Re: [PATCH V9 XRT Alveo 01/14] Documentation: fpga: Add a document describing XRT Alveo drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Rob,

Please help with the review of the proposed FDT usage by Alveo/XRT drivers.

Thanks,
Lizhi

On 10/13/21 7:21 PM, Xu Yilun wrote:
CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.


+.. _device_tree_usage:
+
+Device Tree Usage
+-----------------
+
+The xsabin file stores metadata which advertise HW subsystems present in a
+partition. The metadata is stored in device tree format with a well defined
+schema. XRT management driver uses this information to bind *xrt_drivers* to
+the subsystem instantiations. The xrt_drivers are found in **xrt-lib.ko** kernel
+module.
I'm still catching up the patchset from the very beginning, and just
finished the Documentation part. So far, I see the DT usage concern
which may impact the architecure a lot, so I should raise it ASAP.

The concern raised by the DT maintainer:
https://lore.kernel.org/linux-fpga/CAL_JsqLod6FBGFhu7WXtMrB_z7wj8-up0EetM1QS9M3gjm8d7Q@xxxxxxxxxxxxxx/

First of all, directly parsing FDT in device drivers is not a normal usage of DT
in linux. It is out of the current DT usage model. So it should be agreed by DT
maintainers.
Thanks for reviewing XRT document and providing feedback.
Here is the reply from Sonal for Rob’s question:
https://lore.kernel.org/linux-fpga/BY5PR02MB62604B87C66A1AD139A6F153BBF40@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
Overall, libfdt is used by XRT driver to parse the metadata which comes with
an Alveo board.
When XRT driver discovers an Alveo board, it will read a fdt blob from board
firmware file resident on the host.
By parsing the fdt blob, XRT driver gets information about this Alveo board,
such as version, uuid, IPs exposed to PCI BAR, interrupt binding etc.
So libfdt is used simply as Alveo metadata parser here. XRT drivers do not
interact with system wide DT or present the Alveo device tree to host. For
many systems like x86_64, system wide DT is not present but libfdt parsing
services will still be needed.
Yes, I understand the use case.

My concern is, directly parsing an isolated FDT in device driver and
populate sub devices, skipping the unflattening, this is a new working
model of device tree usage, but for the same purpose as the existing
one.

So I really need the confirmation of DT maintainers.

Current FPGA framework modifies kernel's live tree by DT overlay, when FPGA is
dynamically reprogrammed and new HW devices appear. See
Documentation/devicetree/bindings/fpga/fpga-region.txt.

Then something less important:

    1. The bindings should be documented in Documentation/devicetree/bindings/.
    2. Are all the example DT usage conform to the exsiting bindings? I
       didn't go through all device classes, but remember like the
       interrupt-controller should have a "interrupt-controller" property, and
       the PCI properties are also different from PCI bindings.
The fdt properties are defined for Alveo firmware files. XRT driver is the
only consumer of this data. I am wondering if
Personally I don't like the idea of a different binding definition set,
even if the new device tree usage is accepted. We all use device tree
for device enumeration, so why the different definitions.

Thanks,
Yilun

Documentation/devicetree/bindings is the right place for Alveo/XRT private
format or should it be documented as part of XRT driver documentation?
Looking for guidance here.


Thanks,

Lizhi

Thanks,
Yilun

+
+Logic UUID
+^^^^^^^^^^
+A partition is identified uniquely through ``logic_uuid`` property::
+
+  /dts-v1/;
+  / {
+      logic_uuid = "0123456789abcdef0123456789abcdef";
+      ...
+    }
+
+Schema Version
+^^^^^^^^^^^^^^
+Schema version is defined through the ``schema_version`` node. It contains
+``major`` and ``minor`` properties as below::
+
+  /dts-v1/;
+  / {
+       schema_version {
+           major = <0x01>;
+           minor = <0x00>;
+       };
+       ...
+    }
+
+.. _partition_uuids:
+
+Partition UUIDs
+^^^^^^^^^^^^^^^
+Each partition may have parent and child UUIDs. These UUIDs are
+defined by ``interfaces`` node and ``interface_uuid`` property::
+
+  /dts-v1/;
+  / {
+       interfaces {
+           @0 {
+                  interface_uuid = "0123456789abcdef0123456789abcdef";
+           };
+           @1 {
+                  interface_uuid = "fedcba9876543210fedcba9876543210";
+           };
+           ...
+        };
+       ...
+    }
+
+
+Subsystem Instantiations
+^^^^^^^^^^^^^^^^^^^^^^^^
+Subsystem instantiations are captured as children of ``addressable_endpoints``
+node::
+
+  /dts-v1/;
+  / {
+       addressable_endpoints {
+           abc {
+               ...
+           };
+           def {
+               ...
+           };
+           ...
+       }
+  }
+
+Subnode 'abc' and 'def' are the name of subsystem nodes
+
+Subsystem Node
+^^^^^^^^^^^^^^
+Each subsystem node and its properties define a hardware instance::
+
+
+  addressable_endpoints {
+      abc {
+          reg = <0x00 0x1f05000 0x00 0x1000>>
+          pcie_physical_function = <0x0>;
+          pcie_bar_mapping = <0x2>;
+          compatible = "abc def";
+          interrupts = <0x09 0x0c>;
+          firmware {
+              firmware_product_name = "abc"
+              firmware_branch_name = "def"
+              firmware_version_major = <1>
+              firmware_version_minor = <2>
+          };
+      }
+      ...
+  }
+
+:reg:
+ Property defines an address range. `<0x00 0x1f05000 0x00 0x1000>` indicates
+ *0x00 0x1f05000* as BAR offset and *0x00 0x1000* as address length.
+:pcie_physical_function:
+ Property specifies which PCIe physical function the subsystem node resides.
+ `<0x0>` implies physical function 0.
+:pcie_bar_mapping:
+ Property specifies which PCIe BAR the subsystem node resides. `<0x2>` implies
+ BAR 2. A value of 0 means the property is not defined.
+:compatible:
+ Property is a list of strings. The first string in the list specifies the exact
+ subsystem node. The following strings represent other devices that the device
+ is compatible with.
+:interrupts:
+ Property specifies start and end interrupts for this subsystem node.
+ `<0x09 0x0c>` implies interrupts 9 to 13 are used by this subsystem.
+:firmware:
+ Subnode defines the firmware required by this subsystem node.
+
+Alveo U50 Platform Example
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+::
+
+  /dts-v1/;
+
+  /{
+        logic_uuid = "f465b0a3ae8c64f619bc150384ace69b";
+
+        schema_version {
+                major = <0x01>;
+                minor = <0x00>;
+        };
+
+        interfaces {
+
+                @0 {
+                        interface_uuid = "862c7020a250293e32036f19956669e5";
+                };
+        };
+
+        addressable_endpoints {
+
+                ep_blp_rom_00 {
+                        reg = <0x00 0x1f04000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
+                };
+
+                ep_card_flash_program_00 {
+                        reg = <0x00 0x1f06000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_quad_spi-1.0\0axi_quad_spi";
+                        interrupts = <0x03 0x03>;
+                };
+
+                ep_cmc_firmware_mem_00 {
+                        reg = <0x00 0x1e20000 0x00 0x20000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
+
+                        firmware {
+                                firmware_product_name = "cmc";
+                                firmware_branch_name = "u50";
+                                firmware_version_major = <0x01>;
+                                firmware_version_minor = <0x00>;
+                        };
+                };
+
+                ep_cmc_intc_00 {
+                        reg = <0x00 0x1e03000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_intc-1.0\0axi_intc";
+                        interrupts = <0x04 0x04>;
+                };
+
+                ep_cmc_mutex_00 {
+                        reg = <0x00 0x1e02000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_cmc_regmap_00 {
+                        reg = <0x00 0x1e08000 0x00 0x2000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
+
+                        firmware {
+                                firmware_product_name = "sc-fw";
+                                firmware_branch_name = "u50";
+                                firmware_version_major = <0x05>;
+                        };
+                };
+
+                ep_cmc_reset_00 {
+                        reg = <0x00 0x1e01000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_ddr_mem_calib_00 {
+                        reg = <0x00 0x63000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_debug_bscan_mgmt_00 {
+                        reg = <0x00 0x1e90000 0x00 0x10000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-debug_bridge-1.0\0debug_bridge";
+                };
+
+                ep_ert_base_address_00 {
+                        reg = <0x00 0x21000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_ert_command_queue_mgmt_00 {
+                        reg = <0x00 0x40000 0x00 0x10000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-ert_command_queue-1.0\0ert_command_queue";
+                };
+
+                ep_ert_command_queue_user_00 {
+                        reg = <0x00 0x40000 0x00 0x10000>;
+                        pcie_physical_function = <0x01>;
+                        compatible = "xilinx.com,reg_abs-ert_command_queue-1.0\0ert_command_queue";
+                };
+
+                ep_ert_firmware_mem_00 {
+                        reg = <0x00 0x30000 0x00 0x8000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
+
+                        firmware {
+                                firmware_product_name = "ert";
+                                firmware_branch_name = "v20";
+                                firmware_version_major = <0x01>;
+                        };
+                };
+
+                ep_ert_intc_00 {
+                        reg = <0x00 0x23000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_intc-1.0\0axi_intc";
+                        interrupts = <0x05 0x05>;
+                };
+
+                ep_ert_reset_00 {
+                        reg = <0x00 0x22000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_ert_sched_00 {
+                        reg = <0x00 0x50000 0x00 0x1000>;
+                        pcie_physical_function = <0x01>;
+                        compatible = "xilinx.com,reg_abs-ert_sched-1.0\0ert_sched";
+                        interrupts = <0x09 0x0c>;
+                };
+
+                ep_fpga_configuration_00 {
+                        reg = <0x00 0x1e88000 0x00 0x8000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_hwicap-1.0\0axi_hwicap";
+                        interrupts = <0x02 0x02>;
+                };
+
+                ep_icap_reset_00 {
+                        reg = <0x00 0x1f07000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_msix_00 {
+                        reg = <0x00 0x00 0x00 0x20000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-msix-1.0\0msix";
+                        pcie_bar_mapping = <0x02>;
+                };
+
+                ep_pcie_link_mon_00 {
+                        reg = <0x00 0x1f05000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_pr_isolate_plp_00 {
+                        reg = <0x00 0x1f01000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_pr_isolate_ulp_00 {
+                        reg = <0x00 0x1000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
+                };
+
+                ep_uuid_rom_00 {
+                        reg = <0x00 0x64000 0x00 0x1000>;
+                        pcie_physical_function = <0x00>;
+                        compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
+                };
+
+                ep_xdma_00 {
+                        reg = <0x00 0x00 0x00 0x10000>;
+                        pcie_physical_function = <0x01>;
+                        compatible = "xilinx.com,reg_abs-xdma-1.0\0xdma";
+                        pcie_bar_mapping = <0x02>;
+                };
+        };
+
+  }
+
+
+
+Deployment Models
+=================
+
+Baremetal
+---------
+
+In bare-metal deployments, both MPF and UPF are visible and accessible. The
+xrt-mgmt driver binds to MPF. The xrt-mgmt driver operations are privileged and
+available to system administrator. The full stack is illustrated below::
+
+                            HOST
+
+               [XRT-MGMT]         [XRT-USER]
+                    |                  |
+                    |                  |
+                 +-----+            +-----+
+                 | MPF |            | UPF |
+                 |     |            |     |
+                 | PF0 |            | PF1 |
+                 +--+--+            +--+--+
+          ......... ^................. ^..........
+                    |                  |
+                    |   PCIe DEVICE    |
+                    |                  |
+                 +--+------------------+--+
+                 |         SHELL          |
+                 |                        |
+                 +------------------------+
+                 |         USER           |
+                 |                        |
+                 |                        |
+                 |                        |
+                 |                        |
+                 +------------------------+
+
+
+
+Virtualized
+-----------
+
+In virtualized deployments, the privileged MPF is assigned to the host but the
+unprivileged UPF is assigned to a guest VM via PCIe pass-through. The xrt-mgmt
+driver in host binds to MPF. The xrt-mgmt driver operations are privileged and
+only accessible to the MPF. The full stack is illustrated below::
+
+
+                                 ..............
+                  HOST           .    VM      .
+                                 .            .
+               [XRT-MGMT]        . [XRT-USER] .
+                    |            .     |      .
+                    |            .     |      .
+                 +-----+         .  +-----+   .
+                 | MPF |         .  | UPF |   .
+                 |     |         .  |     |   .
+                 | PF0 |         .  | PF1 |   .
+                 +--+--+         .  +--+--+   .
+          ......... ^................. ^..........
+                    |                  |
+                    |   PCIe DEVICE    |
+                    |                  |
+                 +--+------------------+--+
+                 |         SHELL          |
+                 |                        |
+                 +------------------------+
+                 |         USER           |
+                 |                        |
+                 |                        |
+                 |                        |
+                 |                        |
+                 +------------------------+
+
+
+
+
+
+Platform Security Considerations
+================================
+
+`Security of Alveo Platform <https://xilinx.github.io/XRT/master/html/security.html>`_
+discusses the deployment options and security implications in great detail.
diff --git a/MAINTAINERS b/MAINTAINERS
index 056966c9aac9..beeaf0257364 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7274,6 +7274,17 @@ F:     Documentation/fpga/
   F:   drivers/fpga/
   F:   include/linux/fpga/

+FPGA XRT DRIVERS
+M:   Lizhi Hou <lizhi.hou@xxxxxxxxxx>
+R:   Max Zhen <max.zhen@xxxxxxxxxx>
+R:   Sonal Santan <sonal.santan@xxxxxxxxxx>
+L:   linux-fpga@xxxxxxxxxxxxxxx
+S:   Supported
+W:   https://github.com/Xilinx/XRT
+F:   Documentation/fpga/xrt.rst
+F:   drivers/fpga/xrt/
+F:   include/uapi/linux/xrt/
+
   FPU EMULATOR
   M:   Bill Metzenthen <billm@xxxxxxxxxxxxx>
   S:   Maintained
--
2.27.0



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux