408 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Lattice FPGA sysCONFIG interface functions independent of port type.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/fpga/fpga-mgr.h>
> +#include <linux/gpio/consumer.h>
> +
> +#include "lattice-sysconfig.h"
> +
> +static int sysconfig_cmd_write(struct sysconfig_priv *priv, const void *buf,
> +			       size_t buf_len)
> +{
> +	return priv->command_write(priv, buf, buf_len);
> +}
> +
> +static int sysconfig_cmd_read(struct sysconfig_priv *priv, const void *tx_buf,
> +			      size_t tx_len, void *rx_buf, size_t rx_len)
> +{
> +	return priv->command_read(priv, tx_buf, tx_len, rx_buf, rx_len);
> +}
> +
> +static int sysconfig_read_busy(struct sysconfig_priv *priv)
> +{
> +	const u8 lsc_check_busy[] = SYSCONFIG_LSC_CHECK_BUSY;
> +	u8 busy;
> +	int ret;
> +
> +	ret = sysconfig_cmd_read(priv, lsc_check_busy, sizeof(lsc_check_busy),
> +				 &busy, sizeof(busy));
> +
> +	return ret ? : busy;
> +}
> +
> +static int sysconfig_poll_busy(struct sysconfig_priv *priv)
> +{
> +	size_t retries = SYSCONFIG_POLL_RETRIES;
> +	int ret;
> +
> +	while (retries--) {

Could you implement it in a time measurable way for the poll timeout, I
think for now the actual timeout values for command polling & gpio
polling are much different.

> +		ret = sysconfig_read_busy(priv);
> +		if (ret <= 0)
> +			return ret;
> +
> +		usleep_range(SYSCONFIG_POLL_INTERVAL_US,
> +			     SYSCONFIG_POLL_INTERVAL_US * 2);

It's good to make cpu relax on polling, but why we just sleep for
command poll but not for gpio poll.

> +	}
> +
> +	return -EBUSY;
> +}
> +
> +static int sysconfig_read_status(struct sysconfig_priv *priv, u32 *status)
> +{
> +	const u8 lsc_read_status[] = SYSCONFIG_LSC_READ_STATUS;
> +	__be32 device_status;
> +	int ret;
> +
> +	ret = sysconfig_cmd_read(priv, lsc_read_status, sizeof(lsc_read_status),
> +				 &device_status, sizeof(device_status));
> +	if (ret)
> +		return ret;
> +
> +	*status = be32_to_cpu(device_status);
> +
> +	return 0;
> +}
> +
> +static int sysconfig_poll_status(struct sysconfig_priv *priv, u32 *status)
> +{
> +	int ret = sysconfig_poll_busy(priv);
> +
> +	if (ret)
> +		return ret;
> +
> +	return sysconfig_read_status(priv, status);
> +}
> +
> +static int sysconfig_poll_gpio(struct gpio_desc *gpio, bool is_active)
> +{
> +	size_t retries = SYSCONFIG_POLL_RETRIES;
> +	int value;
> +
> +	while (retries--) {

Same concern.

> +		value = gpiod_get_value(gpio);
> +		if (value < 0)
> +			return value;
> +
> +		if ((is_active && value) || (!is_active && !value))
> +			return 0;
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int sysconfig_gpio_refresh(struct sysconfig_priv *priv)
> +{
> +	struct gpio_desc *program = priv->program;
> +	struct gpio_desc *init = priv->init;
> +	struct gpio_desc *done = priv->done;
> +	int ret;
> +
> +	/* Enter init mode */
> +	gpiod_set_value(program, 1);
> +
> +	ret = sysconfig_poll_gpio(init, true);
> +	if (!ret)
> +		ret = sysconfig_poll_gpio(done, false);
> +
> +	if (ret)
> +		return ret;
> +
> +	/* Enter program mode */
> +	gpiod_set_value(program, 0);
> +
> +	return sysconfig_poll_gpio(init, false);
> +}
> +
> +static int sysconfig_lsc_refresh(struct sysconfig_priv *priv)
> +{
> +	static const u8 lsc_refresh[] = SYSCONFIG_LSC_REFRESH;
> +	int ret;
> +
> +	ret = sysconfig_cmd_write(priv, lsc_refresh, sizeof(lsc_refresh));
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(4000, 8000);
> +
> +	return 0;
> +}
> +
> +static int sysconfig_refresh(struct sysconfig_priv *priv)
> +{
> +	struct gpio_desc *program = priv->program;
> +	struct gpio_desc *init = priv->init;
> +	struct gpio_desc *done = priv->done;
> +
> +	if (program && init && done)
> +		return sysconfig_gpio_refresh(priv);
> +
> +	return sysconfig_lsc_refresh(priv);
> +}
> +
> +static int sysconfig_isc_enable(struct sysconfig_priv *priv)
> +{
> +	u8 isc_enable[] = SYSCONFIG_ISC_ENABLE;
> +	u32 status;
> +	int ret;
> +
> +	ret = sysconfig_cmd_write(priv, isc_enable, sizeof(isc_enable));
> +	if (ret)
> +		return ret;
> +
> +	ret = sysconfig_poll_status(priv, &status);
> +	if (ret || (status & SYSCONFIG_STATUS_FAIL))
> +		return ret ? : -EFAULT;

