Add support to the FPGA manager for programming Microchip Polarfire
FPGAs over slave SPI interface with .dat formatted bitsream image.
Changelog:
v1 -> v2: fix printk formating
v2 -> v3:
* replace "microsemi" with "microchip"
* replace prefix "microsemi_fpga_" with "mpf_"
* more sensible .compatible and .name strings
* remove unused defines STATUS_SPI_VIOLATION and STATUS_SPI_ERROR
v3 -> v4: fix unused variable warning
Put 'mpf_of_ids' definition under conditional compilation, so it
would not hang unused if CONFIG_OF is not enabled.
v4 -> v5:
* prefix defines with MPF_
* mdelay() -> usleep_range()
* formatting fixes
* add DT bindings doc
* rework fpga_manager_ops.write() to fpga_manager_ops.write_sg()
We can't parse image header in write_init() because image header
size is not known beforehand. Thus parsing need to be done in
fpga_manager_ops.write() callback, but fpga_manager_ops.write()
also need to be reenterable. On the other hand,
fpga_manager_ops.write_sg() is called once. Thus, rework usage of
write() callback to write_sg().
v5 -> v6: fix patch applying
I forgot to clean up unrelated local changes which lead to error on
patch 0001-fpga-microchip-spi-add-Microchip-MPF-FPGA-manager.patch
applying on vanilla kernel.
v6 -> v7: fix binding doc to pass dt_binding_check
v7 -> v8: another fix for dt_binding_check warning
v8 -> v9:
* add another patch to support bitstream offset in FPGA image buffer
* rework fpga_manager_ops.write_sg() back to fpga_manager_ops.write()
* move image header parsing from write() to write_init()
v9 -> v10:
* add parse_header() callback to fpga_manager_ops
* adjust fpga_mgr_write_init[_buf|_sg]() for parse_header() usage
* implement parse_header() in microchip-spi driver
v10 -> v11: include missing unaligned.h to microchip-spi
fix error: implicit declaration of function 'get_unaligned_le[16|32]'
v11 -> v12:
* microchip-spi: double read hw status, ignore first read, because it
can be unreliable.
* microchip-spi: remove sleep between status readings in
poll_status_not_busy() to save a few seconds. Status is polled on
every 16 byte writes - that is quite often, therefore
usleep_range() accumulate to a considerable number of seconds.
v12 -> v13:
* fpga-mgr: separate fpga_mgr_parse_header_buf() from
fpga_mgr_write_init_buf()
* fpga-mgr: introduce FPGA_MGR_STATE_PARSE_HEADER and
FPGA_MGR_STATE_PARSE_HEADER_ERR fpga_mgr_states
* fpga-mgr: rename fpga_mgr_write_init_sg() to fpga_mgr_prepare_sg()
and rework with respect to a new fpga_mgr_parse_header_buf()
* fpga-mgr: rework write accounting in fpga_mgr_buf_load_sg() for
better clarity
* microchip-spi: rename MPF_STATUS_POLL_TIMEOUT to
MPF_STATUS_POLL_RETRIES
* microchip-spi: add comment about status reading quirk to
mpf_read_status()
* microchip-spi: rename poll_status_not_busy() to mpf_poll_status()
and add comment.
* microchip-spi: make if statement in mpf_poll_status() easier to
read.
v13 -> v14:
* fpga-mgr: improvements from Xu Yilun in
- fpga_mgr_parse_header_buf()
- fpga_mgr_write_init_buf()
- fpga_mgr_prepare_sg()
- fpga_mgr_buf_load_sg()
* fpga-mgr: add check for -EAGAIN from fpga_mgr_parse_header_buf()
when called from fpga_mgr_buf_load_mapped()
* microchip-spi: remove excessive cs_change from second spi_transfer
in mpf_read_status()
* microchip-spi: change type of components_size_start,
bitstream_start, i from size_t to u32 in mpf_ops_parse_header()
Ivan Bornyakov (3):
fpga: fpga-mgr: support bitstream offset in image buffer
fpga: microchip-spi: add Microchip MPF FPGA manager
dt-bindings: fpga: add binding doc for microchip-spi fpga mgr
.../fpga/microchip,mpf-spi-fpga-mgr.yaml | 44 ++
drivers/fpga/Kconfig | 9 +
drivers/fpga/Makefile | 1 +
drivers/fpga/fpga-mgr.c | 176 ++++++--
drivers/fpga/microchip-spi.c | 384 ++++++++++++++++++
include/linux/fpga/fpga-mgr.h | 17 +-
6 files changed, 603 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
create mode 100644 drivers/fpga/microchip-spi.c
--
2.35.1