If (ret == 0 && status == SYSCONFIG_STATUS_FAIL), still return 0?

> +
> +	return 0;
> +}
> +
> +static int sysconfig_isc_erase(struct sysconfig_priv *priv)
> +{
> +	u8 isc_erase[] = SYSCONFIG_ISC_ERASE;
> +	u32 status;
> +	int ret;
> +
> +	ret = sysconfig_cmd_write(priv, isc_erase, sizeof(isc_erase));
> +	if (ret)
> +		return ret;
> +
> +	ret = sysconfig_poll_status(priv, &status);
> +	if (ret || (status & SYSCONFIG_STATUS_FAIL))

Same concern.

> +		return ret ? : -EFAULT;
> +
> +	return 0;
> +}
> +
> +static int sysconfig_isc_init(struct sysconfig_priv *priv)
> +{
> +	int ret = sysconfig_isc_enable(priv);
> +
> +	if (ret)
> +		return ret;
> +
> +	return sysconfig_isc_erase(priv);
> +}
> +
> +static int sysconfig_lsc_init_addr(struct sysconfig_priv *priv)
> +{
> +	const u8 lsc_init_addr[] = SYSCONFIG_LSC_INIT_ADDR;
> +
> +	return sysconfig_cmd_write(priv, lsc_init_addr, sizeof(lsc_init_addr));
> +}
> +
> +static int sysconfig_burst_write_init(struct sysconfig_priv *priv)
> +{
> +	if (priv->bitstream_burst_write_init)

Check these callbacks on probe rather than on every writing.

> +		return priv->bitstream_burst_write_init(priv);
> +
> +	return 0;
> +}
> +
> +static int sysconfig_burst_write_complete(struct sysconfig_priv *priv)
> +{
> +	if (priv->bitstream_burst_write_complete)

Same concern.

> +		return priv->bitstream_burst_write_complete(priv);
> +
> +	return 0;
> +}
> +
> +static int sysconfig_bitstream_burst_write(struct sysconfig_priv *priv,
> +					   const char *buf, size_t count)
> +{
> +	int ret;
> +
> +	if (priv->bitstream_burst_write)

Same concern.

> +		ret = priv->bitstream_burst_write(priv, buf, count);
> +	else
> +		ret = -EOPNOTSUPP;
> +
> +	if (ret)
> +		sysconfig_burst_write_complete(priv);
> +
> +	return ret;
> +}
> +
> +static int sysconfig_isc_disable(struct sysconfig_priv *priv)
> +{
> +	const u8 isc_disable[] = SYSCONFIG_ISC_DISABLE;
> +
> +	return sysconfig_cmd_write(priv, isc_disable, sizeof(isc_disable));
> +}
> +
> +static void sysconfig_cleanup(struct sysconfig_priv *priv)
> +{
> +	sysconfig_isc_erase(priv);
> +	sysconfig_refresh(priv);
> +}
> +
> +static int sysconfig_isc_finish(struct sysconfig_priv *priv)
> +{
> +	struct gpio_desc *done_gpio = priv->done;
> +	u32 status;
> +	int ret;
> +
> +	if (done_gpio) {
> +		ret = sysconfig_isc_disable(priv);
> +		if (ret)
> +			return ret;
> +
> +		return sysconfig_poll_gpio(done_gpio, true);
> +	}
> +
> +	ret = sysconfig_poll_status(priv, &status);
> +	if (ret)
> +		return ret;
> +
> +	if ((status & SYSCONFIG_STATUS_DONE) &&
> +	    !(status & SYSCONFIG_STATUS_BUSY) &&
> +	    !(status & SYSCONFIG_STATUS_ERR))
> +		return sysconfig_isc_disable(priv);
> +
> +	return -EFAULT;
> +}
> +
> +static enum fpga_mgr_states sysconfig_ops_state(struct fpga_manager *mgr)
> +{
> +	struct sysconfig_priv *priv = mgr->priv;
> +	struct gpio_desc *done = priv->done;
> +	u32 status;
> +	int ret;
> +
> +	if (done && (gpiod_get_value(done) > 0))
> +		return FPGA_MGR_STATE_OPERATING;
> +
> +	ret = sysconfig_read_status(priv, &status);
> +	if (!ret && (status & SYSCONFIG_STATUS_DONE))
> +		return FPGA_MGR_STATE_OPERATING;
> +
> +	return FPGA_MGR_STATE_UNKNOWN;
> +}
> +
> +static int sysconfig_ops_write_init(struct fpga_manager *mgr,
> +				    struct fpga_image_info *info,
> +				    const char *buf, size_t count)
> +{
> +	struct sysconfig_priv *priv = mgr->priv;
> +	struct device *dev = &mgr->dev;
> +	int ret;
> +
> +	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
> +		dev_err(dev, "Partial reconfiguration is not supported\n");
> +		return -EOPNOTSUPP;
> +	}
> +
> +	/* Enter program mode */
> +	ret = sysconfig_refresh(priv);
> +	if (ret) {
> +		dev_err(dev, "Failed to go to program mode\n");
> +		return ret;
> +	}
> +
> +	/* Enter ISC mode */
> +	ret = sysconfig_isc_init(priv);
> +	if (ret) {
> +		dev_err(dev, "Failed to go to ISC mode\n");
> +		return ret;
> +	}
> +
> +	/* Initialize the Address Shift Register */
> +	ret = sysconfig_lsc_init_addr(priv);
> +	if (ret) {
> +		dev_err(dev,
> +			"Failed to initialize the Address Shift Register\n");
> +		return ret;
> +	}
> +
> +	/* Prepare for bitstream burst write */
> +	ret = sysconfig_burst_write_init(priv);
> +	if (ret)
> +		dev_err(dev, "Failed to prepare for bitstream burst write\n");
> +
> +	return ret;
> +}
> +
> +static int sysconfig_ops_write(struct fpga_manager *mgr, const char *buf,
> +			       size_t count)
> +{
> +	return sysconfig_bitstream_burst_write(mgr->priv, buf, count);
> +}
> +
> +static int sysconfig_ops_write_complete(struct fpga_manager *mgr,
> +					struct fpga_image_info *info)
> +{
> +	struct sysconfig_priv *priv = mgr->priv;
> +	struct device *dev = &mgr->dev;
> +	int ret;
> +
> +	ret = sysconfig_burst_write_complete(priv);
> +	if (!ret)
> +		ret = sysconfig_poll_busy(priv);
> +
> +	if (ret) {
> +		dev_err(dev, "Error while waiting bitstream write to finish\n");
> +		goto fail;
> +	}
> +
> +	ret = sysconfig_isc_finish(priv);
> +
> +fail:
> +	if (ret)
> +		sysconfig_cleanup(priv);
> +
> +	return ret;
> +}
> +
> +static const struct fpga_manager_ops sysconfig_fpga_mgr_ops = {
> +	.state = sysconfig_ops_state,
> +	.write_init = sysconfig_ops_write_init,
> +	.write = sysconfig_ops_write,
> +	.write_complete = sysconfig_ops_write_complete,
> +};
> +
> +int sysconfig_probe(struct sysconfig_priv *priv)
> +{
> +	struct gpio_desc *program, *init, *done;
> +	struct device *dev = priv->dev;
> +	struct fpga_manager *mgr;
> +	int ret;
> +
> +	if (!dev)
> +		return -ENODEV;
> +
> +	program = devm_gpiod_get_optional(dev, "program", GPIOD_OUT_LOW);
> +	if (IS_ERR(program)) {
> +		ret = PTR_ERR(program);
> +		dev_err(dev, "Failed to get PROGRAM GPIO: %d\n", ret);
> +		return ret;
> +	}
> +
> +	init = devm_gpiod_get_optional(dev, "init", GPIOD_IN);
> +	if (IS_ERR(init)) {
> +		ret = PTR_ERR(init);
> +		dev_err(dev, "Failed to get INIT GPIO: %d\n", ret);
> +		return ret;
> +	}
> +
> +	done = devm_gpiod_get_optional(dev, "done", GPIOD_IN);
> +	if (IS_ERR(done)) {
> +		ret = PTR_ERR(done);
> +		dev_err(dev, "Failed to get DONE GPIO: %d\n", ret);
> +		return ret;
> +	}
> +
> +	priv->program = program;
> +	priv->init = init;
> +	priv->done = done;
> +
> +	mgr = devm_fpga_mgr_register(dev, "Lattice sysCONFIG FPGA Manager",
> +				     &sysconfig_fpga_mgr_ops, priv);
> +
> +	return PTR_ERR_OR_ZERO(mgr);
> +}
> +EXPORT_SYMBOL(sysconfig_probe);
> +
> +MODULE_DESCRIPTION("Lattice sysCONFIG FPGA Manager Core");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/fpga/lattice-sysconfig.h b/drivers/fpga/lattice-sysconfig.h
> new file mode 100644
> index 000000000000..e85c2ae65965
> --- /dev/null
> +++ b/drivers/fpga/lattice-sysconfig.h
> @@ -0,0 +1,40 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef	__LATTICE_SYSCONFIG_H
> +#define	__LATTICE_SYSCONFIG_H
> +
> +#define	SYSCONFIG_ISC_ENABLE		{0xC6, 0x00, 0x00, 0x00}
> +#define	SYSCONFIG_ISC_DISABLE		{0x26, 0x00, 0x00, 0x00}
> +#define	SYSCONFIG_ISC_ERASE		{0x0E, 0x01, 0x00, 0x00}
> +#define	SYSCONFIG_LSC_READ_STATUS	{0x3C, 0x00, 0x00, 0x00}
> +#define	SYSCONFIG_LSC_CHECK_BUSY	{0xF0, 0x00, 0x00, 0x00}
> +#define	SYSCONFIG_LSC_REFRESH		{0x79, 0x00, 0x00, 0x00}
> +#define	SYSCONFIG_LSC_INIT_ADDR		{0x46, 0x00, 0x00, 0x00}
> +#define	SYSCONFIG_LSC_BITSTREAM_BURST	{0x7a, 0x00, 0x00, 0x00}
> +
> +#define	SYSCONFIG_STATUS_DONE		BIT(8)
> +#define	SYSCONFIG_STATUS_BUSY		BIT(12)
> +#define	SYSCONFIG_STATUS_FAIL		BIT(13)
> +#define	SYSCONFIG_STATUS_ERR		(BIT(23) | BIT(24) | BIT(25))

If you don't want to specify every bit, then GENMASK(25, 23),
or define every bit and '|' them.

Thanks,
Yilun

> +
> +#define	SYSCONFIG_POLL_RETRIES		1000000
> +#define	SYSCONFIG_POLL_INTERVAL_US	30
> +
> +struct sysconfig_priv {
> +	struct gpio_desc *program;
> +	struct gpio_desc *init;
> +	struct gpio_desc *done;
> +	struct device *dev;
> +	int (*command_write)(struct sysconfig_priv *priv,
> +			     const void *tx_buf, size_t tx_len);
> +	int (*command_read)(struct sysconfig_priv *priv, const void *tx_buf,
> +			    size_t tx_len, void *rx_buf, size_t rx_len);
> +	int (*bitstream_burst_write_init)(struct sysconfig_priv *priv);
> +	int (*bitstream_burst_write)(struct sysconfig_priv *priv,
> +				     const char *tx_buf, size_t tx_len);
> +	int (*bitstream_burst_write_complete)(struct sysconfig_priv *priv);
> +};
> +
> +int sysconfig_probe(struct sysconfig_priv *priv);
> +
> +#endif /* __LATTICE_SYSCONFIG_H */
> -- 
> 2.37.3
> 
> 



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux